Re: [PATCH net-next 03/15] net: phy: realtek: rework MMD register access methods

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Wed, Dec 20, 2023 at 04:55:06PM +0100, Marek Behún wrote:
> The .read_mmd() and .write_mmd() methods for rtlgen and rtl822x
> currently allow access to only 6 MMD registers, via a vendor specific
> mechanism (a paged read / write).
> 
> The PHY specification explains that MMD registers for MMDs 1 to 30 can
> be accessed via the clause 22 indirect mechanism through registers 13
> and 14, but this is not possible for MMD 31.
> 
> A Realtek contact explained that MMD 31 registers can be accessed by
> setting clause 22 page register (register 31):
>   page = mmd_reg >> 4
>   reg = 0x10 | ((mmd_reg & 0xf) >> 1)
> 
> This mechanism is currently used in the driver. For example the
> .read_mmd() method accesses the PCS.EEE_ABLE register by setting page
> to 0xa5c and accessing register 0x12. By the formulas above, this
> corresponds to MMD register 31.a5c4. The Realtek contact confirmed that
> the PCS.EEE_ABLE register (3.0014) is also available via MMD alias
> 31.a5c4, and this is also true for the other registers:
> 
>   register name   address   page.reg  alias
>   PCS.EEE_ABLE    3.0x0014  0xa5c.12  31.0xa5c4
>   PCS.EEE_ABLE2   3.0x0015  0xa6e.16  31.0xa6ec
>   AN.EEE_ADV      7.0x003c  0xa5d.10  31.0xa5d0
>   AN.EEE_LPABLE   7.0x003d  0xa5d.11  31.0xa5d2
>   AN.EEE_ADV2     7.0x003e  0xa6d.12  31.0xa6d4
>   AN.EEE_LPABLE2  7.0x003f  0xa6d.10  31.0xa6d0
> 
> Since the registers are also available at the true MMD addresses where
> they can be accessed via the indirect mechanism (via registers 13 and
> 14) we can rework the code to be more generic and allow access to all
> MMD registers.
> 
> Rework the .read_mmd() and .write_mmd() methods for rtlgen and rtl822x
> PHYs:
> - use direct clause 45 access if the MDIO bus supports it
> - use the indirect access via clause 22 registers 13 and 14 for MMDs
>   1 to 30
> - use the vendor specific method to access MMD 31 registers
> 
> Signed-off-by: Marek Behún <kabel@kernel.org>
> ---

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Thanks!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!