Re: [PATCH v2 01/12] scmi: refactor the code to hide a channel from devices

[AKASHI Takahiro <takahiro.akashi@linaro.org>]

Hi Etienne,

On Thu, Aug 03, 2023 at 09:24:51AM +0000, Etienne CARRIERE wrote:
> Hello Takahiro-san,
> 
> Sorry again for this late feedback.
> Testing the series against stm32mp135f-dk board which is using SCMI resources, I see the board fails to boot.
> 
> > From: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > To: trini@konsulko.com, sjg@chromium.org
> > Cc: etienne.carriere@st.com, u-boot@lists.denx.de,
> > 	AKASHI Takahiro <takahiro.akashi@linaro.org>
> > Subject: [PATCH v2 01/12] scmi: refactor the code to hide a channel from devices
> > Date: Wed, 26 Jul 2023 17:37:57 +0900	[thread overview]
> > Message-ID: <20230726083808.140780-2-takahiro.akashi@linaro.org> (raw)
> > In-Reply-To: <20230726083808.140780-1-takahiro.akashi@linaro.org>
> > 
> > The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel
> > reference") added an explicit parameter, channel, but it seems to make
> > the code complex.
> > 
> > Hiding this parameter will allow for adding a generic (protocol-agnostic)
> > helper function, i.e. for PROTOCOL_VERSION, in a later patch.
> > 
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> >
> > ---
> > v2
> > * new patch
> > ---
> >  drivers/clk/clk_scmi.c                    | 27 ++-------
> >  drivers/firmware/scmi/scmi_agent-uclass.c | 74 ++++++++++++++++++-----
> >  drivers/power/regulator/scmi_regulator.c  | 27 +++------
> >  drivers/reset/reset-scmi.c                | 19 +-----
> >  include/scmi_agent.h                      | 15 +++--
> >  5 files changed, 86 insertions(+), 76 deletions(-)
> > 
> > diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
> > index d172fed24c9d..34a49363a51a 100644
> > --- a/drivers/clk/clk_scmi.c
> > +++ b/drivers/clk/clk_scmi.c
> > @@ -13,17 +13,8 @@
> >  #include <asm/types.h>
> >  #include <linux/clk-provider.h>
> >  
> > -/**
> > - * struct scmi_clk_priv - Private data for SCMI clocks
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_clk_priv {
> > -	struct scmi_channel *channel;
> > -};
> > -
> >  static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(dev);
> >  	struct scmi_clk_protocol_attr_out out;
> >  	struct scmi_msg msg = {
> >  		.protocol_id = SCMI_PROTOCOL_ID_CLOCK,
> > @@ -33,7 +24,7 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> >  	};
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -44,7 +35,6 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> >  
> >  static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(dev);
> >  	struct scmi_clk_attribute_in in = {
> >  		.clock_id = clkid,
> >  	};
> > @@ -59,7 +49,7 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> >  	};
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -70,7 +60,6 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> >  
> >  static int scmi_clk_gate(struct clk *clk, int enable)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> >  	struct scmi_clk_state_in in = {
> >  		.clock_id = clk->id,
> >  		.attributes = enable,
> > @@ -81,7 +70,7 @@ static int scmi_clk_gate(struct clk *clk, int enable)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(clk->dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -100,7 +89,6 @@ static int scmi_clk_disable(struct clk *clk)
> >  
> >  static ulong scmi_clk_get_rate(struct clk *clk)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> >  	struct scmi_clk_rate_get_in in = {
> >  		.clock_id = clk->id,
> >  	};
> > @@ -110,7 +98,7 @@ static ulong scmi_clk_get_rate(struct clk *clk)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(clk->dev, &msg);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -123,7 +111,6 @@ static ulong scmi_clk_get_rate(struct clk *clk)
> >  
> >  static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> >  	struct scmi_clk_rate_set_in in = {
> >  		.clock_id = clk->id,
> >  		.flags = SCMI_CLK_RATE_ROUND_CLOSEST,
> > @@ -136,7 +123,7 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(clk->dev, &msg);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -149,12 +136,11 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> >  
> >  static int scmi_clk_probe(struct udevice *dev)
> >  {
> > -	struct scmi_clk_priv *priv = dev_get_priv(dev);
> >  	struct clk *clk;
> >  	size_t num_clocks, i;
> >  	int ret;
> >  
> > -	ret = devm_scmi_of_get_channel(dev, &priv->channel);
> > +	ret = devm_scmi_of_get_channel(dev);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -205,5 +191,4 @@ U_BOOT_DRIVER(scmi_clock) = {
> >  	.id = UCLASS_CLK,
> >  	.ops = &scmi_clk_ops,
> >  	.probe = scmi_clk_probe,
> > -	.priv_auto = sizeof(struct scmi_clk_priv *),
> >  };
> > diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
> > index 02de692d66f3..39cf15c88f75 100644
> > --- a/drivers/firmware/scmi/scmi_agent-uclass.c
> > +++ b/drivers/firmware/scmi/scmi_agent-uclass.c
> > @@ -8,6 +8,7 @@
> >  #include <common.h>
> >  #include <dm.h>
> >  #include <errno.h>
> > +#include <scmi_agent.h>
> >  #include <scmi_agent-uclass.h>
> >  #include <scmi_protocols.h>
> >  #include <dm/device_compat.h>
> > @@ -129,43 +130,88 @@ static const struct scmi_agent_ops *transport_dev_ops(struct udevice *dev)
> >  	return (const struct scmi_agent_ops *)dev->driver->ops;
> >  }
> >  
> > -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> > +/**
> > + * scmi_of_get_channel() - Get SCMI channel handle
> > + *
> > + * @dev:	SCMI agent device
> > + * @channel:	Output reference to the SCMI channel upon success
> > + *
> > + * On return, @channel will be set.
