Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel

[Jianhua Lu <lujianhua000@gmail.com>]

On Sat, Apr 08, 2023 at 03:04:52PM +0200, Krzysztof Kozlowski wrote:
> On 23/03/2023 01:59, Jianhua Lu wrote:
> > Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel
> > is a dual dsi mode panel and the dsi phy type is cphy.
> > 
> > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> > ---
> > Changes in v2:
> >   - Include missing <dt-bindings/phy/phy.h> for phy-type property.
> > 
> > Changes in v3:
> >   - Sort include header.
> >   - Move qcom,sync-dual-dsi to the front of qcom,master-dsi 
> >   - Add newline before subnode.
> > 
> >  .../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts |  5 ++
> >  .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 75 +++++++++++++++++++
> >  2 files changed, 80 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> > index bd9ad109daf9..8b2ae39950ff 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> > @@ -11,3 +11,8 @@ / {
> >  	model = "Xiaomi Mi Pad 5 Pro (BOE)";
> >  	compatible = "xiaomi,elish", "qcom,sm8250";
> >  };
> > +
> > +&display_panel {
> > +	compatible = "xiaomi,elish-boe-nt36523";
> 
> If you add new bindings and new nodes using these - in this case this
> panel - please test it. This is why we have DT schema, so you can verify
> your DTS. Sending DTS which is entirely different than the bindings you
> sent, is adding quite an effort for us later to fix it.

I apologize for this. I will test it before sending patches next time.
> 
> Best regards,
> Krzysztof
>