All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Stoakes <lstoakes@gmail.com>
To: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	"Liam R . Howlett" <Liam.Howlett@oracle.com>,
	Vlastimil Babka <vbabka@suse.cz>
Subject: Re: [PATCH] mm/mmap/vma_merge: always check invariants
Date: Wed, 10 May 2023 09:26:10 -0700	[thread overview]
Message-ID: <ZFvFoj--H21sxzCQ@murray> (raw)
In-Reply-To: <ZFvDrZRV8RnoPR69@FVFF77S0Q05N.cambridge.arm.com>

On Wed, May 10, 2023 at 05:17:49PM +0100, Mark Rutland wrote:
> On Wed, May 10, 2023 at 09:04:44AM -0700, Lorenzo Stoakes wrote:
> > On Wed, May 10, 2023 at 03:15:51PM +0100, Mark Rutland wrote:
> > > Hi,
> > >
> > > On Sun, Apr 30, 2023 at 09:19:17PM +0100, Lorenzo Stoakes wrote:
> > > > We may still have inconsistent input parameters even if we choose not to
> > > > merge and the vma_merge() invariant checks are useful for checking this
> > > > with no production runtime cost (these are only relevant when
> > > > CONFIG_DEBUG_VM is specified).
> > > >
> > > > Therefore, perform these checks regardless of whether we merge.
> > > >
> > > > This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
> > > > Correctly update prev when policy is equal on mbind") in the mbind logic
> > > > was only picked up in the 6.2.y stable branch where these assertions are
> > > > performed prior to determining mergeability.
> > > >
> > > > Had this remained the same in mainline this issue may have been picked up
> > > > faster, so moving forward let's always check them.
> > > >
> > > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
> > > > ---
> > > >  mm/mmap.c | 10 +++++-----
> > > >  1 file changed, 5 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/mm/mmap.c b/mm/mmap.c
> > > > index 5522130ae606..13678edaa22c 100644
> > > > --- a/mm/mmap.c
> > > > +++ b/mm/mmap.c
> > > > @@ -960,17 +960,17 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
> > > >  		merge_next = true;
> > > >  	}
> > > >
> > > > +	/* Verify some invariant that must be enforced by the caller. */
> > > > +	VM_WARN_ON(prev && addr <= prev->vm_start);
> > > > +	VM_WARN_ON(curr && (addr != curr->vm_start || end > curr->vm_end));
> > > > +	VM_WARN_ON(addr >= end);
> > > > +
> > >
> > > I'm seeing this fire a lot when fuzzing v6.4-rc1 on arm64 using Syzkaller.
> > >
> >
> > Thanks, from the line I suspect addr != curr->vm_start, but need to look
> > into the repro, at lsf/mm so a bit time lagged :)
>
> No problem; FWIW I can confirm your theory, the reproducer is causing:
>
> 	addr > curr->vm_start
>
> ... confirmed the the following hack, log below.

Awesome thanks for that! Just been firing up qemu to do this.

Cases 5-8 should really have addr == curr->vm_start, I wonder if it's
another case but curr is being set incorrectly, it should in theory not be
the case.

(See [1] for a visualisation of merge cases as a handy reference)

Of course userfaultfd might be the offender here and might be relying on no
merge case arising but passing dodgy parameters.

[1]:https://ljs.io/merge_cases.png

>
> | diff --git a/mm/mmap.c b/mm/mmap.c
> | index 13678edaa22c..2cdebba15719 100644
> | --- a/mm/mmap.c
> | +++ b/mm/mmap.c
> | @@ -961,9 +961,21 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
> |         }
> |
> |         /* Verify some invariant that must be enforced by the caller. */
> | -       VM_WARN_ON(prev && addr <= prev->vm_start);
> | -       VM_WARN_ON(curr && (addr != curr->vm_start || end > curr->vm_end));
> | -       VM_WARN_ON(addr >= end);
> | +       VM_WARN(prev && addr <= prev->vm_start,
> | +               "addr = 0x%016lx, prev->vm_start = 0x%016lx\n",
> | +               addr, prev->vm_start);
> | +
> | +       VM_WARN(curr && addr != curr->vm_start,
> | +               "addr = 0x%016lx, curr->vm_start = 0x%016lx\n",
> | +               addr, curr->vm_start);
> | +
> | +       VM_WARN(curr && addr > curr->vm_end,
> | +               "addr = 0x%016lx, curr->vm_end = 0x%016lx\n",
> | +               addr, curr->vm_end);
> | +
> | +       VM_WARN(addr >= end,
> | +               "addr = 0x%016lx, end = 0x%016lx\n",
> | +               addr, end);
> |
> |         if (!merge_prev && !merge_next)
> |                 return NULL; /* Not mergeable. */
>
> ... with that applied, running the reproducer results in:
>
> | addr = 0x0000ffff99dc2000, curr->vm_start = 0x0000ffff99db2000
> | WARNING: CPU: 0 PID: 163 at mm/mmap.c:968 vma_merge+0x3d4/0x1260
>
> ... i.e. addr > curr->vm_start
>
> Thanks,
> Mark.


  reply	other threads:[~2023-05-10 16:26 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-30 20:19 [PATCH] mm/mmap/vma_merge: always check invariants Lorenzo Stoakes
2023-05-02  9:51 ` Vlastimil Babka
2023-05-02 11:29 ` David Hildenbrand
2023-05-02 13:13 ` Liam R. Howlett
2023-05-02 19:15 ` Andrew Morton
2023-05-10 14:15 ` Mark Rutland
2023-05-10 16:04   ` Lorenzo Stoakes
2023-05-10 16:17     ` Mark Rutland
2023-05-10 16:26       ` Lorenzo Stoakes [this message]
2023-05-11  8:21         ` Lorenzo Stoakes
2023-05-11 18:08         ` Mike Rapoport
2023-05-12  1:22           ` Lorenzo Stoakes
2023-05-14 17:33           ` Lorenzo Stoakes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZFvFoj--H21sxzCQ@murray \
    --to=lstoakes@gmail.com \
    --cc=Liam.Howlett@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mark.rutland@arm.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.