From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH printk v4 5/8] printk: nbcon: Add ownership state functions
Date: Thu, 14 Sep 2023 17:38:48 +0200 [thread overview]
Message-ID: <ZQMpCDKsfElXIXI7@alley> (raw)
In-Reply-To: <20230908185008.468566-6-john.ogness@linutronix.de>
On Fri 2023-09-08 20:56:05, John Ogness wrote:
> From: Thomas Gleixner <tglx@linutronix.de>
>
> Provide functions that are related to the safe handover mechanism
> and allow console drivers to dynamically specify unsafe regions:
>
> - nbcon_context_can_proceed()
>
> Invoked by a console owner to check whether a handover request
> is pending or whether the console has been taken over by another
> context. If a handover request is pending, this function will
> also perform the handover, thus cancelling its own ownership.
>
> - nbcon_context_enter_unsafe()/nbcon_context_exit_unsafe()
>
> Invoked by a console owner to denote that the driver is about
> to enter or leave a critical region where a take over is unsafe.
> These functions are also cancellation points where loss of
> ownership can occur.
The last sentence is not completely clear to me. I would write:
The exit variant is the point where the current owner releases
the lock for a higher priority context which asked for
the friendly handover.
> The unsafe state is stored in the console state and allows a
> new context to make informed decisions whether to attempt a
> takeover of such a console. The unsafe state is also available
> to the driver so that it can make informed decisions about the
> required actions and possibly take a special emergency path.
>
> --- a/kernel/printk/nbcon.c
> +++ b/kernel/printk/nbcon.c
> @@ -492,6 +491,115 @@ static void nbcon_context_release(struct nbcon_context *ctxt)
> ctxt->pbufs = NULL;
> }
>
> +/**
> + * nbcon_context_can_proceed - Check whether ownership can proceed
> + * @ctxt: The nbcon context from nbcon_context_try_acquire()
> + * @cur: The current console state
> + *
> + * Return: True if this context still owns the console. False if
> + * ownership was handed over or taken.
> + *
> + * Must be invoked after the record was dumped into the assigned buffer
> + * and at appropriate safe places in the driver.
I think that is not longer called explicitly in nbcon_emit_next_record().
I would write something like:
* Must be invoked when entering the unsafe state to make sure that it still
* owns the lock. Also must be invoked when exiting the unsafe context
* to eventually free the lock for a higher priority context which asked
* for the friendly handover.
*
* It can be called inside an unsafe section when the console is just
* temporary in safe state instead of exiting and entering the unsafe
* state.
*
* Also it can be called in the safe context before doing an expensive
* safe operation. It does not make sense to do the operation when
* a higher priority context took the lock.
> + *
> + * When this function returns false then the calling context no longer owns
> + * the console and is no longer allowed to go forward. In this case it must
> + * back out immediately and carefully. The buffer content is also no longer
> + * trusted since it no longer belongs to the calling context.
> + */
> +static bool nbcon_context_can_proceed(struct nbcon_context *ctxt, struct nbcon_state *cur)
> +{
> + unsigned int cpu = smp_processor_id();
With the proposed changes:
Reviewed-by: Petr Mladek <pmladek@suse.com>
Best Regards,
Petr
next prev parent reply other threads:[~2023-09-14 15:38 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-08 18:50 [PATCH printk v4 0/8] provide nbcon base John Ogness
2023-09-08 18:50 ` [PATCH printk v4 1/8] printk: Add non-BKL (nbcon) console basic infrastructure John Ogness
2023-09-08 18:50 ` [PATCH printk v4 2/8] printk: nbcon: Add acquire/release logic John Ogness
2023-09-14 13:16 ` Petr Mladek
2023-09-14 13:23 ` [PATCH v4 2+/8] " Petr Mladek
2023-09-15 17:01 ` John Ogness
2023-09-08 18:50 ` [PATCH printk v4 3/8] printk: Make static printk buffers available to nbcon John Ogness
2023-09-14 13:29 ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 4/8] printk: nbcon: Add buffer management John Ogness
2023-09-14 14:55 ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 5/8] printk: nbcon: Add ownership state functions John Ogness
2023-09-14 15:38 ` Petr Mladek [this message]
2023-09-08 18:50 ` [PATCH printk v4 6/8] printk: nbcon: Add sequence handling John Ogness
2023-09-14 16:02 ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 7/8] printk: nbcon: Add emit function and callback function for atomic printing John Ogness
2023-09-15 8:21 ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 8/8] printk: nbcon: Allow drivers to mark unsafe regions and check state John Ogness
2023-09-15 8:38 ` Petr Mladek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZQMpCDKsfElXIXI7@alley \
--to=pmladek@suse.com \
--cc=john.ogness@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.