Re: [PATCH RFC net-next 3/5] net: phy: add Marvell PHY PTP support

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Mon, Apr 14, 2025 at 02:33:06PM +0200, Kory Maincent wrote:
> On Fri, 11 Apr 2025 22:26:42 +0100
> Russell King <rmk+kernel@armlinux.org.uk> wrote:
> 
> > Add PTP basic support for Marvell 88E151x single port PHYs.  These
> > PHYs support timestamping the egress and ingress of packets, but does
> > not support any packet modification, nor do we support any filtering
> > beyond selecting packets that the hardware recognises as PTP/802.1AS.
> > 
> > The PHYs support hardware pins for providing an external clock for the
> > TAI counter, and a separate pin that can be used for event capture or
> > generation of a trigger (either a pulse or periodic). Only event
> > capture is supported.
> > 
> > We currently use a delayed work to poll for the timestamps which is
> > far from ideal, but we also provide a function that can be called from
> > an interrupt handler - which would be good to tie into the main Marvell
> > PHY driver.
> > 
> > The driver takes inspiration from the Marvell 88E6xxx DSA and DP83640
> > drivers. The hardware is very similar to the implementation found in
> > the 88E6xxx DSA driver, but the access methods are very different,
> > although it may be possible to create a library that both can use
> > along with accessor functions.
> 
> I wanted to test it, but this patch does not build.
> 
> drivers/net/phy/marvell_ptp.c:269:33: error: passing argument 4 of ‘marvell_tai_probe’ from incompatible pointer type [-Werror=incompatible-pointer-types]
>   269 |                                 "Marvell PHY", dev);
>       |                                 ^~~~~~~~~~~~~
>       |                                 |
>       |                                 char *
> In file included from drivers/net/phy/marvell_ptp.c:9:
> ./include/linux/marvell_ptp.h:81:44: note: expected ‘struct ptp_pin_desc *’ but argument is of type ‘char *’
>    81 |                       struct ptp_pin_desc *pin_config, int n_pins,
>       |                       ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~
> drivers/net/phy/marvell_ptp.c:269:48: warning: passing argument 5 of ‘marvell_tai_probe’ makes integer from pointer without a cast [-Wint-conversion]
>   269 |                                 "Marvell PHY", dev);
>       |                                                ^~~
>       |                                                |
>       |                                                struct device *
> In file included from drivers/net/phy/marvell_ptp.c:9:
> ./include/linux/marvell_ptp.h:81:60: note: expected ‘int’ but argument is of type ‘struct device *’
>    81 |                       struct ptp_pin_desc *pin_config, int n_pins,
>       |                                                        ~~~~^~~~~~
> drivers/net/phy/marvell_ptp.c:267:15: error: too few arguments to function ‘marvell_tai_probe’
>   267 |         err = marvell_tai_probe(&tai, &marvell_phy_ptp_ops,
>       |               ^~~~~~~~~~~~~~~~~
> In file included from drivers/net/phy/marvell_ptp.c:9:
> ./include/linux/marvell_ptp.h:78:5: note: declared here
>    78 | int marvell_tai_probe(struct marvell_tai **taip,
>       |     ^~~~~~~~~~~~~~~~~
> 

Add NULL, 0 before the name.

Sorry, but I have way too many patches to deal with.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!