Re: [PATCH net-next 3/9] net: phy: c45: don't accept disabled EEE modes in genphy_c45_ethtool_set_eee

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Sat, Jan 11, 2025 at 02:19:04PM +0100, Heiner Kallweit wrote:
> On 11.01.2025 11:01, Russell King (Oracle) wrote:
> > On Sat, Jan 11, 2025 at 10:44:25AM +0100, Heiner Kallweit wrote:
> >> On 11.01.2025 10:21, Russell King (Oracle) wrote:
> >>> On Sat, Jan 11, 2025 at 10:06:02AM +0100, Heiner Kallweit wrote:
> >>>> Link modes in phydev->eee_disabled_modes are filtered out by
> >>>> genphy_c45_write_eee_adv() and won't be advertised. Therefore
> >>>> don't accept such modes from userspace.
> >>>
> >>> Why do we need this? Surely if the MAC doesn't support modes, then they
> >>> should be filtered out of phydev->supported_eee so that userspace knows
> >>> that the mode is not supported by the network interface as a whole, just
> >>> like we do for phydev->supported.
> >>>
> >>> That would give us the checking here.
> >>>
> >> Removing EEE modes to be disabled from supported_eee is problematic
> >> because of how genphy_c45_write_eee_adv() works.
> >>
> >> Let's say we have a 2.5Gbps PHY and want to disable EEE at 2.5Gbps. If we
> >> remove 2.5Gbps from supported_eee, then the following check is false:
> >> if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES))
> >> What would result in the 2.5Gbps mode not getting disabled.
> > 
> > Ok. Do we at least remove the broken modes from the supported mask
> > reported to userspace?
> > 
> I think that's something we could do in addition, to provide a hint to the
> user about unavailable modes. It wouldn't remove the need for the check here.
> ethtool doesn't check the advertisement against the supported modes.
> And even if it would, we must not rely on input from user space being sane.

I disagree with some of this. Userspace should expect:

- read current settings
- copy supported modes to advertised modes
- write current settings

to work. If it fails, then how does ethtool, or even the user, work out
which link modes are actually supported or not.

If we're introducing a failure on the "disabled" modes, then that is
a user-breaking change, and we need to avoid that. The current code
silently ignored the broken modes, your new code would error out on
the above action - and that's a bug.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!