> > + * Return	0 on success and a negative errno on failure
> > + */
> > +static int scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> > +{
> > +	const struct scmi_agent_ops *ops;
> > +
> > +	ops = transport_dev_ops(dev);
> > +	if (ops->of_get_channel)
> > +		return ops->of_get_channel(dev, channel);
> > +	else
> > +		return -EPROTONOSUPPORT;
> > +}
> > +
> > +int devm_scmi_of_get_channel(struct udevice *dev)
> >  {
> >  	struct udevice *parent;
> > +	struct scmi_agent_proto_priv *priv = dev_get_parent_priv(dev);
> 
> This parent lookup does not match when CONFIG_CLK_CCF is enabled. When so,
> the scmi clock device is on the clock itself but a child udevice of some
> udevice held by the common clock framework (CCF).
> Platforms from the stm32mp13 family do enable SCMI clock and CCF.

I tested my patch on sandbox, where CCF is also enabled,
and "ut dm scmi_clocks" is passed without any error.
So I'm not sure if the point you mentioned above is a root cause.

-Takahiro Akashi

> It can propose a way to go, using find_scmi_transport_device() to provide
> the agent's 1st child private data as an output argument:
> //patch-start
> -static struct udevice *find_scmi_transport_device(struct udevice *dev)
> +static struct udevice *
> +find_scmi_transport_device(struct udevice *dev,
> +                          struct scmi_agent_proto_priv **priv)
>  {
>         struct udevice *parent = dev;
> +       struct scmi_agent_proto_priv *parent_priv;
>  
>         do {
> +               parent_priv = dev_get_parent_priv(parent);
>                 parent = dev_get_parent(parent);
>         } while (parent && device_get_uclass_id(parent) != UCLASS_SCMI_AGENT);
>  
>         if (!parent)
>                 dev_err(dev, "Invalid SCMI device, agent not found\n");
> +       else if (priv)
> +               *priv = parent_priv;
>  
>         return parent;
>  }
> //end patch
> 
> Tested OK on stm32mp13 with the remaining patch series applied (minor conflics).
> 
> BR,
> etienne
> 
> 
> > +	int ret;
> >  
> >  	parent = find_scmi_transport_device(dev);
> >  	if (!parent)
> >  		return -ENODEV;
> >  
> > -	if (transport_dev_ops(parent)->of_get_channel)
> > -		return transport_dev_ops(parent)->of_get_channel(parent, channel);
> > +	ret = scmi_of_get_channel(parent, &priv->channel);
> > +	if (ret == -EPROTONOSUPPORT) {
> > +		/* Drivers without a get_channel operator don't need a channel ref */
> > +		priv->channel = NULL;
> >  
> > -	/* Drivers without a get_channel operator don't need a channel ref */
> > -	*channel = NULL;
> > +		return 0;
> > +	}
> >  
> > -	return 0;
> > +	return ret;
> >  }
> >  
> > -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > -			  struct scmi_msg *msg)
> > +/**
> > + * scmi_process_msg() - Send and process an SCMI message
> > + *
> > + * Send a message to an SCMI server.
> > + * Caller sets scmi_msg::out_msg_sz to the output message buffer size.
> > + *
> > + * @dev:	SCMI agent device
> > + * @channel:	Communication channel for the device
> > + * @msg:	Message structure reference
> > + *
> > + * On return, scmi_msg::out_msg_sz stores the response payload size.
