Re: [PATCH v4 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers

[andy.shevchenko@gmail.com]

Tue, May 09, 2023 at 06:08:51PM +0200, Herve Codina kirjoitti:
> The Renesas X9250 integrates four digitally controlled potentiometers.
> On each potentiometer, the X9250T has a 100 kOhms total resistance and
> the X9250U has a 50 kOhms total resistance.

...

> +/*

> + *

Redundant blank line.

> + * x9250.c  --  Renesas X9250 potentiometers IIO driver

Please, no filename in the file itself. It adds an additional burden in case
the module will be renamed in the future.

> + * Copyright 2023 CS GROUP France
> + *
> + * Author: Herve Codina <herve.codina@bootlin.com>
> + */

> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/limits.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/spi/spi.h>

...

> +	return spi_write_then_read(x9250->spi, txbuf, ARRAY_SIZE(txbuf), NULL, 0);

sizeof() suffice.

...

> +	return spi_write_then_read(x9250->spi, txbuf, ARRAY_SIZE(txbuf), val, 1);

Ditto.

...

> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = x9250_read8(x9250, X9250_CMD_RD_WCR(ch), &v);
> +		if (ret)
> +			return ret;
> +		*val = v;
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1000 * x9250->cfg->kohms;
> +		*val2 = U8_MAX;
> +		return IIO_VAL_FRACTIONAL;
> +	}

> +	return -EINVAL;

Just make it part of default: case.

...

> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		*length = ARRAY_SIZE(range);
> +		*vals = range;
> +		*type = IIO_VAL_INT;
> +		return IIO_AVAIL_RANGE;
> +	}
> +
> +	return -EINVAL;

Same.

...

> +	if (val > U8_MAX || val < 0)
> +		return -EINVAL;

ERANGE ?

...

> +

Redundant blank line.

> +module_spi_driver(x9250_spi_driver);

-- 
With Best Regards,
Andy Shevchenko