All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Nemesa Garg <nemesa.garg@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: Re: [PATCH v5 2/6] drm/i915/display: Add gmch_panel_fitting in all encoders
Date: Fri, 22 Nov 2024 20:48:56 +0200	[thread overview]
Message-ID: <Z0DSGC5FF0Wdbxyh@intel.com> (raw)
In-Reply-To: <20241120053838.3794419-3-nemesa.garg@intel.com>

On Wed, Nov 20, 2024 at 11:08:34AM +0530, Nemesa Garg wrote:
> For all encoders add gmch_panel_fitting and remove
> pch_panel_fitting as it will be called from pipe_config
> after joiner calculation is done.
> 
> -v5: Nuke GMCH check from few places [Ville]
> 
> Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c    |  4 ----
>  drivers/gpu/drm/i915/display/intel_dp.c   |  6 +++---
>  drivers/gpu/drm/i915/display/intel_hdmi.c |  6 ------
>  drivers/gpu/drm/i915/display/intel_lvds.c | 10 ++++++----
>  drivers/gpu/drm/i915/display/intel_pfit.c | 15 ++++++++-------
>  drivers/gpu/drm/i915/display/intel_pfit.h |  6 ++++--
>  drivers/gpu/drm/i915/display/vlv_dsi.c    |  9 ++++++---
>  7 files changed, 27 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 74ab3d1a1622..30c2393d9f30 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1651,10 +1651,6 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
>  	if (ret)
>  		return ret;
>  
> -	ret = intel_panel_fitting(pipe_config, conn_state);
> -	if (ret)
> -		return ret;
> -

I don't you adding the pch_panel_fitting() call anywhere,
so this patch looks completely broken on ilk+.

>  	adjusted_mode->flags = 0;
>  
>  	/* Dual link goes to trancoder DSI'0' */
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 053a9a4182e7..0b1ff6291e74 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3090,6 +3090,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  			struct intel_crtc_state *pipe_config,
>  			struct drm_connector_state *conn_state)
>  {
> +	struct intel_display *display = to_intel_display(encoder);
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
>  	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> @@ -3131,9 +3132,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (ret)
>  		return ret;
>  
> -	if ((intel_dp_is_edp(intel_dp) && fixed_mode) ||
> -	    pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> -		ret = intel_panel_fitting(pipe_config, conn_state);
> +	if (HAS_GMCH(display)) {
> +		ret = intel_gmch_panel_fitting(pipe_config, conn_state);
>  		if (ret)
>  			return ret;
>  	}
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 23c270a8c4aa..20fb1bd44b4f 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2374,12 +2374,6 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
>  		return ret;
>  	}
>  
> -	if (intel_hdmi_is_ycbcr420(pipe_config)) {
> -		ret = intel_panel_fitting(pipe_config, conn_state);
> -		if (ret)
> -			return ret;
> -	}
> -
>  	pipe_config->limited_color_range =
>  		intel_hdmi_limited_color_range(pipe_config, conn_state);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
> index 6d7637ad980a..92f0b7b76cc7 100644
> --- a/drivers/gpu/drm/i915/display/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/display/intel_lvds.c
> @@ -416,6 +416,7 @@ static int intel_lvds_compute_config(struct intel_encoder *encoder,
>  				     struct intel_crtc_state *crtc_state,
>  				     struct drm_connector_state *conn_state)
>  {
> +	struct intel_display *display = to_intel_display(encoder);
>  	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
>  	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
>  	struct intel_connector *connector = lvds_encoder->attached_connector;
> @@ -465,10 +466,11 @@ static int intel_lvds_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> -	ret = intel_panel_fitting(crtc_state, conn_state);
> -	if (ret)
> -		return ret;
> -
> +	if (HAS_GMCH(display)) {
> +		ret = intel_gmch_panel_fitting(crtc_state, conn_state);
> +		if (ret)
> +			return ret;
> +	}
>  	/*
>  	 * XXX: It would be nice to support lower refresh rates on the
>  	 * panels to reduce power consumption, and perhaps match the
> diff --git a/drivers/gpu/drm/i915/display/intel_pfit.c b/drivers/gpu/drm/i915/display/intel_pfit.c
> index e214e19f8174..fb6387b537b7 100644
> --- a/drivers/gpu/drm/i915/display/intel_pfit.c
> +++ b/drivers/gpu/drm/i915/display/intel_pfit.c
> @@ -545,13 +545,14 @@ static int gmch_panel_fitting(struct intel_crtc_state *crtc_state,
>  	return intel_gmch_pfit_check_timings(crtc_state);
>  }
>  
> -int intel_panel_fitting(struct intel_crtc_state *crtc_state,
> -			const struct drm_connector_state *conn_state)
> +int intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
> +			     const struct drm_connector_state *conn_state)
>  {
> -	struct intel_display *display = to_intel_display(crtc_state);
> +	return gmch_panel_fitting(crtc_state, conn_state);
> +}
>  
> -	if (HAS_GMCH(display))
> -		return gmch_panel_fitting(crtc_state, conn_state);
> -	else
> -		return pch_panel_fitting(crtc_state, conn_state);
> +int intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
> +			    const struct drm_connector_state *conn_state)
> +{
> +	return pch_panel_fitting(crtc_state, conn_state);
>  }
> diff --git a/drivers/gpu/drm/i915/display/intel_pfit.h b/drivers/gpu/drm/i915/display/intel_pfit.h
> index add8d78de2c9..1365ab86c89c 100644
> --- a/drivers/gpu/drm/i915/display/intel_pfit.h
> +++ b/drivers/gpu/drm/i915/display/intel_pfit.h
> @@ -9,7 +9,9 @@
>  struct drm_connector_state;
>  struct intel_crtc_state;
>  
> -int intel_panel_fitting(struct intel_crtc_state *crtc_state,
> -			const struct drm_connector_state *conn_state);
> +int intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
> +			     const struct drm_connector_state *conn_state);
> +int intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
> +			    const struct drm_connector_state *conn_state);
>  
>  #endif /* __INTEL_PFIT_H__ */
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index d49e9b3c7627..6de10f5722b4 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -269,6 +269,7 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
>  				    struct intel_crtc_state *pipe_config,
>  				    struct drm_connector_state *conn_state)
>  {
> +	struct intel_display *display = to_intel_display(encoder);
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
>  	struct intel_connector *intel_connector = intel_dsi->attached_connector;
> @@ -283,9 +284,11 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
>  	if (ret)
>  		return ret;
>  
> -	ret = intel_panel_fitting(pipe_config, conn_state);
> -	if (ret)
> -		return ret;
> +	if (HAS_GMCH(display)) {
> +		ret = intel_gmch_panel_fitting(pipe_config, conn_state);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
> -- 
> 2.25.1

