From: Simona Vetter <simona.vetter@ffwll.ch>
To: "Christian König" <ckoenig.leichtzumerken@gmail.com>
Cc: amd-gfx@lists.freedesktop.org, alexander.deucher@amd.com, sima@ffwll.ch
Subject: Re: [PATCH] drm/amdgpu: mark a bunch of module parameters unsafe
Date: Tue, 7 Jan 2025 17:00:02 +0100 [thread overview]
Message-ID: <Z31PgleArdPbhGAw@phenom.ffwll.local> (raw)
In-Reply-To: <20250107145308.53467-1-christian.koenig@amd.com>
On Tue, Jan 07, 2025 at 03:53:08PM +0100, Christian König wrote:
> We sometimes have people trying to use debugging options in production
> environments.
>
> Mark options only meant to be used for debugging as unsafe so that the
> kernel is tainted when they are used.
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index acb9dc3705ac..9ddfdb02a6a2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -401,7 +401,7 @@ module_param_named(runpm, amdgpu_runtime_pm, int, 0444);
> * the kernel log for the list of IPs on the asic. The default is 0xffffffff (enable all blocks on a device).
> */
> MODULE_PARM_DESC(ip_block_mask, "IP Block Mask (all blocks enabled (default))");
> -module_param_named(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
> +module_param_named_unsafe(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
>
> /**
> * DOC: bapm (int)
> @@ -459,7 +459,7 @@ module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);
> * Enable experimental hw support (1 = enable). The default is 0 (disabled).
> */
> MODULE_PARM_DESC(exp_hw_support, "experimental hw support (1 = enable, 0 = disable (default))");
> -module_param_named(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
> +module_param_named_unsafe(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
>
> /**
> * DOC: dc (int)
> @@ -570,14 +570,14 @@ module_param_named(compute_multipipe, amdgpu_compute_multipipe, int, 0444);
> * Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV).
> */
> MODULE_PARM_DESC(gpu_recovery, "Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)");
> -module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
> +module_param_named_unsafe(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
>
> /**
> * DOC: emu_mode (int)
> * Set value 1 to enable emulation mode. This is only needed when running on an emulator. The default is 0 (disabled).
> */
> MODULE_PARM_DESC(emu_mode, "Emulation mode, (1 = enable, 0 = disable)");
> -module_param_named(emu_mode, amdgpu_emu_mode, int, 0444);
> +module_param_named_unsafe(emu_mode, amdgpu_emu_mode, int, 0444);
>
> /**
> * DOC: ras_enable (int)
> @@ -732,7 +732,7 @@ module_param_named(noretry, amdgpu_noretry, int, 0644);
> */
> MODULE_PARM_DESC(force_asic_type,
> "A non negative value used to specify the asic type for all supported GPUs");
> -module_param_named(force_asic_type, amdgpu_force_asic_type, int, 0444);
> +module_param_named_unsafe(force_asic_type, amdgpu_force_asic_type, int, 0444);
>
> /**
> * DOC: use_xgmi_p2p (int)
> @@ -955,7 +955,7 @@ module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
> * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
> */
> MODULE_PARM_DESC(reset_method, "GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco/bamaco)");
> -module_param_named(reset_method, amdgpu_reset_method, int, 0644);
> +module_param_named_unsafe(reset_method, amdgpu_reset_method, int, 0644);
>
> /**
> * DOC: bad_page_threshold (int) Bad page threshold is specifies the
> @@ -1051,7 +1051,7 @@ module_param_named(seamless, amdgpu_seamless, int, 0444);
> * - 0x4: Disable GPU soft recovery, always do a full reset
> */
> MODULE_PARM_DESC(debug_mask, "debug options for amdgpu, disabled by default");
> -module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444);
> +module_param_named_unsafe(debug_mask, amdgpu_debug_mask, uint, 0444);
>
> /**
> * DOC: agp (int)
> --
> 2.34.1
>
--
Simona Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2025-01-07 16:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-07 14:53 [PATCH] drm/amdgpu: mark a bunch of module parameters unsafe Christian König
2025-01-07 16:00 ` Simona Vetter [this message]
2025-01-07 22:17 ` Felix Kuehling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z31PgleArdPbhGAw@phenom.ffwll.local \
--to=simona.vetter@ffwll.ch \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=ckoenig.leichtzumerken@gmail.com \
--cc=sima@ffwll.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.