From: Wolfram Sang <wsa@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Rosin <peda@axentia.se>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andi Shyti <andi.shyti@kernel.org>
Subject: [PULL REQUEST] i2c-for-6.7-rc1
Date: Sun, 5 Nov 2023 14:47:23 +0100 [thread overview]
Message-ID: <ZUec6zftAPNR+dsb@ninjato> (raw)
[-- Attachment #1: Type: text/plain, Size: 11829 bytes --]
The following changes since commit ce9ecca0238b140b88f43859b211c9fdfd8e5b70:
Linux 6.6-rc2 (2023-09-17 14:40:24 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.7-rc1
for you to fetch changes up to 10e806d39d304f837ed2921f36499f17a774a220:
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void (2023-10-29 22:31:52 +0100)
----------------------------------------------------------------
I2C has largely driver updates for 6.7., i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions... you
name it. The core got a memleak fix and better support for nested muxes.
----------------------------------------------------------------
Alain Volmat (1):
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
Alexander Stein (2):
dt-bindings: at24: add ST M24C64-D Additional Write lockable page
eeprom: at24: add ST M24C64-D Additional Write lockable page support
Andi Shyti (3):
i2c: at91-core: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: Use devm_clk_get_enabled()
Axel Lin (1):
i2c: sun6i-p2wi: Prevent potential division by zero
Benjamin Bara (5):
kernel/reboot: emergency_restart: Set correct system_state
i2c: core: Run atomic i2c xfer when !preemptible
kernel/reboot: Add device to sys_off_handler
mfd: tps6586x: Use devm-based power off handler
mfd: tps6586x: Register restart handler
Biju Das (1):
eeprom: at24: Drop at24_get_chip_data()
Bryan O'Donoghue (1):
dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
Camel Guo (1):
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
Dan Carpenter (1):
i2c: rcar: fix error code in probe()
Daniel Golle (1):
i2c: mt65xx: allow optional pmic clock
Daniel Mack (1):
i2c: core: fix lockdep warning for sparsely nested adapter chain
Geert Uytterhoeven (1):
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
Heiner Kallweit (9):
i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
i2c: i801: unregister tco_pdev in i801_probe() error path
i2c: i801: add helper i801_restore_regs
i2c: i801: simplify module boilerplate code
i2c: i801: use i2c_mark_adapter_suspended/resumed
i2c: i801: replace acpi_lock with I2C bus lock
i2c: i801: Simplify class-based client device instantiation
ACPI: Add helper acpi_use_parent_companion
i2c: i801: Use new helper acpi_use_parent_companion
Ivan Orlov (1):
i2c: dev: make i2c_dev_class a static const structure
Jarkko Nikula (1):
i2c: i801: Add support for Intel Birch Stream SoC
Jason Yan (1):
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
Justin Stitt (2):
i2c: cp2615: replace deprecated strncpy with strscpy
i2c: powermac: replace deprecated strncpy
Kees Cook (3):
i2c: mux: demux-pinctrl: Annotate struct i2c_demux_pinctrl_priv with __counted_by
i2c: Annotate struct i2c_atr with __counted_by
eeprom: at24: Annotate struct at24_data with __counted_by
Luca Weiss (1):
dt-bindings: i2c: qcom-cci: Document SC7280 compatible
Marek Szyprowski (2):
i2c: brcmstb: Add support for atomic transfers
i2c: exynos5: add support for atomic transfers
Marek Vasut (2):
dt-bindings: at24: add ST M24C32-D Additional Write lockable page
eeprom: at24: add ST M24C32-D Additional Write lockable page support