-- 
Ville Syrjälä
Intel

  parent reply	other threads:[~2024-11-22 18:49 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-20  5:38 [PATCH 0/6] Consider joiner calculation for panel fitting Nemesa Garg
2024-11-20  5:38 ` [PATCH 1/6] drm/i915/display: Disable joiner and pfit Nemesa Garg
2024-11-22 18:45   ` Ville Syrjälä
2024-11-20  5:38 ` [PATCH v5 2/6] drm/i915/display: Add gmch_panel_fitting in all encoders Nemesa Garg
2024-11-22 18:47   ` Ville Syrjälä
2024-11-22 18:48   ` Ville Syrjälä [this message]
2024-11-20  5:38 ` [PATCH 3/6] drm/i915/display: Replace adjusted mode with pipe mode Nemesa Garg
2024-11-22 20:01   ` Ville Syrjälä
2024-12-11  9:19     ` Garg, Nemesa
2024-11-20  5:38 ` [PATCH v5 4/6] drm/i915/display: Call panel_fitting from pipe_config Nemesa Garg
2024-11-20  5:38 ` [PATCH 5/6] drm/i915/dispaly: Allow joiner and pfit Nemesa Garg
2024-11-20  5:38 ` [PATCH 6/6] drm/i915/display: Initialize pipe_src in compute stage Nemesa Garg
2024-11-20  5:49 ` ✓ CI.Patch_applied: success for Consider joiner calculation for panel fitting Patchwork
2024-11-20  5:49 ` ✓ CI.checkpatch: " Patchwork
2024-11-20  5:51 ` ✓ CI.KUnit: " Patchwork
2024-11-20  6:09 ` ✓ CI.Build: " Patchwork
2024-11-20  6:11 ` ✓ CI.Hooks: " Patchwork
2024-11-20  6:12 ` ✗ CI.checksparse: warning " Patchwork
2024-11-20  6:13 ` ✗ Fi.CI.SPARSE: warning for Consider joiner calculation for panel fitting (rev5) Patchwork
2024-11-20  6:33 ` ✗ CI.BAT: failure for Consider joiner calculation for panel fitting Patchwork
2024-11-20  7:27 ` ✓ Fi.CI.BAT: success for Consider joiner calculation for panel fitting (rev5) Patchwork
2024-11-20 17:04 ` ✗ Xe.CI.Full: failure for Consider joiner calculation for panel fitting Patchwork
2024-11-23 13:04 ` ✗ i915.CI.Full: failure for Consider joiner calculation for panel fitting (rev5) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z0DSGC5FF0Wdbxyh@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=nemesa.garg@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.