[PATCH v4 5/6] usb: dwc3: dwc3-octeon: Dump control register on clock init failure

[Ladislav Michl <oss-lists@triops.cz>]

From: Ladislav Michl <ladis@linux-mips.org>

It might be interesting to know control register value in case
clock fails to enable.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 CHANGES:
 - v4: new patch

 drivers/usb/dwc3/dwc3-octeon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
index 45726b39adab..9116df7def86 100644
--- a/drivers/usb/dwc3/dwc3-octeon.c
+++ b/drivers/usb/dwc3/dwc3-octeon.c
@@ -299,8 +299,8 @@ static int dwc3_octeon_setup(struct dwc3_octeon *octeon,
 	val = dwc3_octeon_readq(uctl_ctl_reg);
 	if ((div != FIELD_GET(USBDRD_UCTL_CTL_H_CLKDIV_SEL, val)) ||
 	    (!(FIELD_GET(USBDRD_UCTL_CTL_H_CLK_EN, val)))) {
-		dev_err(dev, "dwc3 controller clock init failure.\n");
-			return -EINVAL;
+		dev_err(dev, "clock init failure (UCTL_CTL=%016llx)\n", val);
+		return -EINVAL;
 	}
 
 	/* Step 4c: Deassert the controller clock divider reset. */
-- 
2.39.2