From: Pengfei Xu <pengfei.xu@intel.com>
To: <elver@google.com>
Cc: <linux-perf-users@archiver.kernel.org>, <heng.su@intel.com>,
<lkp@intel.com>, <peterz@infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [Syzkaller & bisect] There is task hung in perf_tp_event_init in v6.7-rc3 mainline kernel
Date: Wed, 29 Nov 2023 10:24:31 +0800 [thread overview]
Message-ID: <ZWag32wsESemVfuN@xpf.sh.intel.com> (raw)
In-Reply-To: <ZWaeVaNEA/0Oavv8@xpf.sh.intel.com>
On 2023-11-29 at 10:13:41 +0800, Pengfei Xu wrote:
> Hi Marco Elver and perf expert,
>
> Greeting!
>
> There is task hung in perf_tp_event_init in v6.7-rc3 mainline kernel in vm.
> All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/231128_081400_perf_tp_event_init
> Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/repro.c
> Syzkaller repro.report: https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/repro.report
> Syzkaller syscall reproduced step: https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/repro.prog
> Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/bisect_info.log
> Kconfig(Needs make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/kconfig_origin
> v6.7-rc3 dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/231128_081400_perf_tp_event_init/2cc14f52aeb78ce3f29677c2de1f06c0e91471ab_dmesg.log
> v6.7-rc3 bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/231128_081400_perf_tp_event_init/bzImage_2cc14f52aeb78ce3f29677c2de1f06c0e91471ab.tar.gz
> This issue could be reproduced in 3330s.
>
> Bisected the suspected commit is:
> "
> 97ba62b27867 perf: Add support for SIGTRAP on perf events
> "
>
> [ 316.705302] EXT4-fs (sda): error count since last fsck: 8
> [ 316.706021] EXT4-fs (sda): initial error at time 1699515630: ext4_mb_release_inode_pa:5364
> [ 316.706810] EXT4-fs (sda): last error at time 1699515808: mb_free_blocks:1917: block 1286144
> [ 1537.313213] INFO: task repro:960 blocked for more than 143 seconds.
> [ 1537.313584] Not tainted 6.7.0-rc3-2cc14f52aeb7+ #1
> [ 1537.313871] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 1537.314256] task:repro state:D stack:0 pid:960 tgid:960 ppid:743 flags:0x00000006
> [ 1537.314730] Call Trace:
> [ 1537.314878] <TASK>
> [ 1537.315037] __schedule+0xb68/0x3030
> [ 1537.315324] ? __pfx___schedule+0x10/0x10
> [ 1537.315546] ? lock_release+0x417/0x7e0
> [ 1537.315792] ? __pfx_lock_release+0x10/0x10
> [ 1537.316061] ? preempt_count_add+0x9/0x180
> [ 1537.316334] schedule+0xf8/0x310
> [ 1537.316544] schedule_preempt_disabled+0x1c/0x30
> [ 1537.316800] __mutex_lock+0xd8a/0x1a40
> [ 1537.317111] ? perf_trace_init+0x5c/0x310
> [ 1537.317344] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.317650] ? __pfx___mutex_lock+0x10/0x10
> [ 1537.317880] ? ftrace_call+0x5/0x44
> [ 1537.318087] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.318348] ? perf_try_init_event+0x13d/0x5b0
> [ 1537.318646] ? __mutex_lock+0x5/0x1a40
> [ 1537.318894] mutex_lock_nested+0x1f/0x30
> [ 1537.319108] ? mutex_lock_nested+0x1f/0x30
> [ 1537.319338] perf_trace_init+0x5c/0x310
> [ 1537.319583] perf_tp_event_init+0xaf/0x130
> [ 1537.319818] perf_try_init_event+0x13d/0x5b0
> [ 1537.320084] perf_event_alloc.part.0+0xf8f/0x3b10
> [ 1537.320401] ? perf_event_alloc.part.0+0xe73/0x3b10
> [ 1537.320693] __do_sys_perf_event_open+0x51a/0x2c60
> [ 1537.320956] ? lock_release+0x417/0x7e0
> [ 1537.321259] ? __pfx___do_sys_perf_event_open+0x10/0x10
> [ 1537.321646] ? __audit_syscall_entry+0x39e/0x500
> [ 1537.321907] ? __pfx___x64_sys_perf_event_open+0x10/0x10
> [ 1537.322181] ? ktime_get_coarse_real_ts64+0xb5/0xf0
> [ 1537.322479] __x64_sys_perf_event_open+0xc7/0x150
> [ 1537.322733] ? __x64_sys_perf_event_open+0x9/0x150
> [ 1537.322990] ? do_syscall_64+0x42/0xf0
> [ 1537.323204] do_syscall_64+0x42/0xf0
> [ 1537.323414] entry_SYSCALL_64_after_hwframe+0x6e/0x76
> [ 1537.323680] RIP: 0033:0x7efdcb23ee5d
> [ 1537.323881] RSP: 002b:00007fffa75a2f38 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
> [ 1537.324264] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efdcb23ee5d
> [ 1537.324613] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000580
> [ 1537.324961] RBP: 00007fffa75a3140 R08: 0000000000000000 R09: 0000000000000003
> [ 1537.325341] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007fffa75a32d8
> [ 1537.325689] R13: 000000000040672d R14: 0000000000408e08 R15: 00007efdcb460000
> [ 1537.326136] </TASK>
> [ 1537.326266] INFO: task repro:961 blocked for more than 143 seconds.
