From: andy.shevchenko@gmail.com
To: Astrid Rost <astrid.rost@axis.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"Lars-Peter Clausen" <lars@metafoo.de>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@axis.com,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mathieu Othacehe" <m.othacehe@gmail.com>
Subject: Re: [PATCH v5 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200
Date: Sat, 3 Jun 2023 15:15:57 +0300 [thread overview]
Message-ID: <ZHsu_T_0yBKLdcIu@surfacebook> (raw)
In-Reply-To: <20230530142405.1679146-4-astrid.rost@axis.com>
Tue, May 30, 2023 at 04:24:01PM +0200, Astrid Rost kirjoitti:
> Add illuminance integration time for vcnl4040 and vcnl4200.
> Add read/write attribute for illuminance integration time and read
> attribute for available integration times.
> Set scale and sampling rate according to the integration time.
...
> +static int vcnl4040_read_als_it(struct vcnl4000_data *data, int *val, int *val2)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + return ret;
> +
> + ret = FIELD_GET(VCNL4040_ALS_CONF_IT, ret);
> +
Redundant blank line.
> + if (ret >= data->chip_spec->num_als_it_times)
> + return -EINVAL;
> +
> + *val = (*data->chip_spec->als_it_times)[ret][0];
> + *val2 = (*data->chip_spec->als_it_times)[ret][1];
> +
> + return 0;
> +}
...
> +static ssize_t vcnl4040_write_als_it(struct vcnl4000_data *data, int val)
> +{
> + unsigned int i;
> + int ret, reg_val = -1;
> + u16 regval;
Besides confusing naming schema (two variables with only a _ difference)
unsigned int i;
u16 regval;
int ret;
> + for (i = 0; i < data->chip_spec->num_als_it_times; i++) {
> + if (val == (*data->chip_spec->als_it_times)[i][1]) {
> + reg_val = i;
Remove.
> + break;
> + }
> + }
> + if (reg_val < 0)
if (i == data->chip_spec->num_als_it_times)
> + return -EINVAL;
(1)
> + data->vcnl4200_al.sampling_rate = ktime_set(0, val * 1200);
> + data->al_scale = div_u64(mul_u32_u32(data->chip_spec->ulux_step,
> + (*data->chip_spec->als_it_times)[0][1]),
> + val);
> +
> + mutex_lock(&data->vcnl4000_lock);
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_AL_CONF);
> + if (ret < 0)
> + goto out_unlock;
> +
> + regval = (ret & ~VCNL4040_ALS_CONF_IT) |
> + FIELD_PREP(VCNL4040_ALS_CONF_IT, reg_val);
Use temporary variable for this field,
u16 als_conf;
...See (1)...
als_conf = FIELD_PREP(..., i);
> + ret = i2c_smbus_write_word_data(data->client,
> + VCNL4200_AL_CONF,
> + regval);
> +
> +out_unlock:
> + mutex_unlock(&data->vcnl4000_lock);
> + return ret;
> +}
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2023-06-03 12:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 14:23 [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 Astrid Rost
2023-05-30 14:23 ` [PATCH v5 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-06-03 12:08 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 2/7] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-06-03 12:09 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-06-03 12:15 ` andy.shevchenko [this message]
2023-05-30 14:24 ` [PATCH v5 4/7] iio: light: vcnl4000: add illuminance irq vcnl4040/4200 Astrid Rost
2023-06-03 13:46 ` andy.shevchenko
2023-06-04 11:16 ` Jonathan Cameron
2023-05-30 14:24 ` [PATCH v5 5/7] iio: light: vcnl4000: Add period for vcnl4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 7/7] iio: light: vcnl4000: Add calibration bias " Astrid Rost
2023-06-03 13:52 ` andy.shevchenko
2023-06-03 13:54 ` [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 andy.shevchenko
2023-06-04 11:20 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZHsu_T_0yBKLdcIu@surfacebook \
--to=andy.shevchenko@gmail.com \
--cc=astrid.rost@axis.com \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.othacehe@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.