All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Manni <stefano.manni@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] imx-bbu-nand-fcb: do not use hardcoded devicefile
Date: Fri, 21 Feb 2025 18:47:23 +0100	[thread overview]
Message-ID: <Z2O1SS.LY1P1MZAEMZ02@gmail.com> (raw)
In-Reply-To: <Z7hXohthRBbG9XIf@pengutronix.de>

Hi Sasha,

sorry but I changed my workstation recently and did not restore 
send-email as on the old one. I thought the mail client geary would be 
enough but it is not.
I will send a new patch series in these days.

Best,
Stefano

On ven, feb 21 2025 at 11:38:26 +01:00:00, Sascha Hauer 
<s.hauer@pengutronix.de> wrote:
> Hi Stefano,
> 
> The patch is mangled. Could you send it using git send-email? Using a
> web endpoint for b4 would be another possibility if git send-email
> doesn't work for you.
> 
> The two patches should be sent as one to avoid intermediate breakage
> between the patches.
> 
> Regards
>   Sascha
> 
> On Thu, Feb 20, 2025 at 06:39:55PM +0100, Stefano Manni wrote:
>>  Device file was hardcoded to "nand0.barebox".
>>  This patch harmonize the signature of
>> 
>>  imx6_bbu_nand_register_handler()
>>  imx7_bbu_nand_register_handler()
>>  imx28_bbu_nand_register_handler()
>> 
>>  with the other bbu register functions in order to take
>>  the devicefile as parameter.
>> 
>>  Signed-off-by: Stefano Manni <stefano.manni@gmail.com>
>>  ---
>>  common/imx-bbu-nand-fcb.c | 23 ++++++++++++++++-------
>>  include/bbu.h | 18 ++++++++++++------
>>  2 files changed, 28 insertions(+), 13 deletions(-)
>> 
>>  diff --git a/common/imx-bbu-nand-fcb.c b/common/imx-bbu-nand-fcb.c
>>  index d0261140cf..0d17a7bf6a 100644
>>  --- a/common/imx-bbu-nand-fcb.c
>>  +++ b/common/imx-bbu-nand-fcb.c
>>  @@ -1219,6 +1219,7 @@ static int imx_bbu_nand_update(struct 
>> bbu_handler
>>  *handler, struct bbu_data *dat
>>   int used = 0;
>>   int fw_orig_len = 0;
>>   int used_refresh = 0, unused_refresh = 0;
>>  + const char *devname = handler->devicefile;
>> 
>>   if (data->image) {
>>    filetype = file_detect_type(data->image, data->len);
>>  @@ -1230,7 +1231,12 @@ static int imx_bbu_nand_update(struct 
>> bbu_handler
>>  *handler, struct bbu_data *dat
>>     return -EINVAL;
>>   }
>> 
>>  - bcb_cdev = cdev_by_name(handler->devicefile);
>>  + /* Support both boot /dev/nand0.barebox and boot nand0.barebox */
>>  + devname += str_has_prefix(devname, "/dev/");
>>  +
>>  + device_detect_by_name(devname);
>>  +
>>  + bcb_cdev = cdev_by_name(devname);
>>   if (!bcb_cdev) {
>>    pr_err("%s: No FCB device!\n", __func__);
>>    return -ENODEV;
>>  @@ -1432,7 +1438,8 @@ static void imx6_fcb_create(struct
>>  imx_nand_fcb_bbu_handler *imx_handler,
>>   fcb->MetadataBytes = 10;
>>  }
>> 
>>  -int imx6_bbu_nand_register_handler(const char *name, unsigned long 
>> flags)
>>  +int imx6_bbu_nand_register_handler(const char *name,
>>  + const char *devicefile, unsigned long flags)
>>  {
>>   struct imx_nand_fcb_bbu_handler *imx_handler;
>>   struct bbu_handler *handler;
>>  @@ -1451,7 +1458,7 @@ int imx6_bbu_nand_register_handler(const char 
>> *name,
>>  unsigned long flags)
>>   }
>> 
>>   handler = &imx_handler->handler;
>>  - handler->devicefile = "nand0.barebox";
>>  + handler->devicefile = devicefile;
>>   handler->name = name;
>>   handler->flags = flags | BBU_HANDLER_CAN_REFRESH;
>>   handler->handler = imx_bbu_nand_update;
>>  @@ -1526,7 +1533,8 @@ static void imx28_fcb_create(struct
>>  imx_nand_fcb_bbu_handler *imx_handler,
>>   fcb->EraseThreshold = readl(bch_regs + BCH_MODE);
>>  }
>> 
>>  -int imx28_bbu_nand_register_handler(const char *name, unsigned 
>> long flags)
>>  +int imx28_bbu_nand_register_handler(const char *name,
>>  + const char *devicefile, unsigned long flags)
>>  {
>>   struct imx_nand_fcb_bbu_handler *imx_handler;
>>   struct bbu_handler *handler;
>>  @@ -1540,7 +1548,7 @@ int imx28_bbu_nand_register_handler(const 
>> char *name,
>>  unsigned long flags)
