All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boqun Feng <boqun.feng@gmail.com>
To: Oliver Sang <oliver.sang@intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>,
	Ankur Arora <ankur.a.arora@oracle.com>,
	oe-lkp@lists.linux.dev, lkp@intel.com,
	Peter Zijlstra <peterz@infradead.org>,
	Frederic Weisbecker <frederic@kernel.org>,
	rcu@vger.kernel.org
Subject: Re: [linux-next:master] [rcu]  c9b55f9da0: WARNING:at_kernel/rcu/rcutorture.c:#rcutorture_one_extend_check[rcutorture]
Date: Sun, 23 Feb 2025 19:21:25 -0800	[thread overview]
Message-ID: <Z7vltauHgdSdo7Ui@Mac.home> (raw)
In-Reply-To: <Z7vXylQt2yR6HCa6@xsang-OptiPlex-9020>

I finally find why I cannot reproduce this, I accidentally used
next.2025.02.10a to build the kernel first, which has commit
("rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool"),
which changes Kconfig RCU_TORTURE_TEST_CHK_DRD_STATE into a bool and
that disabled the test... (because config from you has it as =m).

On Mon, Feb 24, 2025 at 10:22:02AM +0800, Oliver Sang wrote:
> hi, Paul,
> 
> On Fri, Feb 21, 2025 at 05:02:51PM -0800, Paul E. McKenney wrote:
> 
> [...]
> 
> > > > 
> > > > And rcutorture's WARN_ON() has a bug that is exposed by that change
> > > > in Kconfig option.  Does the patch shown below help?
> > > 
> > > the patch does not fix the WARNING in our tests. attached one dmesg FYI.
> > 
> > Just to make sure that I understand, this patch was applied against this
> > commit, correct?
> > 
> > c9b55f9da0d2 ("rcu: limit PREEMPT_RCU configurations")
> > 
> > I am guessing this based on this dmesg line:
> > 
> >  [  109.553307][  T781] CPU: 1 UID: 0 PID: 781 Comm: rcu_torture_rea Tainted: G                T  6.14.0-rc1-00007-gc9b55f9da0d2 #1
> 
> above line is not from the dmesg I attached in last mail. it's from
> https://download.01.org/0day-ci/archive/20250217/202502171415.8ec87c87-lkp@intel.com/dmesg.xz
> which is for our original report.
> 
> > 
> > Is this really the case, or am I confused?
> 
> we applied your patch as:
> 
> 89519085afdf2 fix for c9b55f9da0 from Paul
> c9b55f9da0d2c rcu: limit PREEMPT_RCU configurations
> f001b7165def8 osnoise: provide quiescent states
> 
> so in the dmesg I attached in last mail (I attached it again in this mail):
> 
> [    0.000000][    T0] Linux version 6.14.0-rc1-00008-g89519085afdf (kbuild@9871be4fdbcc) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Fri Feb 21 00:34:02 CST 2025
> ...
> [  117.463907][  T812] CPU: 1 UID: 0 PID: 812 Comm: rcu_torture_rea Tainted: G                T  6.14.0-rc1-00008-g89519085afdf #1
> 
> the change of this 89519085afdf2 is as [1]
> 
> I'm not sure if it's better to upload dmesg for fix patch to
> https://download.01.org/0day-ci/archive/20250217/202502171415.8ec87c87-lkp@intel.com
> again, so I did not do that. sorry if this causes confusion.
> 
> not sure if this is the correct applyment? thanks
> 
> [1]
> diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
> index d26fb1d33ed9a..de85a88810cf6 100644
> --- a/kernel/rcu/rcutorture.c
> +++ b/kernel/rcu/rcutorture.c
> @@ -1873,6 +1873,8 @@ static void rcu_torture_reader_do_mbchk(long myid, struct rcu_torture *rtp,
>  #define ROEC_ARGS "%s %s: Current %#x  To add %#x  To remove %#x  preempt_count() %#x\n", __func__, s, curstate, new, old, preempt_count()
>  static void rcutorture_one_extend_check(char *s, int curstate, int new, int old, bool insoftirq)
>  {
> +       int mask;
> +
>         if (!IS_ENABLED(CONFIG_RCU_TORTURE_TEST_CHK_RDR_STATE))
>                 return;
> 
> @@ -1902,8 +1904,10 @@ static void rcutorture_one_extend_check(char *s, int curstate, int new, int old,
>         WARN_ONCE(cur_ops->extendables &&
>                   !(curstate & (RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED)) &&
>                   (preempt_count() & PREEMPT_MASK), ROEC_ARGS);
> -       WARN_ONCE(cur_ops->readlock_nesting &&
> -                 !(curstate & (RCUTORTURE_RDR_RCU_1 | RCUTORTURE_RDR_RCU_2)) &&
> +       mask = RCUTORTURE_RDR_RCU_1 | RCUTORTURE_RDR_RCU_2;
> +       if (IS_ENABLED(CONFIG_PREEMPT_RCU))

