From: Wolfram Sang <wsa@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Rosin <peda@axentia.se>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andi Shyti <andi.shyti@kernel.org>
Subject: [PULL REQUEST] i2c-for-6.6-rc1
Date: Mon, 4 Sep 2023 13:34:43 +0200 [thread overview]
Message-ID: <ZPXA0wtQYlRZSCEw@shikoro> (raw)
[-- Attachment #1: Type: text/plain, Size: 16522 bytes --]
The following changes since commit 2ccdd1b13c591d306f0401d98dedc4bdcd02b421:
Linux 6.5-rc6 (2023-08-13 11:29:55 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.6-rc1
for you to fetch changes up to 0ab4bcf0e9471c1a3f5e4721ee486f6ed1a76bac:
i2c: at91: Use dev_err_probe() instead of dev_err() (2023-08-30 21:19:55 +0200)
----------------------------------------------------------------
I2C has mainly cleanups this time and a few driver improvements. Because
a lot of developers were on holidays (including myself) it was a good
timing to apply lots of cleanups which would normally cause merge
conflicts with other floating patches. Extra thanks go to Andi Shyti who
backed me up when I was on a four week hiatus. This is also the reason
that some patches were commited later than ideal.
----------------------------------------------------------------
Arnd Bergmann (1):
virtio: Remove PM #ifdef guards to fix i2c driver
Carlos Song (1):
i2c: imx-lpi2c: directly return ISR when detect a NACK
Dan Carpenter (1):
i2c: imx: Clean up a call to request_irq()
Harry Geyer (1):
i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
Harshit Mogalapalli (1):
i2c: qcom-cci: Fix error checking in cci_probe()
Ilpo Järvinen (3):
i2c: sis5595: Do PCI error checks on own line
i2c: nforce2: Do PCI error check on own line
I2C: ali15x3: Do PCI error checks on own line
Jinjie Ruan (1):
i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
Krzysztof Kozlowski (2):
dt-bindings: i2c: nxp,pca9541: convert to DT schema
dt-bindings: i2c: arb-gpio-challange: convert to DT schema
Liao Chang (9):
i2c: bcm2835: Use dev_err_probe in probe function
i2c: mlxbf: Use dev_err_probe in probe function
i2c: xlp9xx: Use dev_err_probe in probe function
i2c: hisi: Use dev_err_probe in probe function
i2c: qcom-cci: Use dev_err_probe in probe function
i2c: pxa: Use dev_err_probe in probe function
i2c: dln2: Use dev_err_probe in probe function
i2c: imx-lpi2c: Use dev_err_probe in probe function
i2c: synquacer: Use dev_err_probe in probe function
Michal Simek (1):
dt-bindings: i2c: cadence: Describe power-domains property
Patrick Rudolph (4):
dt-bindings: i2c: pca954x: Correct interrupt support
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
i2c: muxes: pca954x: Add MAX735x/MAX736x support
i2c: muxes: pca954x: Add regulator support
Paul Cercueil (22):
i2c: au1550: Remove #ifdef guards for PM related functions
i2c: iproc: Remove #ifdef guards for PM related functions
i2c: brcmstb: Remove #ifdef guards for PM related functions
i2c: davinci: Remove #ifdef guards for PM related functions
i2c: designware: Remove #ifdef guards for PM related functions
i2c: exynos5: Remove #ifdef guards for PM related functions
i2c: hix5hd2: Remove #ifdef guards for PM related functions
i2c: i801: Remove #ifdef guards for PM related functions
i2c: img-scb: Remove #ifdef guards for PM related functions
i2c: kempld: Convert to use regular device PM
i2c: lpc2k: Remove #ifdef guards for PM related functions
i2c: mt65xx: Remove #ifdef guards for PM related functions