> [ 1537.326576] Not tainted 6.7.0-rc3-2cc14f52aeb7+ #1
> [ 1537.326842] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 1537.327217] task:repro state:D stack:0 pid:961 tgid:961 ppid:742 flags:0x00004006
> [ 1537.327680] Call Trace:
> [ 1537.327822] <TASK>
> [ 1537.327976] __schedule+0xb68/0x3030
> [ 1537.328231] ? __pfx___schedule+0x10/0x10
> [ 1537.328446] ? lock_release+0x417/0x7e0
> [ 1537.328685] ? __pfx_lock_release+0x10/0x10
> [ 1537.328949] ? preempt_count_add+0x9/0x180
> [ 1537.329245] schedule+0xf8/0x310
> [ 1537.329452] schedule_preempt_disabled+0x1c/0x30
> [ 1537.329702] __mutex_lock+0xd8a/0x1a40
> [ 1537.329932] ? perf_trace_init+0x5c/0x310
> [ 1537.330156] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.330455] ? __pfx___mutex_lock+0x10/0x10
> [ 1537.330684] ? ftrace_call+0x5/0x44
> [ 1537.330889] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.331150] ? perf_try_init_event+0x13d/0x5b0
> [ 1537.331450] ? __mutex_lock+0x5/0x1a40
> [ 1537.331698] mutex_lock_nested+0x1f/0x30
> [ 1537.331912] ? mutex_lock_nested+0x1f/0x30
> [ 1537.332138] perf_trace_init+0x5c/0x310
> [ 1537.332384] perf_tp_event_init+0xaf/0x130
> [ 1537.332617] perf_try_init_event+0x13d/0x5b0
> [ 1537.332883] perf_event_alloc.part.0+0xf8f/0x3b10
> [ 1537.333231] ? perf_event_alloc.part.0+0xe73/0x3b10
> [ 1537.333523] __do_sys_perf_event_open+0x51a/0x2c60
> [ 1537.333785] ? lock_release+0x417/0x7e0
> [ 1537.334056] ? __pfx___do_sys_perf_event_open+0x10/0x10
> [ 1537.334444] ? __audit_syscall_entry+0x39e/0x500
> [ 1537.334703] ? __pfx___x64_sys_perf_event_open+0x10/0x10
> [ 1537.334979] ? ktime_get_coarse_real_ts64+0xb5/0xf0
> [ 1537.335278] __x64_sys_perf_event_open+0xc7/0x150
> [ 1537.335533] ? __x64_sys_perf_event_open+0x9/0x150
> [ 1537.335791] ? do_syscall_64+0x42/0xf0
> [ 1537.336005] do_syscall_64+0x42/0xf0
> [ 1537.336213] entry_SYSCALL_64_after_hwframe+0x6e/0x76
> [ 1537.336477] RIP: 0033:0x7efdcb23ee5d
> [ 1537.336677] RSP: 002b:00007fffa75a2f38 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
> [ 1537.337091] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efdcb23ee5d
> [ 1537.337439] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000580
> [ 1537.337788] RBP: 00007fffa75a3140 R08: 0000000000000000 R09: 0000000000000003
> [ 1537.338136] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007fffa75a32d8
> [ 1537.338484] R13: 000000000040672d R14: 0000000000408e08 R15: 00007efdcb460000
> [ 1537.338932] </TASK>
> [ 1537.339062] INFO: task repro:962 blocked for more than 143 seconds.
