From: Stephan Gerhold <stephan@gerhold.net>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Georgi Djakov <djakov@kernel.org>, Leo Yan <leo.yan@linaro.org>,
Evan Green <evgreen@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: Re: [PATCH v4 19/22] interconnect: qcom: icc-rpm: Fix bucket number
Date: Tue, 13 Jun 2023 22:06:40 +0200 [thread overview]
Message-ID: <ZIjMUAvt3vEnYtfe@gerhold.net> (raw)
In-Reply-To: <20230526-topic-smd_icc-v4-19-5ba82b6fbba2@linaro.org>
On Tue, Jun 13, 2023 at 04:03:19PM +0200, Konrad Dybcio wrote:
> SMD RPM only provides two buckets, one each for the active-only and
> active-sleep RPM contexts. Use the correct constant to allocate and
> operate on them.
>
> This will make the qcom,icc.h header no longer work with this driver,
> mostly because.. it was never meant to! The commit that introduced
> bucket support to SMD RPM was trying to shove a square into a round
> hole and it did not work out very well. That said, there are no
> active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.
>
> Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> drivers/interconnect/qcom/icc-rpm.c | 16 ++++++++--------
> drivers/interconnect/qcom/icc-rpm.h | 6 +++---
> 2 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
> index f9d0ecba5631..01e14b8ced64 100644
> --- a/drivers/interconnect/qcom/icc-rpm.c
> +++ b/drivers/interconnect/qcom/icc-rpm.c
> @@ -249,7 +249,7 @@ static void qcom_icc_pre_bw_aggregate(struct icc_node *node)
> size_t i;
>
> qn = node->data;
> - for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> + for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
> qn->sum_avg[i] = 0;
> qn->max_peak[i] = 0;
> }
> @@ -273,9 +273,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
> qn = node->data;
>
> if (!tag)
> - tag = QCOM_ICC_TAG_ALWAYS;
> + tag = RPM_ALWAYS_TAG;
>
> - for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> + for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
> if (tag & BIT(i)) {
> qn->sum_avg[i] += avg_bw;
> qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
> @@ -300,11 +300,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
> {
> struct icc_node *node;
> struct qcom_icc_node *qn;
> - u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
> + u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
> int i;
>
> /* Initialise aggregate values */
> - for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> + for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
> agg_avg[i] = 0;
> agg_peak[i] = 0;
> }
> @@ -317,7 +317,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
> */
> list_for_each_entry(node, &provider->nodes, node_list) {
> qn = node->data;
> - for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> + for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
> if (qn->channels)
> sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
> else
> @@ -328,7 +328,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
> }
>
> /* Find maximum values across all buckets */
> - for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++)
> + for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++)
> *max_agg_avg = max_t(u64, *max_agg_avg, agg_avg[i]);
> }
>
> @@ -339,7 +339,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
> struct icc_provider *provider;
> u64 sum_bw;
> u64 active_rate, sleep_rate;
> - u64 agg_avg[QCOM_ICC_NUM_BUCKETS], agg_peak[QCOM_ICC_NUM_BUCKETS];
> + u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
> u64 max_agg_avg;
> int ret;
>
> diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
> index a4588a3aebf3..fe928ab6b878 100644
> --- a/drivers/interconnect/qcom/icc-rpm.h
> +++ b/drivers/interconnect/qcom/icc-rpm.h
> @@ -10,7 +10,7 @@
> #include <linux/platform_device.h>
> #include <linux/soc/qcom/smd-rpm.h>
>
> -#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,rpm-icc.h>
>
> #define RPM_BUS_MASTER_REQ 0x73616d62
> #define RPM_BUS_SLAVE_REQ 0x766c7362
> @@ -105,8 +105,8 @@ struct qcom_icc_node {
> u16 num_links;
> u16 channels;
> u16 buswidth;
> - u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
> - u64 max_peak[QCOM_ICC_NUM_BUCKETS];
> + u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
> + u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
> int mas_rpm_id;
> int slv_rpm_id;
> struct qcom_icc_qos qos;
>
> --
> 2.41.0
>
next prev parent reply other threads:[~2023-06-13 20:06 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-13 14:03 [PATCH v4 00/22] Restructure RPM SMD ICC Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 02/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 03/22] soc: qcom: smd-rpm: Use tabs for defines Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 06/22] interconnect: qcom: icc-rpm: Introduce keep_alive Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 07/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code Konrad Dybcio
2023-06-13 20:10 ` Stephan Gerhold
2023-06-13 22:41 ` Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 09/22] interconnect: qcom: Add missing headers in icc-rpm.h Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 10/22] interconnect: qcom: Define RPM bus clocks Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 12/22] interconnect: qcom: msm8996: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 13/22] interconnect: qcom: qcs404: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 14/22] interconnect: qcom: msm8939: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 15/22] interconnect: qcom: msm8916: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 16/22] interconnect: qcom: qcm2290: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc Konrad Dybcio
2023-06-13 20:36 ` Stephan Gerhold
2023-06-13 20:39 ` Stephan Gerhold
2023-06-13 22:40 ` Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 19/22] interconnect: qcom: icc-rpm: Fix bucket number Konrad Dybcio
2023-06-13 20:06 ` Stephan Gerhold [this message]
2023-06-13 14:03 ` [PATCH v4 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZIjMUAvt3vEnYtfe@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=evgreen@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.