Re: [PATCH v3 2/3] Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"

[Abel Vesa <abel.vesa@linaro.org>]

On 24-12-10 12:14:43, Johan Hovold wrote:
> This reverts commit 2dd3250191bcfe93b0c9da46624af830310400a7.
> 
> A recent change enabling OTG mode on the x1e81000 CRD breaks suspend.
> Specifically, the device hard resets during resume if suspended with all
> controllers in device mode (i.e. no USB device connected).
> 
> The corresponding change on the T14s also led to SuperSpeed hotplugs not
> being detected.
> 
> With retimer (and orientation detection) support not even merged yet,
> let's revert at least until we have stable host mode in mainline.
> 
> Fixes: 2dd3250191bc ("arm64: dts: qcom: x1e80100-crd: enable otg on usb ports")
> Reported-by: Abel Vesa <abel.vesa@linaro.org>
> Cc: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index 199f6b42aa11..66360390ae7d 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -1840,6 +1840,10 @@ &usb_1_ss0 {
>  	status = "okay";
>  };
>  
> +&usb_1_ss0_dwc3 {
> +	dr_mode = "host";
> +};
> +
>  &usb_1_ss0_dwc3_hs {
>  	remote-endpoint = <&pmic_glink_ss0_hs_in>;
>  };
> @@ -1868,6 +1872,10 @@ &usb_1_ss1 {
>  	status = "okay";
>  };
>  
> +&usb_1_ss1_dwc3 {
> +	dr_mode = "host";
> +};
> +
>  &usb_1_ss1_dwc3_hs {
>  	remote-endpoint = <&pmic_glink_ss1_hs_in>;
>  };
> @@ -1896,6 +1904,10 @@ &usb_1_ss2 {
>  	status = "okay";
>  };
>  
> +&usb_1_ss2_dwc3 {
> +	dr_mode = "host";
> +};
> +
>  &usb_1_ss2_dwc3_hs {
>  	remote-endpoint = <&pmic_glink_ss2_hs_in>;
>  };
> -- 
> 2.45.2
>