i2c: nomadik: Remove #ifdef guards for PM related functions
i2c: ocores: Remove #ifdef guards for PM related functions
i2c: pnx: Remove #ifdef guards for PM related functions
i2c: pxa: Remove #ifdef guards for PM related functions
i2c: qup: Remove #ifdef guards for PM related functions
i2c: rcar: Remove #ifdef guards for PM related functions
i2c: s3c2410: Remove #ifdef guards for PM related functions
i2c: sh-mobile: Remove #ifdef guards for PM related functions
i2c: virtio: Remove #ifdef guards for PM related functions
i2c: mux: pca954x: Remove #ifdef guards for PM related functions
Rob Herring (1):
I2C: Explicitly include correct DT includes
Ruan Jinjie (3):
i2c: s3c2410: Remove redundant dev_err()
i2c: stm32: Do not check for 0 return after calling platform_get_irq()
i2c: mux: ltc4306: Remove an unnecessary ternary operator
Vadim Pasternak (2):
i2c: mlxcpld: Allow driver to run on ARM64 architecture
i2c: mlxcpld: Add support for extended transaction length
Wolfram Sang (1):
Merge remote-tracking branch 'andi/i2c/andi-for-next' into i2c/for-mergewindow
Yangtao Li (11):
i2c: at91: Use devm_platform_get_and_ioremap_resource()
i2c: iproc: Convert to devm_platform_ioremap_resource()
i2c: brcmstb: Convert to devm_platform_ioremap_resource()
i2c: mlxbf: Use devm_platform_get_and_ioremap_resource()
i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
i2c: st: Use devm_platform_get_and_ioremap_resource()
i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
i2c: pxa: Use devm_platform_get_and_ioremap_resource()
i2c: pnx: Use devm_platform_get_and_ioremap_resource()
Yann Sionneau (2):
i2c: designware: Add support for recovery when GPIO need pinctrl
i2c: at91: Use dev_err_probe() instead of dev_err()
Zhu Wang (1):
i2c: remove redundant dev_err_probe()
with much appreciated quality assurance from
----------------------------------------------------------------
Kamal Dasu (1):
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
Andi Shyti (33):
(Rev.) i2c: at91: Use dev_err_probe() instead of dev_err()
(Rev.) I2C: ali15x3: Do PCI error checks on own line
(Rev.) i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
(Rev.) i2c: designware: Add support for recovery when GPIO need pinctrl
(Rev.) i2c: nforce2: Do PCI error check on own line
(Rev.) i2c: sis5595: Do PCI error checks on own line
(Rev.) i2c: qcom-cci: Fix error checking in cci_probe()
(Rev.) i2c: muxes: pca954x: Add regulator support
(Rev.) i2c: muxes: pca954x: Add MAX735x/MAX736x support
(Rev.) i2c: pnx: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: pxa: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: st: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: mlxbf: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: iproc: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: at91: Use devm_platform_get_and_ioremap_resource()
(Rev.) I2C: Explicitly include correct DT includes
(Rev.) i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
(Rev.) i2c: synquacer: Use dev_err_probe in probe function
(Rev.) i2c: imx-lpi2c: Use dev_err_probe in probe function
(Rev.) i2c: dln2: Use dev_err_probe in probe function
(Rev.) i2c: pxa: Use dev_err_probe in probe function
(Rev.) i2c: qcom-cci: Use dev_err_probe in probe function
(Rev.) i2c: xlp9xx: Use dev_err_probe in probe function
(Rev.) i2c: mlxbf: Use dev_err_probe in probe function