> [ 1537.339377] Not tainted 6.7.0-rc3-2cc14f52aeb7+ #1
> [ 1537.339644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 1537.340019] task:repro state:D stack:0 pid:962 tgid:962 ppid:734 flags:0x00000006
> [ 1537.340481] Call Trace:
> [ 1537.340622] <TASK>
> [ 1537.340777] __schedule+0xb68/0x3030
> [ 1537.341063] ? __pfx___schedule+0x10/0x10
> [ 1537.341280] ? lock_release+0x417/0x7e0
> [ 1537.341519] ? __pfx_lock_release+0x10/0x10
> [ 1537.341783] ? preempt_count_add+0x9/0x180
> [ 1537.342048] schedule+0xf8/0x310
> [ 1537.342256] schedule_preempt_disabled+0x1c/0x30
> [ 1537.342507] __mutex_lock+0xd8a/0x1a40
> [ 1537.342738] ? perf_trace_init+0x5c/0x310
> [ 1537.342962] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.343264] ? __pfx___mutex_lock+0x10/0x10
> [ 1537.343494] ? ftrace_call+0x5/0x44
> [ 1537.343699] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.343961] ? perf_try_init_event+0x13d/0x5b0
> [ 1537.344258] ? __mutex_lock+0x5/0x1a40
> [ 1537.344507] mutex_lock_nested+0x1f/0x30
> [ 1537.344722] ? mutex_lock_nested+0x1f/0x30
> [ 1537.344948] perf_trace_init+0x5c/0x310
> [ 1537.345236] perf_tp_event_init+0xaf/0x130
> [ 1537.345470] perf_try_init_event+0x13d/0x5b0
> [ 1537.345736] perf_event_alloc.part.0+0xf8f/0x3b10
> [ 1537.346054] ? perf_event_alloc.part.0+0xe73/0x3b10
> [ 1537.346346] __do_sys_perf_event_open+0x51a/0x2c60
> [ 1537.346609] ? lock_release+0x417/0x7e0
> [ 1537.346881] ? __pfx___do_sys_perf_event_open+0x10/0x10
> [ 1537.347280] ? __audit_syscall_entry+0x39e/0x500
> [ 1537.347543] ? __pfx___x64_sys_perf_event_open+0x10/0x10
> [ 1537.347818] ? ktime_get_coarse_real_ts64+0xb5/0xf0
> [ 1537.348116] __x64_sys_perf_event_open+0xc7/0x150
> [ 1537.348371] ? __x64_sys_perf_event_open+0x9/0x150
> [ 1537.348629] ? do_syscall_64+0x42/0xf0
> [ 1537.348843] do_syscall_64+0x42/0xf0
> [ 1537.349082] entry_SYSCALL_64_after_hwframe+0x6e/0x76
> [ 1537.349346] RIP: 0033:0x7efdcb23ee5d
> [ 1537.349546] RSP: 002b:00007fffa75a2f38 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
> [ 1537.349928] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efdcb23ee5d
> [ 1537.350277] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000580
> [ 1537.350625] RBP: 00007fffa75a3140 R08: 0000000000000000 R09: 0000000000000003
> [ 1537.350974] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007fffa75a32d8
> [ 1537.351325] R13: 000000000040672d R14: 0000000000408e08 R15: 00007efdcb460000
> [ 1537.351773] </TASK>
> [ 1537.351903] INFO: task repro:963 blocked for more than 143 seconds.
> [ 1537.352212] Not tainted 6.7.0-rc3-2cc14f52aeb7+ #1
> [ 1537.352478] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 1537.352853] task:repro state:D stack:0 pid:963 tgid:963 ppid:741 flags:0x00004006
> [ 1537.353349] Call Trace:
> [ 1537.353492] <TASK>
> [ 1537.353646] __schedule+0xb68/0x3030
> [ 1537.353900] ? __pfx___schedule+0x10/0x10
> [ 1537.354115] ? lock_release+0x417/0x7e0
> [ 1537.354355] ? __pfx_lock_release+0x10/0x10
> [ 1537.354618] ? preempt_count_add+0x9/0x180
> [ 1537.354884] schedule+0xf8/0x310
> [ 1537.355090] schedule_preempt_disabled+0x1c/0x30
> [ 1537.355343] __mutex_lock+0xd8a/0x1a40
> [ 1537.355574] ? perf_trace_init+0x5c/0x310
> [ 1537.355798] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.356096] ? __pfx___mutex_lock+0x10/0x10
> [ 1537.356326] ? ftrace_call+0x5/0x44
> [ 1537.356531] ? arch_ftrace_ops_list_func+0x1ad/0x550
> [ 1537.356792] ? perf_try_init_event+0x13d/0x5b0
> [ 1537.357116] ? __mutex_lock+0x5/0x1a40
> [ 1537.357365] mutex_lock_nested+0x1f/0x30
> [ 1537.357580] ? mutex_lock_nested+0x1f/0x30
> [ 1537.357805] perf_trace_init+0x5c/0x310
> [ 1537.358051] perf_tp_event_init+0xaf/0x130
> [ 1537.358285] perf_try_init_event+0x13d/0x5b0
> [ 1537.358551] perf_event_alloc.part.0+0xf8f/0x3b10
> [ 1537.358870] ? perf_event_alloc.part.0+0xe73/0x3b10
> [ 1537.359162] __do_sys_perf_event_open+0x51a/0x2c60
> [ 1537.359428] ? lock_release+0x417/0x7e0
> [ 1537.359700] ? __pfx___do_sys_perf_event_open+0x10/0x10
> [ 1537.360089] ? __audit_syscall_entry+0x39e/0x500
> [ 1537.360348] ? __pfx___x64_sys_perf_event_open+0x10/0x10
> [ 1537.360624] ? ktime_get_coarse_real_ts64+0xb5/0xf0
> [ 1537.360921] __x64_sys_perf_event_open+0xc7/0x150
> [ 1537.361207] ? __x64_sys_perf_event_open+0x9/0x150
> [ 1537.361466] ? do_syscall_64+0x42/0xf0
> [ 1537.361680] do_syscall_64+0x42/0xf0
