From: Alice Ryhl <aliceryhl@google.com>
To: Cristian Marussi <cristian.marussi@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
linux-arm-kernel@lists.infradead.org, arm-scmi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [Bug report] Memory leak in scmi_device_create
Date: Thu, 6 Mar 2025 11:09:33 +0000 [thread overview]
Message-ID: <Z8mCbc2Z2QGd3f8M@google.com> (raw)
In-Reply-To: <Z8iFeEWq16pNQdMa@pluto>
On Wed, Mar 05, 2025 at 05:10:16PM +0000, Cristian Marussi wrote:
> On Wed, Mar 05, 2025 at 11:59:58AM +0000, Alice Ryhl wrote:
> > Dear SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE (SCPI/SCMI) Message
> > Protocol drivers maintainers,
> >
> > I flashed a v6.13-rc3 kernel onto a Rock5B board and noticed the
> > following output in my terminal:
> >
> > [ 687.694465] kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
> >
> > It seems that there is a memory leak for devices created with
> > scmi_device_create.
> >
> `
> Hi Alice,
>
> thanks for this report.
>
> > This was with a kernel running v6.13-rc3, but as far as I can tell, no
> > relevant changes have landed since v6.13-rc3. My tree *does* include
> > commit 295416091e44 ("firmware: arm_scmi: Fix slab-use-after-free in
> > scmi_bus_notifier()"). I've only seen this kmemleak report once, so it's
> > not happening consistently.
> >
> > See below for the full kmemleak report.
> >
> > Alice
> >
> > $ sudo cat /sys/kernel/debug/kmemleak
> > unreferenced object 0xffffff8106c86000 (size 2048):
> > comm "swapper/0", pid 1, jiffies 4294893094
> > hex dump (first 32 bytes):
> > 02 00 00 00 10 00 00 00 c0 01 bc 03 81 ff ff ff ................
> > 60 67 ba 03 81 ff ff ff 18 60 c8 06 81 ff ff ff `g.......`......
> > backtrace (crc feae9680):
> > [<00000000197aa008>] kmemleak_alloc+0x34/0xa0
> > [<0000000056fe02c9>] __kmalloc_cache_noprof+0x1e0/0x450
> > [<00000000a8b3dfe1>] __scmi_device_create+0xb4/0x2b4
> > [<000000008714917b>] scmi_device_create+0x40/0x194
> > [<000000001818f3cf>] scmi_chan_setup+0x144/0x3b8
> > [<00000000970bad38>] scmi_probe+0x584/0xa78
> > [<000000002600d2fd>] platform_probe+0xbc/0xf0
> > [<00000000f6f556b4>] really_probe+0x1b8/0x520
> > [<00000000eed93d59>] __driver_probe_device+0xe0/0x1d8
> > [<00000000d613b754>] driver_probe_device+0x6c/0x208
> > [<00000000187a9170>] __driver_attach+0x168/0x328
> > [<00000000e3ff1834>] bus_for_each_dev+0x14c/0x178
> > [<00000000984a3176>] driver_attach+0x34/0x44
> > [<00000000fc35bf2a>] bus_add_driver+0x1bc/0x358
> > [<00000000747fce19>] driver_register+0xc0/0x1a0
> > [<0000000081cb8754>] __platform_driver_register+0x40/0x50
> > unreferenced object 0xffffff8103bc01c0 (size 32):
>
> I could not reproduce on my setup, even though I run a system with
> all the existent SCMI protocols (and related drivers) enabled (and
> so a lot of device creations) and a downstream test driver that causes
> even more SCMI devices to be created/destroyed at load/unload.
>
> Coming down the path from scmi_chan_setup(), it seems something around
> transport devices creation, but it is not obvious to me where the leak
> could hide....
>
> ...any particular setup on your side ? ...using LKMs, loading/unloading,
> any usage pattern that could help me reproduce ?
I looked into this a bit more, and actually it does happen consistently.
It's just that kmemleak doesn't report it until 10 minutes after
booting, so I did not notice it.
As for my setup, well, I boot the kernel over pxe and the rootfs is
mounted over NFSv4. The memory leak happens even if I don't do anything
at all - I just boot and wait. The device is a Radxa Rock5B.
Not sure what other information there is to give.
I tried again with v6.14-rc5, and I still got the leak:
user@rk3588-ci:~$ sudo cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffff81068c0000 (size 2048):
comm "swapper/0", pid 1, jiffies 4294893128
hex dump (first 32 bytes):
02 00 00 00 10 00 00 00 40 a3 7a 03 81 ff ff ff ........@.z.....