(Rev.) i2c: stm32: Do not check for 0 return after calling platform_get_irq()
(Rev.) virtio: Remove PM #ifdef guards to fix i2c driver
(Rev.) i2c: s3c2410: Remove redundant dev_err()
(Rev.) i2c: imx-lpi2c: directly return ISR when detect a NACK
Andy Shevchenko (2):
(Rev.) i2c: designware: Add support for recovery when GPIO need pinctrl
(Rev.) i2c: designware: Remove #ifdef guards for PM related functions
Bartosz Golaszewski (1):
(Rev.) i2c: davinci: Remove #ifdef guards for PM related functions
Bryan O'Donoghue (1):
(Rev.) i2c: qcom-cci: Fix error checking in cci_probe()
Conor Dooley (2):
(Rev.) dt-bindings: i2c: nxp,pca9541: convert to DT schema
(Rev.) i2c: remove redundant dev_err_probe()
Florian Fainelli (4):
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: bcm2835: Use dev_err_probe in probe function
(Rev.) i2c: brcmstb: Remove #ifdef guards for PM related functions
(Rev.) i2c: iproc: Remove #ifdef guards for PM related functions
Geert Uytterhoeven (3):
(Rev.) i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: sh-mobile: Remove #ifdef guards for PM related functions
(Rev.) i2c: rcar: Remove #ifdef guards for PM related functions
Jonathan Cameron (20):
(Rev.) i2c: mux: pca954x: Remove #ifdef guards for PM related functions
(Rev.) i2c: virtio: Remove #ifdef guards for PM related functions
(Rev.) i2c: sh-mobile: Remove #ifdef guards for PM related functions
(Rev.) i2c: s3c2410: Remove #ifdef guards for PM related functions
(Rev.) i2c: rcar: Remove #ifdef guards for PM related functions
(Rev.) i2c: qup: Remove #ifdef guards for PM related functions
(Rev.) i2c: pxa: Remove #ifdef guards for PM related functions
(Rev.) i2c: pnx: Remove #ifdef guards for PM related functions
(Rev.) i2c: ocores: Remove #ifdef guards for PM related functions
(Rev.) i2c: nomadik: Remove #ifdef guards for PM related functions
(Rev.) i2c: mt65xx: Remove #ifdef guards for PM related functions
(Rev.) i2c: lpc2k: Remove #ifdef guards for PM related functions
(Rev.) i2c: i801: Remove #ifdef guards for PM related functions
(Rev.) i2c: hix5hd2: Remove #ifdef guards for PM related functions
(Rev.) i2c: exynos5: Remove #ifdef guards for PM related functions
(Rev.) i2c: designware: Remove #ifdef guards for PM related functions
(Rev.) i2c: davinci: Remove #ifdef guards for PM related functions
(Rev.) i2c: brcmstb: Remove #ifdef guards for PM related functions
(Rev.) i2c: iproc: Remove #ifdef guards for PM related functions
(Rev.) i2c: au1550: Remove #ifdef guards for PM related functions
Krzysztof Kozlowski (2):
(Rev.) dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
(Rev.) dt-bindings: i2c: pca954x: Correct interrupt support
Linus Walleij (2):
(Rev.) i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
(Rev.) i2c: nomadik: Remove #ifdef guards for PM related functions
Michael Shych (2):
(Rev.) i2c: mlxcpld: Add support for extended transaction length
(Rev.) i2c: mlxcpld: Allow driver to run on ARM64 architecture
Paul Cercueil (1):
(Rev.) virtio: Remove PM #ifdef guards to fix i2c driver
Uwe Kleine-König (1):
(Rev.) i2c: imx: Clean up a call to request_irq()
Yicong Yang (1):
(Rev.) i2c: hisi: Use dev_err_probe in probe function
.../devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 3 +
.../bindings/i2c/i2c-arb-gpio-challenge.txt | 82 -------------
.../bindings/i2c/i2c-arb-gpio-challenge.yaml | 135 +++++++++++++++++++++
Documentation/devicetree/bindings/i2c/i2c-arb.txt | 35 ------