>>   imx_handler->filetype = filetype_mxs_bootstream;
>> 
>>   handler = &imx_handler->handler;
>>  - handler->devicefile = "nand0.barebox";
>>  + handler->devicefile = devicefile;
>>   handler->name = name;
>>   handler->flags = flags | BBU_HANDLER_CAN_REFRESH;
>>   handler->handler = imx_bbu_nand_update;
>>  @@ -1599,7 +1607,8 @@ static int imx7_fcb_write(struct mtd_info 
>> *mtd, int
>>  block, struct fcb_block *fcb
>>   return mxs_nand_write_fcb_bch62(block, fcb, sizeof(*fcb));
>>  }
>> 
>>  -int imx7_bbu_nand_register_handler(const char *name, unsigned long 
>> flags)
>>  +int imx7_bbu_nand_register_handler(const char *name
>>  + const char *devicefile, unsigned long flags)
>>  {
>>   struct imx_nand_fcb_bbu_handler *imx_handler;
>>   struct bbu_handler *handler;
>>  @@ -1612,7 +1621,7 @@ int imx7_bbu_nand_register_handler(const char 
>> *name,
>>  unsigned long flags)
>>   imx_handler->filetype = filetype_arm_barebox;
>> 
>>   handler = &imx_handler->handler;
>>  - handler->devicefile = "nand0.barebox";
>>  + handler->devicefile = devicefile;
>>   handler->name = name;
>>   handler->flags = flags | BBU_HANDLER_CAN_REFRESH;
>>   handler->handler = imx_bbu_nand_update;
>>  diff --git a/include/bbu.h b/include/bbu.h
>>  index 5105d2ac70..087d3ee827 100644
>>  --- a/include/bbu.h
>>  +++ b/include/bbu.h
>>  @@ -98,19 +98,25 @@ static inline int 
>> bbu_mmcboot_register_handler(const
>>  char *name,
>>  #endif
>> 
>>  #if defined(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB)
>>  -int imx6_bbu_nand_register_handler(const char *name, unsigned long 
>> flags);
>>  -int imx7_bbu_nand_register_handler(const char *name, unsigned long 
>> flags);
>>  -int imx28_bbu_nand_register_handler(const char *name, unsigned 
>> long flags);
>>  +int imx6_bbu_nand_register_handler(const char *name, const char
>>  *devicefile, unsigned long flags);
>>  +int imx7_bbu_nand_register_handler(const char *name, const char
>>  *devicefile, unsigned long flags);
>>  +int imx28_bbu_nand_register_handler(const char *name, const char
>>  *devicefile, unsigned long flags);
>>  #else
>>  -static inline int imx6_bbu_nand_register_handler(const char *name, 
>> unsigned
>>  long flags)
>>  +static inline int imx6_bbu_nand_register_handler(const char *name,
>>  + const char *devicefile,
>>  + unsigned long flags)
>>  {
>>   return -ENOSYS;
>>  }
>>  -static inline int imx7_bbu_nand_register_handler(const char *name, 
>> unsigned
>>  long flags)
>>  +static inline int imx7_bbu_nand_register_handler(const char *name,
>>  + const char *devicefile,
>>  + unsigned long flags)
>>  {
>>   return -ENOSYS;
>>  }
>>  -static inline int imx28_bbu_nand_register_handler(const char *name,
>>  unsigned long flags)
>>  +static inline int imx28_bbu_nand_register_handler(const char *name,
>>  + const char *devicefile,
>>  + unsigned long flags)
>>  {
>>   return -ENOSYS;
>>  }
>>  --
>>  2.25.1
>> 
>> 
>> 
>> 
>> 
> 
> --
> Pengutronix e.K.                           |                          
>    |
> Steuerwalder Str. 21                       | 
> http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0 
>    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   
> +49-5121-206917-5555 |





  reply	other threads:[~2025-02-21 17:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-20 17:39 [PATCH 1/2] imx-bbu-nand-fcb: do not use hardcoded devicefile Stefano Manni
2025-02-21 10:38 ` Sascha Hauer
2025-02-21 17:47   ` Stefano Manni [this message]
  -- strict thread matches above, loose matches on Subject: below --
2025-02-21 18:01 Stefano Manni
2025-02-21 17:33 ` Ahmad Fatoum
2025-02-24 15:49   ` Stefano Manni
2025-03-03  8:41     ` Ahmad Fatoum
2025-03-04 17:49       ` Stefano Manni
2025-03-04 17:39         ` Ahmad Fatoum
2025-03-05 11:13 ` Sascha Hauer
2025-03-05 11:14 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z2O1SS.LY1P1MZAEMZ02@gmail.com \
    --to=stefano.manni@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.