All of lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp
Date: Thu, 16 Jan 2025 19:43:05 +0200	[thread overview]
Message-ID: <Z4lFKYIWMF49peim@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <20250116095416.68325-1-ankit.k.nautiyal@intel.com>

On Thu, Jan 16, 2025 at 03:24:16PM +0530, Ankit Nautiyal wrote:
> While setting the bounds for compressed bpp we ensure that the
> compressed bpp is less than the pipe bpp.
> 
> This gives an issue with 420 output format where effective link bpp is
> half that of the pipe bpp. Therefore instead of pipe bpp use link bpp to
> set the bounds for the compressed bpp.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 1ad25c37f3c2..47fcfbcb893b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2068,9 +2068,12 @@ icl_dsc_compute_link_config(struct intel_dp *intel_dp,
>  			    int timeslots)
>  {
>  	int i, ret;
> +	int link_bpp;
> +
> +	link_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp);

Here and in the xelpd version, using output_bpp instead of link_bpp or
just inlining intel_dp_output_bpp() at the single place it's used would
be better, but in any case the patch looks ok:

Reviewed-by: Imre Deak <imre.deak@intel.com>

>  
>  	/* Compressed BPP should be less than the Input DSC bpp */
> -	dsc_max_bpp = min(dsc_max_bpp, pipe_bpp - 1);
> +	dsc_max_bpp = min(dsc_max_bpp, link_bpp - 1);
>  
>  	for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp); i++) {
>  		if (valid_dsc_bpp[i] < dsc_min_bpp)
> @@ -2113,6 +2116,7 @@ xelpd_dsc_compute_link_config(struct intel_dp *intel_dp,
>  	u8 bppx16_incr = drm_dp_dsc_sink_bpp_incr(connector->dp.dsc_dpcd);
>  	u16 compressed_bppx16;
>  	u8 bppx16_step;
> +	int link_bpp;
>  	int ret;
>  
>  	if (DISPLAY_VER(display) < 14 || bppx16_incr <= 1)
> @@ -2120,8 +2124,10 @@ xelpd_dsc_compute_link_config(struct intel_dp *intel_dp,
>  	else
>  		bppx16_step = 16 / bppx16_incr;
>  
> +	link_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp);
> +
>  	/* Compressed BPP should be less than the Input DSC bpp */
> -	dsc_max_bpp = min(dsc_max_bpp << 4, (pipe_bpp << 4) - bppx16_step);
> +	dsc_max_bpp = min(dsc_max_bpp << 4, (link_bpp << 4) - bppx16_step);
>  	dsc_min_bpp = dsc_min_bpp << 4;
>  
>  	for (compressed_bppx16 = dsc_max_bpp;
> -- 
> 2.45.2
> 

  parent reply	other threads:[~2025-01-16 17:42 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-16  9:54 [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp Ankit Nautiyal
2025-01-16 10:11 ` ✓ CI.Patch_applied: success for " Patchwork
2025-01-16 10:12 ` ✓ CI.checkpatch: " Patchwork
2025-01-16 10:13 ` ✓ CI.KUnit: " Patchwork
2025-01-16 10:35 ` ✓ CI.Build: " Patchwork
2025-01-16 10:39 ` ✓ CI.Hooks: " Patchwork
2025-01-16 10:41 ` ✓ CI.checksparse: " Patchwork
2025-01-16 13:02 ` ✗ i915.CI.BAT: failure " Patchwork
2025-01-16 14:11 ` ✗ Xe.CI.Full: " Patchwork
2025-01-16 15:30 ` [PATCH] " Rodrigo Vivi
2025-01-16 16:24   ` Jani Nikula
2025-01-16 16:41     ` Rodrigo Vivi
2025-01-16 17:43 ` Imre Deak [this message]
2025-01-17  5:15   ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z4lFKYIWMF49peim@ideak-desk.fi.intel.com \
    --to=imre.deak@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.