.../devicetree/bindings/i2c/i2c-mux-pca954x.yaml | 46 ++++++-
.../devicetree/bindings/i2c/nxp,pca9541.txt | 29 -----
.../devicetree/bindings/i2c/nxp,pca9541.yaml | 56 +++++++++
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-ali15x3.c | 11 +-
drivers/i2c/busses/i2c-at91-core.c | 18 +--
drivers/i2c/busses/i2c-at91-master.c | 7 +-
drivers/i2c/busses/i2c-au1550.c | 15 +--
drivers/i2c/busses/i2c-bcm-iproc.c | 20 +--
drivers/i2c/busses/i2c-bcm2835.c | 16 ++-
drivers/i2c/busses/i2c-brcmstb.c | 27 ++---
drivers/i2c/busses/i2c-cpm.c | 4 +-
drivers/i2c/busses/i2c-davinci.c | 16 +--
drivers/i2c/busses/i2c-designware-master.c | 12 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 22 +---
drivers/i2c/busses/i2c-dln2.c | 6 +-
drivers/i2c/busses/i2c-emev2.c | 2 +-
drivers/i2c/busses/i2c-exynos5.c | 12 +-
drivers/i2c/busses/i2c-gxp.c | 3 +-
drivers/i2c/busses/i2c-hisi.c | 12 +-
drivers/i2c/busses/i2c-hix5hd2.c | 10 +-
drivers/i2c/busses/i2c-i801.c | 6 +-
drivers/i2c/busses/i2c-ibm_iic.c | 3 +-
drivers/i2c/busses/i2c-img-scb.c | 10 +-
drivers/i2c/busses/i2c-imx-lpi2c.c | 23 ++--
drivers/i2c/busses/i2c-imx.c | 10 +-
drivers/i2c/busses/i2c-jz4780.c | 2 +-
drivers/i2c/busses/i2c-kempld.c | 19 ++-
drivers/i2c/busses/i2c-lpc2k.c | 9 +-
drivers/i2c/busses/i2c-meson.c | 1 -
drivers/i2c/busses/i2c-microchip-corei2c.c | 5 +-
drivers/i2c/busses/i2c-mlxbf.c | 60 +++------
drivers/i2c/busses/i2c-mlxcpld.c | 10 ++
drivers/i2c/busses/i2c-mpc.c | 3 +-
drivers/i2c/busses/i2c-mt65xx.c | 12 +-
drivers/i2c/busses/i2c-mt7621.c | 3 +-
drivers/i2c/busses/i2c-mxs.c | 1 -
drivers/i2c/busses/i2c-nforce2.c | 4 +-
drivers/i2c/busses/i2c-nomadik.c | 12 +-
drivers/i2c/busses/i2c-npcm7xx.c | 1 -
drivers/i2c/busses/i2c-ocores.c | 10 +-
drivers/i2c/busses/i2c-owl.c | 3 +-
drivers/i2c/busses/i2c-pca-platform.c | 1 -
drivers/i2c/busses/i2c-pnx.c | 15 +--
drivers/i2c/busses/i2c-pxa-pci.c | 1 -
drivers/i2c/busses/i2c-pxa.c | 20 +--
drivers/i2c/busses/i2c-qcom-cci.c | 8 +-
drivers/i2c/busses/i2c-qcom-geni.c | 4 +-
drivers/i2c/busses/i2c-qup.c | 16 +--
drivers/i2c/busses/i2c-rcar.c | 12 +-
drivers/i2c/busses/i2c-riic.c | 1 -
drivers/i2c/busses/i2c-s3c2410.c | 20 +--
drivers/i2c/busses/i2c-sh_mobile.c | 22 +---
drivers/i2c/busses/i2c-sis5595.c | 20 +--
drivers/i2c/busses/i2c-sprd.c | 1 -
drivers/i2c/busses/i2c-st.c | 3 +-
drivers/i2c/busses/i2c-stm32f4.c | 3 +-
drivers/i2c/busses/i2c-stm32f7.c | 8 +-
drivers/i2c/busses/i2c-synquacer.c | 28 ++---
drivers/i2c/busses/i2c-tegra-bpmp.c | 2 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
drivers/i2c/busses/i2c-tiny-usb.c | 4 +
drivers/i2c/busses/i2c-virtio.c | 8 +-
drivers/i2c/busses/i2c-xlp9xx.c | 6 +-
drivers/i2c/muxes/Kconfig | 6 +-
drivers/i2c/muxes/i2c-mux-gpmux.c | 2 +-
drivers/i2c/muxes/i2c-mux-ltc4306.c | 3 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 101 +++++++++++++--
include/linux/virtio.h | 2 -
73 files changed, 562 insertions(+), 565 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb.txt
delete mode 100644 Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
create mode 100644 Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2023-09-04 11:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-04 11:34 Wolfram Sang [this message]
2023-09-04 21:13 ` [PULL REQUEST] i2c-for-6.6-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZPXA0wtQYlRZSCEw@shikoro \
--to=wsa@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.