60 c8 79 03 81 ff ff ff 18 00 8c 06 81 ff ff ff `.y.............
backtrace (crc 60df30fb):
kmemleak_alloc+0x34/0xa0
__kmalloc_cache_noprof+0x1e0/0x450
__scmi_device_create+0xb4/0x2b4
scmi_device_create+0x40/0x194
scmi_chan_setup+0x144/0x3b8
scmi_probe+0x51c/0x9fc
platform_probe+0xbc/0xf0
really_probe+0x1b8/0x520
__driver_probe_device+0xe0/0x1d8
driver_probe_device+0x6c/0x208
__driver_attach+0x168/0x328
bus_for_each_dev+0x14c/0x178
driver_attach+0x34/0x44
bus_add_driver+0x1bc/0x358
driver_register+0xc0/0x1a0
__platform_driver_register+0x40/0x50
unreferenced object 0xffffff81037aa340 (size 32):
comm "swapper/0", pid 1, jiffies 4294893128
hex dump (first 32 bytes):
5f 5f 73 63 6d 69 5f 74 72 61 6e 73 70 6f 72 74 __scmi_transport
5f 64 65 76 69 63 65 5f 72 78 5f 31 30 00 ff ff _device_rx_10...
backtrace (crc 8dab7ca7):
kmemleak_alloc+0x34/0xa0
__kmalloc_node_track_caller_noprof+0x234/0x528
kstrdup+0x48/0x80
kstrdup_const+0x30/0x3c
__scmi_device_create+0xd4/0x2b4
scmi_device_create+0x40/0x194
scmi_chan_setup+0x144/0x3b8
scmi_probe+0x51c/0x9fc
platform_probe+0xbc/0xf0
really_probe+0x1b8/0x520
__driver_probe_device+0xe0/0x1d8
driver_probe_device+0x6c/0x208
__driver_attach+0x168/0x328
bus_for_each_dev+0x14c/0x178
driver_attach+0x34/0x44
bus_add_driver+0x1bc/0x358
unreferenced object 0xffffff810379c860 (size 16):
comm "swapper/0", pid 1, jiffies 4294893128
hex dump (first 16 bytes):
73 63 6d 69 5f 64 65 76 2e 32 00 03 81 ff ff ff scmi_dev.2......
backtrace (crc ccc21b9a):
kmemleak_alloc+0x34/0xa0
__kmalloc_node_track_caller_noprof+0x234/0x528
kvasprintf+0x90/0x11c
kvasprintf_const+0x98/0x138
kobject_set_name_vargs+0x68/0x104
dev_set_name+0x6c/0x98
__scmi_device_create+0x17c/0x2b4
scmi_device_create+0x40/0x194
scmi_chan_setup+0x144/0x3b8
scmi_probe+0x51c/0x9fc
platform_probe+0xbc/0xf0
really_probe+0x1b8/0x520
__driver_probe_device+0xe0/0x1d8
driver_probe_device+0x6c/0x208
__driver_attach+0x168/0x328
bus_for_each_dev+0x14c/0x178
unreferenced object 0xffffff8105be7400 (size 512):
comm "swapper/0", pid 1, jiffies 4294893128
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 b4 f0 83 c0 ff ff ff ................
backtrace (crc 7b92a969):
kmemleak_alloc+0x34/0xa0
__kmalloc_cache_noprof+0x1e0/0x450
device_add+0x54/0x570
device_register+0x20/0x30
__scmi_device_create+0x184/0x2b4
scmi_device_create+0x40/0x194
scmi_chan_setup+0x144/0x3b8
scmi_probe+0x51c/0x9fc
platform_probe+0xbc/0xf0
really_probe+0x1b8/0x520
__driver_probe_device+0xe0/0x1d8
driver_probe_device+0x6c/0x208
__driver_attach+0x168/0x328
bus_for_each_dev+0x14c/0x178
driver_attach+0x34/0x44
bus_add_driver+0x1bc/0x358
next prev parent reply other threads:[~2025-03-06 11:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 11:59 [Bug report] Memory leak in scmi_device_create Alice Ryhl
2025-03-05 17:10 ` Cristian Marussi
2025-03-06 11:09 ` Alice Ryhl [this message]
2025-03-06 12:50 ` Cristian Marussi
2025-03-06 13:25 ` Alice Ryhl
2025-03-06 14:36 ` Catalin Marinas
2025-03-06 15:47 ` Cristian Marussi
2025-03-06 16:18 ` Catalin Marinas
2025-03-06 18:43 ` Cristian Marussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z8mCbc2Z2QGd3f8M@google.com \
--to=aliceryhl@google.com \
--cc=arm-scmi@vger.kernel.org \
--cc=cristian.marussi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.