All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: greearb@candelatech.com
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH] wifi: mt76: mt7921:  Support temp sensor.
Date: Thu, 18 May 2023 22:42:03 +0200	[thread overview]
Message-ID: <ZGaNm8mMfbqdtWa0@lore-desk> (raw)
In-Reply-To: <20230518200718.1367381-1-greearb@candelatech.com>

[-- Attachment #1: Type: text/plain, Size: 4744 bytes --]

> From: Ben Greear <greearb@candelatech.com>
> 
> Allow sensors tool to read radio's temperature, example:
> 
> mt7921_phy17-pci-1800
> Adapter: PCI adapter
> temp1:        +72.0°C
> 
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
>  .../net/wireless/mediatek/mt76/mt7921/init.c  | 53 +++++++++++++++++++
>  .../net/wireless/mediatek/mt76/mt7921/mcu.c   | 17 ++++++
>  .../wireless/mediatek/mt76/mt7921/mt7921.h    |  1 +
>  3 files changed, 71 insertions(+)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> index c15ce1a19000..18f0f2dfbbcf 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> @@ -2,6 +2,9 @@
>  /* Copyright (C) 2020 MediaTek Inc. */
>  
>  #include <linux/etherdevice.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/thermal.h>
>  #include <linux/firmware.h>
>  #include "mt7921.h"
>  #include "../mt76_connac2_mac.h"
> @@ -58,6 +61,50 @@ static const struct ieee80211_iface_combination if_comb_chanctx[] = {
>  	}
>  };
>  
> +static ssize_t mt7921_thermal_temp_show(struct device *dev,
> +					struct device_attribute *attr,
> +					char *buf)
> +{
> +	struct mt7921_phy *phy = dev_get_drvdata(dev);
> +	int i = to_sensor_dev_attr(attr)->index;
> +	int temperature;
> +
> +	switch (i) {

nit: you can drop i and just use to_sensor_dev_attr(attr)->index

> +	case 0:

I think you need to wake the device up here running mt7921_mutex_acquire
before sending the mcu command.

nit: you can move temperature variable definition here.

Regards,
Lorenzo

> +		temperature = mt7921_mcu_get_temperature(phy);
> +		if (temperature < 0)
> +			return temperature;
> +		/* display in millidegree celcius */
> +		return sprintf(buf, "%u\n", temperature * 1000);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7921_thermal_temp, 0);
> +
> +static struct attribute *mt7921_hwmon_attrs[] = {
> +	&sensor_dev_attr_temp1_input.dev_attr.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(mt7921_hwmon);
> +
> +static int mt7921_thermal_init(struct mt7921_phy *phy)
> +{
> +	struct wiphy *wiphy = phy->mt76->hw->wiphy;
> +	struct device *hwmon;
> +	const char *name;
> +
> +	name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7921_%s",
> +			      wiphy_name(wiphy));
> +
> +	hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy,
> +						       mt7921_hwmon_groups);
> +	if (IS_ERR(hwmon))
> +		return PTR_ERR(hwmon);
> +
> +	return 0;
> +}
> +
>  static void
>  mt7921_regd_notifier(struct wiphy *wiphy,
>  		     struct regulatory_request *request)
> @@ -384,6 +431,12 @@ static void mt7921_init_work(struct work_struct *work)
>  		return;
>  	}
>  
> +	ret = mt7921_thermal_init(&dev->phy);
> +	if (ret) {
> +		dev_err(dev->mt76.dev, "thermal_init failed\n");
> +		return;
> +	}
> +
>  	/* we support chip reset now */
>  	dev->hw_init_done = true;
>  
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 9c4dcc0e5a7c..abeedacc28f2 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -1346,6 +1346,23 @@ int mt7921_mcu_set_clc(struct mt7921_dev *dev, u8 *alpha2,
>  	return 0;
>  }
>  
> +int mt7921_mcu_get_temperature(struct mt7921_phy *phy)
> +{
> +	struct mt7921_dev *dev = phy->dev;
> +	struct {
> +		u8 ctrl_id;
> +		u8 action;
> +		u8 band_idx;
> +		u8 rsv[5];
> +	} req = {
> +		.ctrl_id = THERMAL_SENSOR_TEMP_QUERY,
> +		.band_idx = phy->mt76->band_idx,
> +	};
> +
> +	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(THERMAL_CTRL), &req,
> +				 sizeof(req), true);
> +}
> +
>  int mt7921_mcu_set_rxfilter(struct mt7921_dev *dev, u32 fif,
>  			    u8 bit_op, u32 bit_map)
>  {
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> index 706f00df6836..85fddf99d497 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> @@ -568,6 +568,7 @@ int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif,
>  			   bool enable);
>  int mt7921_mcu_config_sniffer(struct mt7921_vif *vif,
>  			      struct ieee80211_chanctx_conf *ctx);
> +int mt7921_mcu_get_temperature(struct mt7921_phy *phy);
>  
>  int mt7921_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
>  				   enum mt76_txq_id qid, struct mt76_wcid *wcid,
> -- 
> 2.40.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2023-05-18 20:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-18 20:07 [PATCH] wifi: mt76: mt7921: Support temp sensor greearb
2023-05-18 20:42 ` Lorenzo Bianconi [this message]
2023-05-18 21:01   ` Ben Greear
2023-05-18 21:51     ` Lorenzo Bianconi
2023-05-19 14:19 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZGaNm8mMfbqdtWa0@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=greearb@candelatech.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.