Randy Dunlap (1):
i2c: axxia: eliminate kernel-doc warnings
Rob Herring (1):
i2c: Use device_get_match_data()
Sean Nyekjaer (1):
i2c: stm32f7: Add atomic_xfer method to driver
Shawn Guo (1):
i2c: qcom-geni: add ACPI device id for sc8180x
Wolfram Sang (16):
i2c: rcar: avoid non-standard use of goto
i2c: rcar: properly format a debug output
i2c: rcar: calculate divider instead of brute-forcing it
i2c: rcar: remove open coded DIV_ROUND_CLOSEST
i2c: riic: avoid potential division by zero
Merge tag 'ib-mfd-i2c-reboot-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into i2c/for-mergewindow
Merge branch 'i2c/for-current' into i2c/for-mergewindow
i2c: rcar: reset controller is mandatory for Gen3+
i2c: rcar: improve accuracy for R-Car Gen3+
i2c: gpio: remove error checks with debugfs
i2c: mux: gpio: adhere to coding style
Revert "dt-bindings: i2c: qcom-cci: Document sc8280xp compatible"
Merge tag 'at24-updates-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
i2c: fix memleak in i2c_new_client_device()
MAINTAINERS: add YAML file for i2c-demux-pinctrl
Documentation: i2c: add fault code for not supporting 10 bit addresses
Yann Sionneau (1):
i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
ye xingchen (1):
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
with much appreciated quality assurance from
----------------------------------------------------------------
Andi Shyti (11):
(Rev.) i2c: i801: Use new helper acpi_use_parent_companion
(Rev.) ACPI: Add helper acpi_use_parent_companion
(Rev.) i2c: axxia: eliminate kernel-doc warnings
(Rev.) i2c: exynos5: add support for atomic transfers
(Rev.) i2c: brcmstb: Add support for atomic transfers
(Rev.) i2c: i801: Add support for Intel Birch Stream SoC
(Rev.) i2c: Use device_get_match_data()
(Rev.) i2c: gpio: remove error checks with debugfs
(Rev.) i2c: i801: replace acpi_lock with I2C bus lock
(Rev.) i2c: i801: use i2c_mark_adapter_suspended/resumed
(Rev.) i2c: mt65xx: allow optional pmic clock
Andy Shevchenko (1):
(Rev.) eeprom: at24: Drop at24_get_chip_data()
AngeloGioacchino Del Regno (1):
(Rev.) i2c: mt65xx: allow optional pmic clock
Bryan O'Donoghue (1):
(Rev.) dt-bindings: i2c: qcom-cci: Document SC7280 compatible
Conor Dooley (1):
(Rev.) dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
Dmitry Osipenko (5):
(Rev.) mfd: tps6586x: Register restart handler
(Rev.) mfd: tps6586x: Use devm-based power off handler
(Rev.) kernel/reboot: Add device to sys_off_handler
(Rev.) i2c: core: Run atomic i2c xfer when !preemptible
(Rev.) kernel/reboot: emergency_restart: Set correct system_state
Florian Fainelli (1):
(Rev.) i2c: brcmstb: Add support for atomic transfers
Geert Uytterhoeven (10):
(Rev.) i2c: rcar: fix error code in probe()
(Rev.) i2c: mux: gpio: adhere to coding style
(Rev.) i2c: gpio: remove error checks with debugfs
(Rev.) i2c: rcar: improve accuracy for R-Car Gen3+
(Rev.) i2c: rcar: reset controller is mandatory for Gen3+
(Rev.) i2c: riic: avoid potential division by zero
(Rev.) i2c: rcar: remove open coded DIV_ROUND_CLOSEST
(Rev.) i2c: rcar: calculate divider instead of brute-forcing it
(Rev.) i2c: rcar: properly format a debug output
(Rev.) i2c: rcar: avoid non-standard use of goto
Gustavo A. R. Silva (3):
(Rev.) eeprom: at24: Annotate struct at24_data with __counted_by
(Rev.) i2c: Annotate struct i2c_atr with __counted_by
(Rev.) i2c: mux: demux-pinctrl: Annotate struct i2c_demux_pinctrl_priv with __counted_by
Jean Delvare (8):
