From: Baoquan He <bhe@redhat.com>
To: Coiby Xu <coxu@redhat.com>
Cc: akpm@linux-foundation.org, kexec@lists.infradead.org,
"Ondrej Kozina" <okozina@redhat.com>,
"Milan Broz" <gmazyland@gmail.com>,
"Thomas Staudt" <tstaudt@de.ibm.com>,
"Daniel P . Berrangé" <berrange@redhat.com>,
"Kairui Song" <ryncsn@gmail.com>,
"Pingfan Liu" <kernelfans@gmail.com>,
"Dave Young" <dyoung@redhat.com>,
linux-kernel@vger.kernel.org, x86@kernel.org,
"Dave Hansen" <dave.hansen@intel.com>,
"Vitaly Kuznetsov" <vkuznets@redhat.com>
Subject: Re: [PATCH v8 0/7] Support kdump with LUKS encryption by reusing LUKS volume keys
Date: Tue, 11 Feb 2025 18:25:18 +0800 [thread overview]
Message-ID: <Z6sljm1lurDKPCvj@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20250207080818.129165-1-coxu@redhat.com>
On 02/07/25 at 04:08pm, Coiby Xu wrote:
> LUKS is the standard for Linux disk encryption, widely adopted by users,
> and in some cases, such as Confidential VMs, it is a requirement. With
> kdump enabled, when the first kernel crashes, the system can boot into
> the kdump/crash kernel to dump the memory image (i.e., /proc/vmcore)
> to a specified target. However, there are two challenges when dumping
> vmcore to a LUKS-encrypted device:
>
> - Kdump kernel may not be able to decrypt the LUKS partition. For some
> machines, a system administrator may not have a chance to enter the
> password to decrypt the device in kdump initramfs after the 1st kernel
> crashes; For cloud confidential VMs, depending on the policy the
> kdump kernel may not be able to unseal the keys with TPM and the
> console virtual keyboard is untrusted.
>
> - LUKS2 by default use the memory-hard Argon2 key derivation function
> which is quite memory-consuming compared to the limited memory reserved
> for kdump. Take Fedora example, by default, only 256M is reserved for
> systems having memory between 4G-64G. With LUKS enabled, ~1300M needs
> to be reserved for kdump. Note if the memory reserved for kdump can't
> be used by 1st kernel i.e. an user sees ~1300M memory missing in the
> 1st kernel.
>
> Besides users (at least for Fedora) usually expect kdump to work out of
> the box i.e. no manual password input or custom crashkernel value is
> needed. And it doesn't make sense to derivate the keys again in kdump
> kernel which seems to be redundant work.
>
> This patch set addresses the above issues by making the LUKS volume keys
> persistent for kdump kernel with the help of cryptsetup's new APIs
> (--link-vk-to-keyring/--volume-key-keyring). Here is the life cycle of
> the kdump copies of LUKS volume keys,
>
> 1. After the 1st kernel loads the initramfs during boot, systemd
> use an user-input passphrase to de-crypt the LUKS volume keys
> or TPM-sealed key and then save the volume keys to specified keyring
> (using the --link-vk-to-keyring API) and the key will expire within
> specified time.
>
> 2. A user space tool (kdump initramfs loader like kdump-utils) create
> key items inside /sys/kernel/config/crash_dm_crypt_keys to inform
> the 1st kernel which keys are needed.
>
> 3. When the kdump initramfs is loaded by the kexec_file_load
> syscall, the 1st kernel will iterate created key items, save the
> keys to kdump reserved memory.
>
> 4. When the 1st kernel crashes and the kdump initramfs is booted, the
> kdump initramfs asks the kdump kernel to create a user key using the
> key stored in kdump reserved memory by writing yes to
> /sys/kernel/crash_dm_crypt_keys/restore. Then the LUKS encrypted
> device is unlocked with libcryptsetup's --volume-key-keyring API.
>
> 5. The system gets rebooted to the 1st kernel after dumping vmcore to
> the LUKS encrypted device is finished
>
> After libcryptsetup saving the LUKS volume keys to specified keyring,
> whoever takes this should be responsible for the safety of these copies
> of keys. The keys will be saved in the memory area exclusively reserved
> for kdump where even the 1st kernel has no direct access. And further
> more, two additional protections are added,
> - save the copy randomly in kdump reserved memory as suggested by Jan
> - clear the _PAGE_PRESENT flag of the page that stores the copy as
> suggested by Pingfan
>
> This patch set only supports x86. There will be patches to support other
> architectures once this patch set gets merged.
This v8 looks good to me, thanks for the great effort, Coiby.
Acked-by: Baoquan He <bhe@redhat.com>
next prev parent reply other threads:[~2025-02-11 10:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-07 8:08 [PATCH v8 0/7] Support kdump with LUKS encryption by reusing LUKS volume keys Coiby Xu
2025-02-07 8:08 ` [PATCH v8 1/7] kexec_file: allow to place kexec_buf randomly Coiby Xu
2025-02-07 8:08 ` [PATCH v8 2/7] crash_dump: make dm crypt keys persist for the kdump kernel Coiby Xu
2025-04-23 20:44 ` Arnaud Lefebvre
2025-04-29 9:34 ` Coiby Xu
2025-02-07 8:08 ` [PATCH v8 3/7] crash_dump: store dm crypt keys in kdump reserved memory Coiby Xu
2025-02-07 8:08 ` [PATCH v8 4/7] crash_dump: reuse saved dm crypt keys for CPU/memory hot-plugging Coiby Xu
2025-02-07 8:08 ` [PATCH v8 5/7] crash_dump: retrieve dm crypt keys in kdump kernel Coiby Xu
2025-02-07 8:08 ` [PATCH v8 6/7] x86/crash: pass dm crypt keys to " Coiby Xu
2025-04-23 20:59 ` Arnaud Lefebvre
2025-04-29 9:40 ` Coiby Xu
2025-04-30 14:48 ` Arnaud Lefebvre
2025-05-02 0:13 ` Coiby Xu
2025-02-07 8:13 ` [PATCH v8 7/7] x86/crash: make the page that stores the dm crypt keys inaccessible Coiby Xu
2025-02-11 10:25 ` Baoquan He [this message]
2025-02-12 0:43 ` [PATCH v8 0/7] Support kdump with LUKS encryption by reusing LUKS volume keys Coiby Xu
2025-02-24 1:36 ` Baoquan He
2025-03-21 6:54 ` Coiby Xu
2025-03-10 3:30 ` Baoquan He
2025-04-14 5:44 ` Baoquan He
2025-04-24 0:08 ` Arnaud Lefebvre
2025-04-28 9:02 ` Coiby Xu
2025-04-28 18:40 ` Arnaud Lefebvre
2025-04-28 23:56 ` Coiby Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z6sljm1lurDKPCvj@MiWiFi-R3L-srv \
--to=bhe@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=berrange@redhat.com \
--cc=coxu@redhat.com \
--cc=dave.hansen@intel.com \
--cc=dyoung@redhat.com \
--cc=gmazyland@gmail.com \
--cc=kernelfans@gmail.com \
--cc=kexec@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=okozina@redhat.com \
--cc=ryncsn@gmail.com \
--cc=tstaudt@de.ibm.com \
--cc=vkuznets@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.