[PATCH v3 1/4] dt-bindings: input: iqs269a: Add bindings for slider gestures

[Jeff LaBundy <jeff@labundy.com>]

This patch adds bindings for slider gestures that can be expressed
by the device.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v3:
 - None

Changes in v2:
 - Renamed 'azoteq,slider-swipe' to 'azoteq,gesture-swipe' to match IQS626A and
   noted it as depending upon 'linux,keycodes'
 - Dropped the $ref declaration for 'linux,keycodes' and referenced input.yaml,
   which has since been updated to define this property

 .../devicetree/bindings/input/iqs269a.yaml    | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 3c430d38594f..b42f07542d27 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS269A is an 8-channel capacitive touch controller that features
   additional Hall-effect and inductive sensing capabilities.
@@ -204,6 +207,63 @@ properties:
     default: 1
     description: Specifies the slider coordinate filter strength.
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Specifies the numeric keycodes associated with each available gesture in
+      the following order (enter 0 for unused gestures):
+      0: Slider 0 tap
+      1: Slider 0 hold
+      2: Slider 0 positive flick or swipe
+      3: Slider 0 negative flick or swipe
+      4: Slider 1 tap
+      5: Slider 1 hold
+      6: Slider 1 positive flick or swipe
+      7: Slider 1 negative flick or swipe
+
+  azoteq,gesture-swipe:
+    type: boolean
+    description:
+      Directs the device to interpret axial gestures as a swipe (finger remains
+      on slider) instead of a flick (finger leaves slider).
+
+  azoteq,timeout-tap-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 400
+    description:
+      Specifies the length of time (in ms) within which a slider touch must be
+      released in order to be interpreted as a tap. Default and maximum values
+      as well as step size are reduced by a factor of 4 with device version 2.
+
+  azoteq,timeout-swipe-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 2000
+    description:
+      Specifies the length of time (in ms) within which an axial gesture must be
+      completed in order to be interpreted as a flick or swipe. Default and max-
+      imum values as well as step size are reduced by a factor of 4 with device
+      version 2.
+
+  azoteq,thresh-swipe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    default: 128
+    description:
+      Specifies the number of points across which an axial gesture must travel
+      in order to be interpreted as a flick or swipe.
+
+dependencies:
+  azoteq,gesture-swipe: ["linux,keycodes"]
+  azoteq,timeout-tap-ms: ["linux,keycodes"]
+  azoteq,timeout-swipe-ms: ["linux,keycodes"]
+  azoteq,thresh-swipe: ["linux,keycodes"]
+
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -484,6 +544,14 @@ examples:
                     azoteq,hall-enable;
                     azoteq,suspend-mode = <2>;
 
+                    linux,keycodes = <KEY_PLAYPAUSE>,
+                                     <KEY_STOPCD>,
+                                     <KEY_NEXTSONG>,
+                                     <KEY_PREVIOUSSONG>;
+
+                    azoteq,timeout-tap-ms = <400>;
+                    azoteq,timeout-swipe-ms = <800>;
+
                     channel@0 {
                             reg = <0x0>;
 
-- 
2.34.1