From: Ladislav Michl <oss-lists@triops.cz>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: linux-usb@vger.kernel.org, linux-mips@vger.kernel.org
Subject: [PATCH 08/11] usb: dwc3: Move Octeon glue code from arch/mips
Date: Mon, 19 Jun 2023 22:14:36 +0200 [thread overview]
Message-ID: <ZJC3LLpUlatnLdnv@lenoch> (raw)
In-Reply-To: <ZJC165p0Mj4jHcBh@lenoch>
From: Ladislav Michl <ladis@linux-mips.org>
Octeon DWC3 glue code now compiles on all platforms, so move
it to drivers/usb/dwc3. No functional changes.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
arch/mips/cavium-octeon/Makefile | 1 -
drivers/usb/dwc3/Kconfig | 9 +++++++++
drivers/usb/dwc3/Makefile | 1 +
.../octeon-usb.c => drivers/usb/dwc3/dwc3-octeon.c | 0
4 files changed, 10 insertions(+), 1 deletion(-)
rename arch/mips/cavium-octeon/octeon-usb.c => drivers/usb/dwc3/dwc3-octeon.c (100%)
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c02e542959a..2a5926578841 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -18,4 +18,3 @@ obj-y += crypto/
obj-$(CONFIG_MTD) += flash_setup.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o
-obj-$(CONFIG_USB) += octeon-usb.o
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index be954a9abbe0..8fc7b7ff7f16 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -168,4 +168,13 @@ config USB_DWC3_AM62
The Designware Core USB3 IP is programmed to operate in
in USB 2.0 mode only.
Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_OCTEON
+ tristate "Cavium Octeon Platforms"
+ depends on CAVIUM_OCTEON_SOC || COMPILE_TEST
+ default USB_DWC3
+ help
+ Support Cavium Octeon platforms with DesignWare Core USB3 IP.
+ Say 'Y' or 'M' here if you have one such device.
+
endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 9f66bd82b639..fe1493d4bbe5 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_IMX8MP) += dwc3-imx8mp.o
obj-$(CONFIG_USB_DWC3_XILINX) += dwc3-xilinx.o
+obj-$(CONFIG_USB_DWC3_OCTEON) += dwc3-octeon.o
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/drivers/usb/dwc3/dwc3-octeon.c
similarity index 100%
rename from arch/mips/cavium-octeon/octeon-usb.c
rename to drivers/usb/dwc3/dwc3-octeon.c
--
2.39.2
next prev parent reply other threads:[~2023-06-19 20:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-19 20:09 [PATCH 00/11] Cleanup Octeon DWC3 glue code Ladislav Michl
2023-06-19 20:11 ` [PATCH 01/11] MIPS: OCTEON: octeon-usb: add all register offsets Ladislav Michl
2023-06-19 20:11 ` [PATCH 02/11] MIPS: OCTEON: octeon-usb: use bitfields for control register Ladislav Michl
2023-06-19 20:12 ` [PATCH 03/11] MIPS: OCTEON: octeon-usb: use bitfields for host config register Ladislav Michl
2023-06-19 20:12 ` [PATCH 04/11] MIPS: OCTEON: octeon-usb: use bitfields for shim register Ladislav Michl
2023-06-19 20:13 ` [PATCH 05/11] MIPS: OCTEON: octeon-usb: move gpio config to separate function Ladislav Michl
2023-06-19 20:13 ` [PATCH 06/11] MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q Ladislav Michl
2023-06-19 20:14 ` [PATCH 07/11] MIPS: OCTEON: octeon-usb: cleanup divider calculation Ladislav Michl
2023-06-19 20:14 ` Ladislav Michl [this message]
2023-06-23 13:15 ` [PATCH 08/11] usb: dwc3: Move Octeon glue code from arch/mips Thomas Bogendoerfer
2023-06-30 22:32 ` Thinh Nguyen
2023-06-19 20:15 ` [PATCH 09/11] usb: dwc3: dwc3-octeon: Convert to glue driver Ladislav Michl
2023-06-30 23:25 ` Thinh Nguyen
2023-06-19 20:15 ` [PATCH 10/11] usb: dwc3: dwc3-octeon: Move node parsing into driver probe Ladislav Michl
2023-06-30 23:27 ` Thinh Nguyen
2023-07-02 0:13 ` Ladislav Michl
2023-07-05 22:55 ` Thinh Nguyen
2023-07-01 5:49 ` kernel test robot
2023-06-19 20:16 ` [PATCH 11/11] usb: dwc3: Add SPDX header and copyright Ladislav Michl
2023-06-22 23:01 ` [PATCH 00/11] Cleanup Octeon DWC3 glue code Thinh Nguyen
2023-06-23 7:57 ` Ladislav Michl
2023-06-23 13:14 ` Thomas Bogendoerfer
2023-06-23 23:24 ` Thinh Nguyen
2023-06-24 13:04 ` Ladislav Michl
2023-06-26 23:17 ` Thinh Nguyen
2023-06-30 10:40 ` Ladislav Michl
2023-06-30 21:45 ` Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZJC3LLpUlatnLdnv@lenoch \
--to=oss-lists@triops.cz \
--cc=Thinh.Nguyen@synopsys.com \
--cc=linux-mips@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.