> > + * Return:	0 on success and a negative errno on failure
> > + */
> > +static int scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > +			    struct scmi_msg *msg)
> >  {
> >  	const struct scmi_agent_ops *ops;
> > +
> > +	ops = transport_dev_ops(dev);
> > +	if (ops->process_msg)
> > +		return ops->process_msg(dev, channel, msg);
> > +	else
> > +		return -EPROTONOSUPPORT;
> > +}
> > +
> > +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg)
> > +{
> >  	struct udevice *parent;
> > +	struct scmi_agent_proto_priv *priv = dev_get_parent_priv(dev);
> >  
> >  	parent = find_scmi_transport_device(dev);
> >  	if (!parent)
> >  		return -ENODEV;
> >  
> > -	ops = transport_dev_ops(parent);
> > -
> > -	if (ops->process_msg)
> > -		return ops->process_msg(parent, channel, msg);
> > -
> > -	return -EPROTONOSUPPORT;
> > +	return scmi_process_msg(parent, priv->channel, msg);
> >  }
> >  
> >  UCLASS_DRIVER(scmi_agent) = {
> >  	.id		= UCLASS_SCMI_AGENT,
> >  	.name		= "scmi_agent",
> >  	.post_bind	= scmi_bind_protocols,
> > +	.per_device_plat_auto = sizeof(struct scmi_agent_priv),
> 
> Typo: this added line belong to patch 04/12.
> 
> Regards,
> Etienne
> 
> > +	.per_child_auto	= sizeof(struct scmi_agent_proto_priv *),
> >  };
> > diff --git a/drivers/power/regulator/scmi_regulator.c b/drivers/power/regulator/scmi_regulator.c
> > index 801148036ff6..08918b20872c 100644
> > --- a/drivers/power/regulator/scmi_regulator.c
> > +++ b/drivers/power/regulator/scmi_regulator.c
> > @@ -25,18 +25,9 @@ struct scmi_regulator_platdata {
> >  	u32 domain_id;
> >  };
> >  
> > -/**
> > - * struct scmi_regulator_priv - Private data for SCMI voltage regulator
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_regulator_priv {
> > -	struct scmi_channel *channel;
> > -};
> > -
> >  static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> >  {
> >  	struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > -	struct scmi_regulator_priv *priv = dev_get_priv(dev);
> >  	struct scmi_voltd_config_set_in in = {
> >  		.domain_id = pdata->domain_id,
> >  		.config = enable ? SCMI_VOLTD_CONFIG_ON : SCMI_VOLTD_CONFIG_OFF,
> > @@ -47,7 +38,7 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -57,7 +48,6 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> >  static int scmi_voltd_get_enable(struct udevice *dev)
> >  {
> >  	struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > -	struct scmi_regulator_priv *priv = dev_get_priv(dev);
> >  	struct scmi_voltd_config_get_in in = {
> >  		.domain_id = pdata->domain_id,
> >  	};
> > @@ -67,7 +57,7 @@ static int scmi_voltd_get_enable(struct udevice *dev)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -80,7 +70,6 @@ static int scmi_voltd_get_enable(struct udevice *dev)
> >  
> >  static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> >  {
> > -	struct scmi_regulator_priv *priv = dev_get_priv(dev);
> >  	struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> >  	struct scmi_voltd_level_set_in in = {
> >  		.domain_id = pdata->domain_id,
> > @@ -92,7 +81,7 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -101,7 +90,6 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> >  
> >  static int scmi_voltd_get_voltage_level(struct udevice *dev)
> >  {
> > -	struct scmi_regulator_priv *priv = dev_get_priv(dev);
> >  	struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> >  	struct scmi_voltd_level_get_in in = {
> >  		.domain_id = pdata->domain_id,
> > @@ -112,7 +100,7 @@ static int scmi_voltd_get_voltage_level(struct udevice *dev)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(dev, &msg);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -140,7 +128,6 @@ static int scmi_regulator_of_to_plat(struct udevice *dev)
> >  static int scmi_regulator_probe(struct udevice *dev)
> >  {
> >  	struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > -	struct scmi_regulator_priv *priv = dev_get_priv(dev);
> >  	struct scmi_voltd_attr_in in = { 0 };
> >  	struct scmi_voltd_attr_out out = { 0 };
> >  	struct scmi_msg scmi_msg = {
> > @@ -153,14 +140,14 @@ static int scmi_regulator_probe(struct udevice *dev)
> >  	};
> >  	int ret;
> >  
> > -	ret = devm_scmi_of_get_channel(dev->parent, &priv->channel);
> > +	ret = devm_scmi_of_get_channel(dev);
> >  	if (ret)
> >  		return ret;
> >  
> >  	/* Check voltage domain is known from SCMI server */
> >  	in.domain_id = pdata->domain_id;
> >  
> > -	ret = devm_scmi_process_msg(dev, priv->channel, &scmi_msg);
> > +	ret = devm_scmi_process_msg(dev, &scmi_msg);
> >  	if (ret) {