> [ 1537.361888] entry_SYSCALL_64_after_hwframe+0x6e/0x76
> [ 1537.362152] RIP: 0033:0x7efdcb23ee5d
> [ 1537.362352] RSP: 002b:00007fffa75a2f38 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
> [ 1537.362734] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efdcb23ee5d
> [ 1537.363083] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000580
> [ 1537.363434] RBP: 00007fffa75a3140 R08: 0000000000000000 R09: 0000000000000003
> [ 1537.363782] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007fffa75a32d8
> [ 1537.364130] R13: 000000000040672d R14: 0000000000408e08 R15: 00007efdcb460000
> [ 1537.364577] </TASK>
> [ 1537.364708]
> [ 1537.364708] Showing all locks held in the system:
> [ 1537.365016] 1 lock held by khungtaskd/31:
> [ 1537.365259] #0: ffffffff86c5b6e0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x71/0x370
> [ 1537.365780] 1 lock held by repro/958:
> [ 1537.365976] #0: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_destroy+0x2c/0x1d0
> [ 1537.366470] 5 locks held by repro/959:
> [ 1537.366670] 2 locks held by repro/960:
> [ 1537.366868] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.367383] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.367863] 2 locks held by repro/961:
> [ 1537.368066] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.368578] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.369091] 2 locks held by repro/962:
> [ 1537.369290] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.369802] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.370283] 2 locks held by repro/963:
> [ 1537.370481] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.370993] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.371478] 2 locks held by repro/964:
> [ 1537.371677] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.372188] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.372669] 2 locks held by repro/965:
> [ 1537.372867] #0: ffffffff8926f830 (&pmus_srcu){.+.+}-{0:0}, at: perf_event_alloc.part.0+0xd1d/0x3b10
> [ 1537.373424] #1: ffffffff86d7ff08 (event_mutex){+.+.}-{3:3}, at: perf_trace_init+0x5c/0x310
> [ 1537.373904]
> [ 1537.374003] =============================================
>
> ---
>
> If you don't need the following environment to reproduce the problem or if you
> already have one reproduced environment, please ignore the following information.
>
> How to reproduce:
> git clone https://gitlab.com/xupengfe/repro_vm_env.git
> cd repro_vm_env
> tar -xvf repro_vm_env.tar.gz
> cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
> // start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
> // You could change the bzImage_xxx as you want
> // Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
> You could use below command to log in, there is no password for root.
> ssh -p 10023 root@localhost
>
> After login vm(virtual machine) successfully, you could transfer reproduced
> binary to the vm by below way, and reproduce the problem in vm:
> gcc -pthread -o repro repro.c
> scp -P 10023 repro root@localhost:/root/
>
> Get the bzImage for target kernel:
> Please use target kconfig and copy it to kernel_src/.config
> make olddefconfig
> make -jx bzImage //x should equal or less than cpu num your pc has
>
> Fill the bzImage file into above start3.sh to load the target kernel in vm.
>
>
> Tips:
> If you already have qemu-system-x86_64, please ignore below info.
> If you want to install qemu v7.1.0 version:
> git clone https://github.com/qemu/qemu.git
> cd qemu
> git checkout -f v7.1.0
> mkdir build
> cd build
> yum install -y ninja-build.x86_64
> yum -y install libslirp-devel.x86_64
> ../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp
> make
> make install
>
> Best Regards,
> Thanks!
next parent reply other threads:[~2023-11-29 2:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <ZWaeVaNEA/0Oavv8@xpf.sh.intel.com>
2023-11-29 2:24 ` Pengfei Xu [this message]
2023-11-29 7:41 ` [Syzkaller & bisect] There is task hung in perf_tp_event_init in v6.7-rc3 mainline kernel Marco Elver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZWag32wsESemVfuN@xpf.sh.intel.com \
--to=pengfei.xu@intel.com \
--cc=elver@google.com \
--cc=heng.su@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@archiver.kernel.org \
--cc=lkp@intel.com \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.