(Rev.) i2c: i801: Simplify class-based client device instantiation
(Rev.) i2c: i801: Add support for Intel Birch Stream SoC
(Rev.) i2c: i801: replace acpi_lock with I2C bus lock
(Rev.) i2c: i801: use i2c_mark_adapter_suspended/resumed
(Rev.) i2c: i801: simplify module boilerplate code
(Rev.) i2c: i801: add helper i801_restore_regs
(Rev.) i2c: i801: unregister tco_pdev in i801_probe() error path
(Rev.) i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
Kees Cook (2):
(Rev.) i2c: powermac: replace deprecated strncpy
(Rev.) i2c: cp2615: replace deprecated strncpy with strscpy
Krzysztof Kozlowski (2):
(Rev.) dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
(Rev.) dt-bindings: i2c: qcom-cci: Document SC7280 compatible
Marek Szyprowski (2):
(Test) i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
(Rev.) i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
Marek Vasut (2):
(Rev.) eeprom: at24: add ST M24C64-D Additional Write lockable page support
(Rev.) dt-bindings: at24: add ST M24C64-D Additional Write lockable page
Mika Westerberg (1):
(Rev.) i2c: i801: unregister tco_pdev in i801_probe() error path
Nishanth Menon (2):
(Test) i2c: core: Run atomic i2c xfer when !preemptible
(Test) kernel/reboot: emergency_restart: Set correct system_state
Wolfram Sang (2):
(Test) i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
(Rev.) dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
Documentation/devicetree/bindings/eeprom/at24.yaml | 4 +
.../devicetree/bindings/i2c/i2c-demux-pinctrl.txt | 135 ----------------
.../devicetree/bindings/i2c/i2c-demux-pinctrl.yaml | 172 ++++++++++++++++++++
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
Documentation/i2c/busses/i2c-i801.rst | 1 +
Documentation/i2c/fault-codes.rst | 4 +
MAINTAINERS | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-at91-core.c | 10 +-
drivers/i2c/busses/i2c-axxia.c | 8 +-
drivers/i2c/busses/i2c-brcmstb.c | 23 ++-
drivers/i2c/busses/i2c-cp2615.c | 2 +-
drivers/i2c/busses/i2c-designware-common.c | 17 ++
drivers/i2c/busses/i2c-designware-core.h | 3 +
drivers/i2c/busses/i2c-exynos5.c | 80 ++++++++-
drivers/i2c/busses/i2c-gpio.c | 7 +-
drivers/i2c/busses/i2c-i801.c | 111 +++++--------
drivers/i2c/busses/i2c-mt65xx.c | 12 +-
drivers/i2c/busses/i2c-mv64xxx.c | 11 +-
drivers/i2c/busses/i2c-omap.c | 8 +-
drivers/i2c/busses/i2c-powermac.c | 2 +-
drivers/i2c/busses/i2c-pxa.c | 7 +-
drivers/i2c/busses/i2c-qcom-geni.c | 1 +
drivers/i2c/busses/i2c-rcar.c | 180 +++++++++++++--------
drivers/i2c/busses/i2c-riic.c | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 7 +-
drivers/i2c/busses/i2c-stm32f4.c | 32 ++--
drivers/i2c/busses/i2c-stm32f7.c | 89 ++++++----
drivers/i2c/busses/i2c-sun6i-p2wi.c | 5 +
drivers/i2c/i2c-atr.c | 2 +-
drivers/i2c/i2c-core-base.c | 19 ++-
drivers/i2c/i2c-core.h | 2 +-
drivers/i2c/i2c-dev.c | 18 +--
drivers/i2c/muxes/i2c-demux-pinctrl.c | 12 +-
drivers/i2c/muxes/i2c-mux-gpio.c | 7 +-
drivers/mfd/tps6586x.c | 50 +++++-
drivers/misc/eeprom/at24.c | 42 ++---
include/linux/acpi.h | 5 +
include/linux/reboot.h | 3 +
kernel/reboot.c | 4 +
40 files changed, 666 insertions(+), 435 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2023-11-05 13:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-05 13:47 Wolfram Sang [this message]
2023-11-05 18:53 ` [PULL REQUEST] i2c-for-6.7-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZUec6zftAPNR+dsb@ninjato \
--to=wsa@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.