Re: [PATCH 2/3] dt-bindings: net: Document GBETH bindings for Renesas RZ/V2H(P) SoC

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Sun, Mar 02, 2025 at 08:10:26PM +0100, Andrew Lunn wrote:
> > +  interrupts:
> > +    items:
> > +      - description: Subsystem interrupt
> > +      - description: The interrupt to manage the remote wake-up packet detection
> > +      - description: The interrupt that occurs when Tx/Rx enters/exits the LPI state
> > +      - description: Per-channel transmission-0 completion interrupt
> > +      - description: Per-channel transmission-1 completion interrupt
> > +      - description: Per-channel transmission-2 completion interrupt
> > +      - description: Per-channel transmission-3 completion interrupt
> > +      - description: Per-channel receive-0 completion interrupt
> > +      - description: Per-channel receive-1 completion interrupt
> > +      - description: Per-channel receive-2 completion interrupt
> > +      - description: Per-channel receive-3 completion interrupt
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: macirq
> > +      - const: eth_wake_irq
> > +      - const: eth_lpi
> > +      - const: tx0
> > +      - const: tx1
> > +      - const: tx2
> > +      - const: tx3
> > +      - const: rx0
> > +      - const: rx1
> > +      - const: rx2
> > +      - const: rx3
> 
> There has already been a discussion about trying to make the clock
> names more uniform. But what about interrupts? Which of these are in
> the IP databook? What names does the databook use for these
> interrupts?

From a quick look, I haven't found anything that suggests the above
is possible, but it clearly is... so I'll look more tomorrow.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!