Now look into this, I think this should be:

	if (!IS_ENABLED(CONFIG_PREEMPT_RCU))

because:

*	For preemptible RCU, ->readlock_nesting() will return 
	rcu_preempt_depth()

*	For non-preemptible RCU, ->readlock_nesting() will return
	preempt count.

, which means if RCUTORTURE_RDR_PREEMPT or RCUTORTURE_RDR_SCHED is in
the curstate for *non-preemption RCU*, ->readlock_nesting() will be >0.
That is, the "mask" needs to consider _PREEMPT and _SCHED for
*non-preemption RCU*, not preemptible RCU.

Paul? Did I get it right?

Regards,
Boqun

> +               mask |= RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED;
> +       WARN_ONCE(cur_ops->readlock_nesting && !(curstate & mask) &&
>                   cur_ops->readlock_nesting() > 0, ROEC_ARGS);
>  }
> 
> 
> 
> > 
> > 							Thanx, Paul
> > 
> > > > Either way, thank you for your testing efforts!
> > > > 
> > > > 							Thanx, Paul
> > > > 
> > > > ------------------------------------------------------------------------
> > > > 
> > > > commit bb638fe1a683316397d5517cb7d1797d70d21c86
> > > > Author: Paul E. McKenney <paulmck@kernel.org>
> > > > Date:   Wed Feb 19 08:41:11 2025 -0800
> > > > 
> > > >     rcutorture: Update rcutorture_one_extend_check() for lazy preemption
> > > >     
> > > >     The rcutorture_one_extend_check() function's last check assumes that
> > > >     if cur_ops->readlock_nesting() returns greater than zero, either the
> > > >     RCUTORTURE_RDR_RCU_1 or the RCUTORTURE_RDR_RCU_2 bit must be set, that
> > > >     is, there must be at least one rcu_read_lock() in effect.
> > > >     
> > > >     This works for preemptible RCU and for non-preemptible RCU running in
> > > >     a non-preemptible kernel.  But it fails for non-preemptible RCU running
> > > >     in a preemptible kernel because then RCU's cur_ops->readlock_nesting()
> > > >     function, which is rcu_torture_readlock_nesting(), will return
> > > >     the PREEMPT_MASK mask bits from preempt_count().  The result will
> > > >     be greater than zero if preemption is disabled, including by the
> > > >     RCUTORTURE_RDR_PREEMPT and RCUTORTURE_RDR_SCHED bits.
> > > >     
> > > >     This commit therefore adjusts this check to take into account the case
> > > >     fo non-preemptible RCU running in a preemptible kernel.
> > > >     
> > > >     Reported-by: kernel test robot <oliver.sang@intel.com>
> > > >     Closes: https://lore.kernel.org/oe-lkp/202502171415.8ec87c87-lkp@intel.com
> > > >     Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
> > > >     Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> > > >     Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
> > > >     Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
> > > >     Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> > > > 
> > > > diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
> > > > index 895a27545ae1e..0f446ff04eda1 100644
> > > > --- a/kernel/rcu/rcutorture.c
> > > > +++ b/kernel/rcu/rcutorture.c
> > > > @@ -1981,6 +1981,8 @@ static void rcu_torture_reader_do_mbchk(long myid, struct rcu_torture *rtp,
> > > >  #define ROEC_ARGS "%s %s: Current %#x  To add %#x  To remove %#x  preempt_count() %#x\n", __func__, s, curstate, new, old, preempt_count()
> > > >  static void rcutorture_one_extend_check(char *s, int curstate, int new, int old, bool insoftirq)
> > > >  {
> > > > +	int mask;
> > > > +
> > > >  	if (!IS_ENABLED(CONFIG_RCU_TORTURE_TEST_CHK_RDR_STATE))
> > > >  		return;
> > > >  
> > > > @@ -2010,8 +2012,10 @@ static void rcutorture_one_extend_check(char *s, int curstate, int new, int old,
> > > >  	WARN_ONCE(cur_ops->extendables &&
> > > >  		  !(curstate & (RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED)) &&
> > > >  		  (preempt_count() & PREEMPT_MASK), ROEC_ARGS);
> > > > -	WARN_ONCE(cur_ops->readlock_nesting &&
> > > > -		  !(curstate & (RCUTORTURE_RDR_RCU_1 | RCUTORTURE_RDR_RCU_2)) &&
> > > > +	mask = RCUTORTURE_RDR_RCU_1 | RCUTORTURE_RDR_RCU_2;
> > > > +	if (IS_ENABLED(CONFIG_PREEMPT_RCU))
> > > > +		mask |= RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED;
> > > > +	WARN_ONCE(cur_ops->readlock_nesting && !(curstate & mask) &&
> > > >  		  cur_ops->readlock_nesting() > 0, ROEC_ARGS);
> > > >  }
> > > >  
> > > > 
> > 
> > 



