From: Zhao Liu <zhao1.liu@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>,
"Manos Pitsidianakis" <manos.pitsidianakis@linaro.org>,
"Junjie Mao" <junjie.mao@hotmail.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, qemu-rust@nongnu.org
Subject: Re: [RFC 09/13] i386/fw_cfg: move hpet_cfg definition to hpet.c
Date: Fri, 17 Jan 2025 18:31:51 +0800 [thread overview]
Message-ID: <Z4oxlydZIK/f/aNC@intel.com> (raw)
In-Reply-To: <1da970e8-1708-48ef-87c4-1099d23e8909@redhat.com>
> This breaks if you disable HPET, which is why fw_cfg.c defines it.
>
> You can do something like
>
> diff --git a/include/hw/timer/hpet-fw-cfg.h b/include/hw/timer/hpet-fw-cfg.h
> new file mode 100644
> index 00000000000..234a49fc92e
> --- /dev/null
> +++ b/include/hw/timer/hpet-fw-cfg.h
> @@ -0,0 +1,16 @@
> +struct hpet_fw_entry
> +{
> + uint32_t event_timer_block_id;
> + uint64_t address;
> + uint16_t min_tick;
> + uint8_t page_prot;
> +} QEMU_PACKED;
> +
> +struct hpet_fw_config
> +{
> + uint8_t count;
> + struct hpet_fw_entry hpet[8];
> +} QEMU_PACKED;
> +
> +extern struct hpet_fw_config hpet_fw_cfg;
> +
> diff --git a/include/hw/timer/hpet.h b/include/hw/timer/hpet.h
> index d17a8d43199..6f7fcbc3c60 100644
> --- a/include/hw/timer/hpet.h
> +++ b/include/hw/timer/hpet.h
> @@ -60,26 +60,12 @@
> #define HPET_TN_INT_ROUTE_CAP_SHIFT 32
> #define HPET_TN_CFG_BITS_READONLY_OR_RESERVED 0xffff80b1U
> -struct hpet_fw_entry
> -{
> - uint32_t event_timer_block_id;
> - uint64_t address;
> - uint16_t min_tick;
> - uint8_t page_prot;
> -} QEMU_PACKED;
> -
> -struct hpet_fw_config
> -{
> - uint8_t count;
> - struct hpet_fw_entry hpet[8];
> -} QEMU_PACKED;
> -
> -extern struct hpet_fw_config hpet_cfg;
> -
> #define TYPE_HPET "hpet"
> #define HPET_INTCAP "hpet-intcap"
> +#include "hw/timer/hpet-fw-cfg.h"
> +
> static inline bool hpet_find(void)
> {
> return object_resolve_path_type("", TYPE_HPET, NULL);
> diff --git a/rust/wrapper.h b/rust/wrapper.h
> index 285d0eb6ad0..82381e43472 100644
> --- a/rust/wrapper.h
> +++ b/rust/wrapper.h
> @@ -62,3 +62,4 @@ typedef enum memory_order {
> #include "qapi/error.h"
> #include "migration/vmstate.h"
> #include "chardev/char-serial.h"
> +#include "hw/timer/hpet-fw-cfg.h"
>
>
> but you will have to use unsafe to access it since it's a "static mut".
>
Unfortunately, this way doesn't work either, if we disable both
CONFIG_HPET and CONFIG_X_HPET_RUST.
This is because I integrates hpet_fw_cfg into hpet lib which is compiled
under CONFIG_X_HPET_RUST along with other HPET parts.
The place broken is when hpet_fw_cfg is written into machine's fw_cfg (in
hw/i386/fw_cfg.c).
I think we can just wrap such write like:
diff --git a/hw/i386/fw_cfg.c b/hw/i386/fw_cfg.c
index 162785019b7a..3635b83620da 100644
--- a/hw/i386/fw_cfg.c
+++ b/hw/i386/fw_cfg.c
@@ -147,7 +147,14 @@ FWCfgState *fw_cfg_arch_create(MachineState *ms,
#endif
fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, 1);
- fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_fw_cfg, sizeof(hpet_fw_cfg));
+#if defined(CONFIG_HPET) || defined(CONFIG_X_HPET_RUST)
+ PCMachineState *pcms = (PCMachineState *)object_dynamic_cast(OBJECT(ms),
+ TYPE_PC_MACHINE);
+ if (pcms && pcms->hpet_enabled) {
+ fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_fw_cfg, sizeof(hpet_fw_cfg));
+ }
+#endif
+
/* allocate memory for the NUMA channel: one (64bit) word for the number
* of nodes, one word for each VCPU->node and one word for each node to
* hold the amount of memory.
---
The hpet_fw_cfg is written unconditionally since 40ac17cd, because it
concerns ACPI HPET is created unconditionally. But that fact has changed
and ACPI checks HPET device now (hw/i386/acpi-build.c):
static void acpi_get_misc_info(AcpiMiscInfo *info)
{
info->has_hpet = hpet_find();
#ifdef CONFIG_TPM
info->tpm_version = tpm_get_version(tpm_find());
#endif
}
I think this is a thorough enough solution and I can post a separate
patch.