> >  		dev_err(dev, "Failed to query voltage domain %u: %d\n",
> >  			pdata->domain_id, ret);
> > @@ -184,7 +171,6 @@ U_BOOT_DRIVER(scmi_regulator) = {
> >  	.probe = scmi_regulator_probe,
> >  	.of_to_plat = scmi_regulator_of_to_plat,
> >  	.plat_auto = sizeof(struct scmi_regulator_platdata),
> > -	.priv_auto = sizeof(struct scmi_regulator_priv *),
> >  };
> >  
> >  static int scmi_regulator_bind(struct udevice *dev)
> > @@ -209,4 +195,5 @@ U_BOOT_DRIVER(scmi_voltage_domain) = {
> >  	.name = "scmi_voltage_domain",
> >  	.id = UCLASS_NOP,
> >  	.bind = scmi_regulator_bind,
> > +	.per_child_auto = sizeof(struct scmi_agent_proto_priv *),
> >  };
> > diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c
> > index 122556162ec3..b76711f0a8fb 100644
> > --- a/drivers/reset/reset-scmi.c
> > +++ b/drivers/reset/reset-scmi.c
> > @@ -13,17 +13,8 @@
> >  #include <scmi_protocols.h>
> >  #include <asm/types.h>
> >  
> > -/**
> > - * struct scmi_reset_priv - Private data for SCMI reset controller
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_reset_priv {
> > -	struct scmi_channel *channel;
> > -};
> > -
> >  static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> >  {
> > -	struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> >  	struct scmi_rd_reset_in in = {
> >  		.domain_id = rst->id,
> >  		.flags = assert_not_deassert ? SCMI_RD_RESET_FLAG_ASSERT : 0,
> > @@ -35,7 +26,7 @@ static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> >  					  in, out);
> >  	int ret;
> >  
> > -	ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(rst->dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -54,7 +45,6 @@ static int scmi_reset_deassert(struct reset_ctl *rst)
> >  
> >  static int scmi_reset_request(struct reset_ctl *rst)
> >  {
> > -	struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> >  	struct scmi_rd_attr_in in = {
> >  		.domain_id = rst->id,
> >  	};
> > @@ -68,7 +58,7 @@ static int scmi_reset_request(struct reset_ctl *rst)
> >  	 * We don't really care about the attribute, just check
> >  	 * the reset domain exists.
> >  	 */
> > -	ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> > +	ret = devm_scmi_process_msg(rst->dev, &msg);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -83,9 +73,7 @@ static const struct reset_ops scmi_reset_domain_ops = {
> >  
> >  static int scmi_reset_probe(struct udevice *dev)
> >  {
> > -	struct scmi_reset_priv *priv = dev_get_priv(dev);
> > -
> > -	return devm_scmi_of_get_channel(dev, &priv->channel);
> > +	return devm_scmi_of_get_channel(dev);
> >  }
> >  
> >  U_BOOT_DRIVER(scmi_reset_domain) = {
> > @@ -93,5 +81,4 @@ U_BOOT_DRIVER(scmi_reset_domain) = {
> >  	.id = UCLASS_RESET,
> >  	.ops = &scmi_reset_domain_ops,
> >  	.probe = scmi_reset_probe,
> > -	.priv_auto = sizeof(struct scmi_reset_priv *),
> >  };
> > diff --git a/include/scmi_agent.h b/include/scmi_agent.h
> > index ee6286366df7..577892029ff8 100644
> > --- a/include/scmi_agent.h
> > +++ b/include/scmi_agent.h
> > @@ -15,6 +15,14 @@
> >  struct udevice;
> >  struct scmi_channel;
> >  
> > +/**
> > + * struct scmi_agent_proto_priv - Private data in device for SCMI agent
> > + * @channel: Reference to the SCMI channel to use
> > + */
> > +struct scmi_agent_proto_priv {
> > +	struct scmi_channel *channel;
> > +};
> > +
> >  /*
> >   * struct scmi_msg - Context of a SCMI message sent and the response received
> >   *
> > @@ -49,10 +57,9 @@ struct scmi_msg {
> >   * devm_scmi_of_get_channel() - Get SCMI channel handle from SCMI agent DT node
> >   *
> >   * @dev:	Device requesting a channel
> > - * @channel:	Output reference to the SCMI channel upon success
> >   * @return 0 on success and a negative errno on failure
> >   */
> > -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel);
> > +int devm_scmi_of_get_channel(struct udevice *dev);
> >  
> >  /**
> >   * devm_scmi_process_msg() - Send and process an SCMI message
> > @@ -62,12 +69,10 @@ int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> >   * On return, scmi_msg::out_msg_sz stores the response payload size.
> >   *
> >   * @dev:	SCMI device
> > - * @channel:	Communication channel for the device
> >   * @msg:	Message structure reference
> >   * Return: 0 on success and a negative errno on failure
> >   */
> > -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > -			  struct scmi_msg *msg);
> > +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg);
> >  
> >  /**
> >   * scmi_to_linux_errno() - Convert an SCMI error code into a Linux errno code
> > -- 
> > 2.41.0