From: Abel Vesa <abel.vesa@linaro.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: abelvesa@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Ye Li <ye.li@nxp.com>,
Peng Fan <peng.fan@nxp.com>, Jacky Bai <ping.bai@nxp.com>
Subject: Re: [PATCH 1/2] clk: imx: pllv4: Fix SPLL2 MULT range
Date: Tue, 25 Jul 2023 10:39:58 +0300 [thread overview]
Message-ID: <ZL98Tgpb29HLXYDr@linaro.org> (raw)
In-Reply-To: <20230625123340.4067536-1-peng.fan@oss.nxp.com>
On 23-06-25 20:33:39, Peng Fan (OSS) wrote:
> From: Ye Li <ye.li@nxp.com>
>
> The SPLL2 on iMX8ULP is different with other frac PLLs, it can
> support VCO from 650Mhz to 1Ghz. According to RM, the MULT is
> using a range from 27 to 54, not some fixed values. If using
> current PLL implementation, some clock rate can't be supported.
>
> Fix the issue by adding new type for the SPLL2 and use MULT range
> to replace MULT table
>
> Fixes: 5f0601c47c33 ("clk: imx: Update the pllv4 to support imx8ulp")
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
LGTM.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/clk/imx/clk-pllv4.c | 46 +++++++++++++++++++++++++++++--------
> drivers/clk/imx/clk.h | 1 +
> 2 files changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-pllv4.c b/drivers/clk/imx/clk-pllv4.c
> index 6e7e34571fc8..9b136c951762 100644
> --- a/drivers/clk/imx/clk-pllv4.c
> +++ b/drivers/clk/imx/clk-pllv4.c
> @@ -44,11 +44,15 @@ struct clk_pllv4 {
> u32 cfg_offset;
> u32 num_offset;
> u32 denom_offset;
> + bool use_mult_range;
> };
>
> /* Valid PLL MULT Table */
> static const int pllv4_mult_table[] = {33, 27, 22, 20, 17, 16};
>
> +/* Valid PLL MULT range, (max, min) */
> +static const int pllv4_mult_range[] = {54, 27};
> +
> #define to_clk_pllv4(__hw) container_of(__hw, struct clk_pllv4, hw)
>
> #define LOCK_TIMEOUT_US USEC_PER_MSEC
> @@ -94,17 +98,30 @@ static unsigned long clk_pllv4_recalc_rate(struct clk_hw *hw,
> static long clk_pllv4_round_rate(struct clk_hw *hw, unsigned long rate,
> unsigned long *prate)
> {
> + struct clk_pllv4 *pll = to_clk_pllv4(hw);
> unsigned long parent_rate = *prate;
> unsigned long round_rate, i;
> u32 mfn, mfd = DEFAULT_MFD;
> bool found = false;
> u64 temp64;
> -
> - for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
> - round_rate = parent_rate * pllv4_mult_table[i];
> - if (rate >= round_rate) {
> + u32 mult;
> +
> + if (pll->use_mult_range) {
> + temp64 = (u64)rate;
> + do_div(temp64, parent_rate);
> + mult = temp64;
> + if (mult >= pllv4_mult_range[1] &&
> + mult <= pllv4_mult_range[0]) {
> + round_rate = parent_rate * mult;
> found = true;
> - break;
> + }
> + } else {
> + for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
> + round_rate = parent_rate * pllv4_mult_table[i];
> + if (rate >= round_rate) {
> + found = true;
> + break;
> + }
> }
> }
>
> @@ -138,14 +155,20 @@ static long clk_pllv4_round_rate(struct clk_hw *hw, unsigned long rate,
> return round_rate + (u32)temp64;
> }
>
> -static bool clk_pllv4_is_valid_mult(unsigned int mult)
> +static bool clk_pllv4_is_valid_mult(struct clk_pllv4 *pll, unsigned int mult)
> {
> int i;
>
> /* check if mult is in valid MULT table */
> - for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
> - if (pllv4_mult_table[i] == mult)
> + if (pll->use_mult_range) {
> + if (mult >= pllv4_mult_range[1] &&
> + mult <= pllv4_mult_range[0])
> return true;
> + } else {
> + for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
> + if (pllv4_mult_table[i] == mult)
> + return true;
> + }
> }
>
> return false;
> @@ -160,7 +183,7 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
>
> mult = rate / parent_rate;
>
> - if (!clk_pllv4_is_valid_mult(mult))
> + if (!clk_pllv4_is_valid_mult(pll, mult))
> return -EINVAL;
>
> if (parent_rate <= MAX_MFD)
> @@ -227,10 +250,13 @@ struct clk_hw *imx_clk_hw_pllv4(enum imx_pllv4_type type, const char *name,
>
> pll->base = base;
>
> - if (type == IMX_PLLV4_IMX8ULP) {
> + if (type == IMX_PLLV4_IMX8ULP ||
> + type == IMX_PLLV4_IMX8ULP_1GHZ) {
> pll->cfg_offset = IMX8ULP_PLL_CFG_OFFSET;
> pll->num_offset = IMX8ULP_PLL_NUM_OFFSET;
> pll->denom_offset = IMX8ULP_PLL_DENOM_OFFSET;
> + if (type == IMX_PLLV4_IMX8ULP_1GHZ)
> + pll->use_mult_range = true;
> } else {
> pll->cfg_offset = PLL_CFG_OFFSET;
> pll->num_offset = PLL_NUM_OFFSET;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index af19d9f6aed0..adb7ad649a0d 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -45,6 +45,7 @@ enum imx_pll14xx_type {
> enum imx_pllv4_type {
> IMX_PLLV4_IMX7ULP,
> IMX_PLLV4_IMX8ULP,
> + IMX_PLLV4_IMX8ULP_1GHZ,
> };
>
> enum imx_pfdv2_type {
> --
> 2.37.1
>
next prev parent reply other threads:[~2023-07-25 7:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-25 12:33 [PATCH 1/2] clk: imx: pllv4: Fix SPLL2 MULT range Peng Fan (OSS)
2023-06-25 12:33 ` Peng Fan (OSS)
2023-06-25 12:33 ` [PATCH 2/2] clk: imx: imx8ulp: update SPLL2 type Peng Fan (OSS)
2023-06-25 12:33 ` Peng Fan (OSS)
2023-07-25 7:39 ` Abel Vesa
2023-07-20 1:12 ` [PATCH 1/2] clk: imx: pllv4: Fix SPLL2 MULT range Peng Fan
2023-07-20 1:12 ` Peng Fan
2023-07-25 7:39 ` Abel Vesa [this message]
2023-08-14 10:10 ` Abel Vesa
2023-08-14 10:10 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZL98Tgpb29HLXYDr@linaro.org \
--to=abel.vesa@linaro.org \
--cc=abelvesa@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=ping.bai@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.