  reply	other threads:[~2025-02-24  3:21 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-17  6:30 [linux-next:master] [rcu] c9b55f9da0: WARNING:at_kernel/rcu/rcutorture.c:#rcutorture_one_extend_check[rcutorture] kernel test robot
2025-02-19 16:51 ` Paul E. McKenney
2025-02-21  5:56   ` Boqun Feng
2025-02-21  6:59   ` Oliver Sang
2025-02-22  1:02     ` Paul E. McKenney
2025-02-24  2:22       ` Oliver Sang
2025-02-24  3:21         ` Boqun Feng [this message]
2025-02-24  4:40           ` Boqun Feng
2025-02-24  4:43             ` [PATCH v2 1/2] rcutorture: Update rcutorture_one_extend_check() for lazy preemption Boqun Feng
2025-02-24  4:43               ` [PATCH v2 2/2] rcutorture: Update ->extendables check " Boqun Feng
2025-02-24  4:49                 ` Boqun Feng
2025-02-24 17:07                 ` Paul E. McKenney
2025-02-24  4:58               ` [PATCH v2 1/2] rcutorture: Update rcutorture_one_extend_check() " Paul E. McKenney
2025-02-25  2:43                 ` Oliver Sang
2025-02-25  3:37                   ` Boqun Feng
2025-02-25  6:20                     ` Oliver Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z7vltauHgdSdo7Ui@Mac.home \
    --to=boqun.feng@gmail.com \
    --cc=ankur.a.arora@oracle.com \
    --cc=frederic@kernel.org \
    --cc=lkp@intel.com \
    --cc=oe-lkp@lists.linux.dev \
    --cc=oliver.sang@intel.com \
    --cc=paulmck@kernel.org \
    --cc=peterz@infradead.org \
    --cc=rcu@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.