Re: [PATCH v4] net: mdiobus: Add a function to deassert reset

[Simon Horman <simon.horman@corigine.com>]

On Thu, May 11, 2023 at 02:59:09PM +0800, Yan Wang wrote:
> It is possible to mount multiple sub-devices on the mido bus.
> The hardware power-on does not necessarily reset these devices.
> The device may be in an uncertain state, causing the device's ID
> to not be scanned.
> 
> So,before adding a reset to the scan, make sure the device is in
> normal working mode.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Link: https://lore.kernel.org/oe-kbuild-all/202305101702.4xW6vT72-lkp@intel.com/
> Signed-off-by: Yan Wang <rk.code@outlook.com>

...

> diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
> index 1183ef5e203e..9d7df6393059 100644
> --- a/drivers/net/mdio/fwnode_mdio.c
> +++ b/drivers/net/mdio/fwnode_mdio.c
> @@ -11,6 +11,7 @@
>  #include <linux/of.h>
>  #include <linux/phy.h>
>  #include <linux/pse-pd/pse.h>
> +#include <linux/gpio/consumer.h>
>  
>  MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
>  MODULE_LICENSE("GPL");
> @@ -57,6 +58,35 @@ fwnode_find_mii_timestamper(struct fwnode_handle *fwnode)
>  	return register_mii_timestamper(arg.np, arg.args[0]);
>  }
>  
> +static void fwnode_mdiobus_pre_enable_phy(struct fwnode_handle *fwnode)
> +{
> +	struct gpio_desc *reset;
> +	unsigned int reset_assert_delay;
> +	unsigned int reset_deassert_delay;

nit: Please arrange local variables for networking code in reverse xmas
     tree order - longest line to shortest.

> +
> +	reset = fwnode_gpiod_get_index(fwnode, "reset", 0, GPIOD_OUT_LOW, NULL);
> +	if (IS_ERR(reset)) {
> +		if (PTR_ERR(reset) == -EPROBE_DEFER)
> +			pr_debug("%pOFn: %s: GPIOs not yet available, retry later\n",
> +				 to_of_node(fwnode), __func__);
> +		else
> +			pr_err("%pOFn: %s: Can't get reset line property\n",
> +			       to_of_node(fwnode), __func__);
> +
> +		return;
> +	}
> +	fwnode_property_read_u32(fwnode, "reset-assert-us",
> +				 &reset_assert_delay);
> +	fwnode_property_read_u32(fwnode, "reset-deassert-us",
> +				 &reset_deassert_delay);

Does the return value of fwnode_property_read_u32() need to be
checked for errors?

> +	gpiod_set_value_cansleep(reset, 1);
> +	fsleep(reset_assert_delay);
> +	gpiod_set_value_cansleep(reset, 0);
> +	fsleep(reset_deassert_delay);
> +	/*Release phy's reset line, mdiobus_register_gpiod() need to request it*/

nit:

	/* Release phy's reset line, mdiobus_register_gpiod() needs to
	 * request it.
	 */

> +	gpiod_put(reset);
> +}
> +
>  int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
>  				       struct phy_device *phy,
>  				       struct fwnode_handle *child, u32 addr)
> @@ -119,6 +149,8 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>  	u32 phy_id;
>  	int rc;
>  
> +	fwnode_mdiobus_pre_enable_phy(child);
> +
>  	psec = fwnode_find_pse_control(child);
>  	if (IS_ERR(psec))
>  		return PTR_ERR(psec);
> -- 
> 2.17.1
> 
>