Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings

[Andrea della Porta <andrea.porta@suse.com>]

Hi Krzysztof,

On 08:55 Wed 27 Nov     , Krzysztof Kozlowski wrote:
> On Sun, Nov 24, 2024 at 11:51:39AM +0100, Andrea della Porta wrote:
> > +  '#interrupt-cells':
> > +    description:
> > +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> > +      include/dt-bindings/interrupt-controller/irq.h.
> > +    const: 2
> > +
> > +  interrupt-controller: true
> > +
> > +patternProperties:
> > +  "-state$":
> > +    oneOf:
> > +      - $ref: "#/$defs/raspberrypi-rp1-state"
> > +      - patternProperties:
> > +          "-pins$":
> > +            $ref: "#/$defs/raspberrypi-rp1-state"
> > +        additionalProperties: false
> > +
> > +$defs:
> > +  raspberrypi-rp1-state:
> > +    allOf:
> > +      - $ref: pincfg-node.yaml#
> > +      - $ref: pinmux-node.yaml#
> > +
> > +    description:
> > +      Pin controller client devices use pin configuration subnodes (children
> > +      and grandchildren) for desired pin configuration.
> > +      Client device subnodes use below standard properties.
> > +
> > +    properties:
> > +      pins:
> > +        description:
> > +          List of gpio pins affected by the properties specified in this
> > +          subnode.
> > +        items:
> > +          pattern: "^gpio([0-9]|[1-5][0-9])$"
> 
> You have 54 GPIOs, so up to 53.

Ack.

> 
> Use also consistent quotes, either ' or ".

Ack.

> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Many thanks,
Andrea

> 
> Best regards,
> Krzysztof
>