Thanks,
Zhao
next prev parent reply other threads:[~2025-01-17 10:13 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-05 6:07 [RFC 00/13] rust: Reinvent the wheel for HPET timer in Rust Zhao Liu
2024-12-05 6:07 ` [RFC 01/13] bql: check that the BQL is not dropped within marked sections Zhao Liu
2024-12-05 6:07 ` [RFC 02/13] rust: cell: add BQL-enforcing RefCell variant Zhao Liu
2024-12-05 6:07 ` [RFC 03/13] rust/cell: add get_mut() method for BqlCell Zhao Liu
2024-12-05 15:55 ` Paolo Bonzini
2024-12-07 15:56 ` Zhao Liu
2024-12-07 19:49 ` Paolo Bonzini
2024-12-05 6:07 ` [RFC 04/13] rust: add bindings for gpio_{in|out} initialization Zhao Liu
2024-12-05 18:53 ` Paolo Bonzini
2024-12-08 16:27 ` Zhao Liu
2024-12-09 11:08 ` Paolo Bonzini
2025-01-16 3:04 ` Zhao Liu
2025-01-17 9:40 ` Paolo Bonzini
2025-01-17 11:14 ` Zhao Liu
2025-01-17 12:47 ` Paolo Bonzini
2024-12-05 6:07 ` [RFC 05/13] rust: add a bit operation binding for deposit64 Zhao Liu
2024-12-05 16:09 ` Paolo Bonzini
2024-12-07 16:01 ` Zhao Liu
2024-12-07 19:44 ` Paolo Bonzini
2024-12-05 6:07 ` [RFC 06/13] rust: add bindings for memattrs Zhao Liu
2024-12-05 18:15 ` Richard Henderson
2024-12-05 18:30 ` Paolo Bonzini
2024-12-05 23:51 ` Richard Henderson
2024-12-06 8:41 ` Zhao Liu
2024-12-06 14:07 ` Richard Henderson
2024-12-06 10:59 ` Peter Maydell
2024-12-06 14:28 ` Paolo Bonzini
2024-12-06 14:42 ` Peter Maydell
2024-12-06 19:13 ` Paolo Bonzini
2025-01-20 16:52 ` Zhao Liu
2025-01-20 17:19 ` Paolo Bonzini
2025-01-23 15:10 ` Zhao Liu
2025-01-23 15:33 ` Paolo Bonzini
2024-12-07 9:21 ` Philippe Mathieu-Daudé
2024-12-08 9:30 ` Paolo Bonzini
2024-12-08 15:51 ` Zhao Liu
2024-12-05 6:07 ` [RFC 07/13] rust: add bindings for timer Zhao Liu
2024-12-05 18:18 ` Richard Henderson
2024-12-07 17:18 ` Zhao Liu
2024-12-05 18:46 ` Paolo Bonzini
2024-12-07 16:54 ` Zhao Liu
2025-01-14 15:36 ` Zhao Liu
2025-01-14 15:42 ` Zhao Liu
2025-01-14 16:14 ` Paolo Bonzini
2025-01-15 7:09 ` Zhao Liu
2024-12-05 6:07 ` [RFC 08/13] rust/qdev: add the macro to define bit property Zhao Liu
2024-12-05 6:07 ` [RFC 09/13] i386/fw_cfg: move hpet_cfg definition to hpet.c Zhao Liu
2024-12-05 12:04 ` Philippe Mathieu-Daudé
2024-12-05 12:46 ` Zhao Liu
2024-12-05 21:17 ` Philippe Mathieu-Daudé
2024-12-05 21:19 ` Paolo Bonzini
2024-12-07 9:16 ` Philippe Mathieu-Daudé
2024-12-07 15:36 ` Zhao Liu
2024-12-05 15:30 ` Paolo Bonzini
2024-12-07 15:28 ` Zhao Liu
2025-01-17 10:31 ` Zhao Liu [this message]
2025-01-17 10:15 ` Paolo Bonzini
2024-12-05 6:07 ` [RFC 10/13] rust/timer/hpet: define hpet_fw_cfg Zhao Liu
2024-12-05 6:07 ` [RFC 11/13] rust/timer/hpet: add basic HPET timer & state Zhao Liu
2024-12-05 20:22 ` Paolo Bonzini
2024-12-05 21:20 ` Paolo Bonzini
2024-12-09 7:46 ` Zhao Liu
2024-12-09 7:26 ` Zhao Liu
2024-12-05 6:07 ` [RFC 12/13] rust/timer/hpet: add qdev APIs support Zhao Liu
2024-12-05 18:58 ` Paolo Bonzini
2024-12-07 16:05 ` Zhao Liu
2024-12-05 6:07 ` [RFC 13/13] i386: enable rust hpet for pc when rust is enabled Zhao Liu
2024-12-05 15:20 ` Paolo Bonzini
2024-12-06 9:06 ` Zhao Liu
2024-12-05 6:22 ` [RFC 00/13] rust: Reinvent the wheel for HPET timer in Rust Zhao Liu
2024-12-05 16:28 ` Paolo Bonzini
2024-12-09 7:57 ` Zhao Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z4oxlydZIK/f/aNC@intel.com \
--to=zhao1.liu@intel.com \
--cc=alex.bennee@linaro.org \
--cc=junjie.mao@hotmail.com \
--cc=manos.pitsidianakis@linaro.org \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-rust@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.