Re: [PATCH RFC net-next 6/7] net: dsa: mv88e6xxx: provide software node for default settings

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Thu, Mar 23, 2023 at 07:17:27PM +0100, Andrew Lunn wrote:
> > So, given that this is only supposed to be used for mv88e6xxx because
> > of it's legacy, maybe the check in dsa_port_phylink_create() should
> > be:
> > 
> >         fwnode = of_fwnode_handle(dp->dn);
> >         if (fwnode && ds->ops->port_get_fwnode) {
> > 
> > In other words, we only allow the replacement of the firmware
> > description if one already existed.
> 
> That sounds reasonable.
> 
> > Alternatively, we could use:
> > 
> > 	if (!dsa_port_is_user(dp) && ds->ops->port_get_fwnode) {
> > 
> > since mv88e6xxx today only does this "max speed" thing for CPU and
> > DSA ports, and thus we only need to replace the firmware description
> > for these ports - and we can document that port_get_fwnode is only
> > for CPU and DSA ports.
> 
> Also reasonable.
> 
> The first seems better for the Non-DT, where as the second makes it
> clear it is supposed to be for CPU and DSA ports only.
> 
> Is it over the top to combine them?

To be clear, you're suggesting:

	if (!dsa_port_is_user(dp) && fwnode && ds->ops->port_get_fwnode) {

?

If so, yes - you know better than I how these bits are supposed to work.
Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!