Re: [PATCH v3 4/5] iio: light: ROHM BU27008 color sensor

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Apr 26, 2023 at 11:08:17AM +0300, Matti Vaittinen wrote:
> The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
> and IR) with four configurable channels. Red and green being always
> available and two out of the rest three (blue, clear, IR) can be
> selected to be simultaneously measured. Typical application is adjusting
> LCD backlight of TVs, mobile phones and tablet PCs.
> 
> Add initial support for the ROHM BU27008 color sensor.
>  - raw_read() of RGB and clear channels
>  - triggered buffer w/ DRDY interrtupt

...

> +enum {
> +	BU27008_RED,	/* Always data0 */
> +	BU27008_GREEN,	/* Always data1 */
> +	BU27008_BLUE,	/* data2, configurable (blue / clear) */
> +	BU27008_CLEAR,	/* data2 or data3 */
> +	BU27008_IR,	/* data3 */
> +	BU27008_NUM_CHANS

Why not converting comments to a kernel-doc?

> +};
> +
> +enum {
> +	BU27008_DATA0, /* Always RED */
> +	BU27008_DATA1, /* Always GREEN */
> +	BU27008_DATA2, /* Blue or Clear */
> +	BU27008_DATA3, /* IR or Clear */
> +	BU27008_NUM_HW_CHANS
> +};

Ditto.

...

> +	if (int_time < 0)
> +		int_time = 400000;

Adding 3 0:s to drop them below with a heavy division operation? Well done!
Or did I miss anything?

> +	msleep(int_time / 1000);

USEC_PER_MSEC ?

...

> +	ret = devm_iio_device_register(dev, idev);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "Unable to register iio device\n");
> +
> +	return ret;

return 0 will suffice.

-- 
With Best Regards,
Andy Shevchenko