From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [git pull] Input updates for v6.8-rc0
Date: Thu, 18 Jan 2024 10:16:17 -0800 [thread overview]
Message-ID: <Zalq8fauylyDfoXf@google.com> (raw)
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git tags/input-for-v6.8-rc0
to receive updates for the input subsystem. You will get:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes.
Changelog:
---------
Andreas Kemnade (4):
Input: omap4-keypad - react on keypresses if device is runtime-suspended
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: touchscreen: neonode,zforce: Use standard properties
Input: zforce_ts - accept standard touchscreen properties
Anshul Dalal (4):
dt-bindings: input: gpio-mouse: Convert to json-schema
dt-bindings: input: convert drv266x to json-schema
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: driver for Adafruit Seesaw Gamepad
Biju Das (3):
Input: da9063 - simplify obtaining OF match data
Input: da9063 - drop redundant prints in probe()
Input: da9063 - use dev_err_probe()
Christophe JAILLET (1):
Input: xpad - remove usage of the deprecated ida_simple_xx() API
Dmitry Torokhov (2):
Input: da9063_onkey - avoid using OF-specific APIs
Input: da9063_onkey - avoid explicitly setting input's parent
Hans de Goede (1):
Input: atkbd - use ab83 as id when skipping the getid command
Hermes Zhang (1):
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Jeff LaBundy (4):
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for OTP variants
Jiri Valek - 2N (3):
Input: cap11xx - remove unnecessary IRQ parsing
dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings
Input: cap11xx - add advanced sensitivity settings
Krzysztof Kozlowski (1):
dt-bindings: input: samsung,s6sy761: convert to DT schema
Linus Walleij (4):
Input: navpoint - convert to use GPIO descriptor
Input: tca6416-keypad - drop unused include
Input: omap-keypad - drop optional GPIO support
Input: as5011 - convert to GPIO descriptor
Marcus Folkesson (1):
Input: pxrc - simplify mutex handling with guard macro
Marek Szyprowski (1):
Input: max77693-haptic - add device-tree compatible strings
Mark Brown (3):
Input: cap11xx - cache hardware ID registers
Input: cap11xx - convert to use maple tree register cache
Input: qt1050 - convert to use maple tree register cache
Rob Herring (2):
dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete example
dt-bindings: input: mediatek,pmic-keys: Drop incomplete example
Tony Lindgren (2):
dt-bindings: input: gpio-keys: Allow optional dedicated wakeirq
Input: gpio-keys - add system suspend support for dedicated wakeirqs
ye xingchen (7):
Input: use sysfs_emit() instead of scnprintf()
Input: mouse - use sysfs_emit[_at]() instead of scnprintf()
Input: touchscreen - use sysfs_emit[_at]() instead of scnprintf()
Input: synaptics-rmi4 - use sysfs_emit() to instead of scnprintf()
Input: ims-pcu - use sysfs_emit() instead of scnprintf()
Input: iqs269a - use sysfs_emit() instead of scnprintf()
Input: vivaldi - convert to use sysfs_emit_at() API
Diffstat:
--------
.../bindings/input/adafruit,seesaw-gamepad.yaml | 63 ++++
.../devicetree/bindings/input/gpio-keys.yaml | 41 ++-
.../devicetree/bindings/input/gpio-mouse.txt | 32 --
.../devicetree/bindings/input/gpio-mouse.yaml | 68 +++++
.../devicetree/bindings/input/iqs269a.yaml | 98 +++++-
.../bindings/input/mediatek,pmic-keys.yaml | 24 +-
.../bindings/input/microchip,cap11xx.yaml | 80 ++++-
.../bindings/input/sprd,sc27xx-vibrator.yaml | 19 +-
.../devicetree/bindings/input/ti,drv2665.txt | 17 --
.../devicetree/bindings/input/ti,drv2667.txt | 17 --
.../devicetree/bindings/input/ti,drv266x.yaml | 50 +++
.../bindings/input/touchscreen/neonode,zforce.yaml | 72 +++++
.../bindings/input/touchscreen/samsung,s6sy761.txt | 32 --
.../input/touchscreen/samsung,s6sy761.yaml | 54 ++++
.../bindings/input/touchscreen/zforce_ts.txt | 34 ---
MAINTAINERS | 7 +
drivers/input/input.c | 8 +-
drivers/input/joystick/Kconfig | 10 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/adafruit-seesaw.c | 315 +++++++++++++++++++
drivers/input/joystick/as5011.c | 24 +-
drivers/input/joystick/pxrc.c | 42 ++-
drivers/input/joystick/xpad.c | 6 +-
drivers/input/keyboard/atkbd.c | 12 +-
drivers/input/keyboard/cap11xx.c | 253 ++++++++++++----
drivers/input/keyboard/gpio_keys.c | 75 ++++-
drivers/input/keyboard/omap-keypad.c | 19 +-
drivers/input/keyboard/omap4-keypad.c | 15 +-
drivers/input/keyboard/qt1050.c | 2 +-
drivers/input/keyboard/tca6416-keypad.c | 1 -
drivers/input/misc/da9063_onkey.c | 69 ++---
drivers/input/misc/ims-pcu.c | 10 +-
drivers/input/misc/iqs269a.c | 335 ++++++++++++++++++---
drivers/input/misc/max77693-haptic.c | 14 +-
drivers/input/mouse/cyapa.c | 22 +-
drivers/input/mouse/cyapa_gen3.c | 2 +-
drivers/input/mouse/cyapa_gen5.c | 4 +-
drivers/input/mouse/cyapa_gen6.c | 20 +-
drivers/input/mouse/elan_i2c_core.c | 18 +-
drivers/input/mouse/navpoint.c | 41 +--
drivers/input/rmi4/rmi_f01.c | 13 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 21 +-
drivers/input/touchscreen/edt-ft5x06.c | 2 +-
drivers/input/touchscreen/hideep.c | 6 +-
drivers/input/touchscreen/hycon-hy46xx.c | 2 +-
drivers/input/touchscreen/ilitek_ts_i2c.c | 16 +-
drivers/input/touchscreen/iqs5xx.c | 12 +-
drivers/input/touchscreen/iqs7211.c | 12 +-
drivers/input/touchscreen/melfas_mip4.c | 16 +-
drivers/input/touchscreen/usbtouchscreen.c | 4 +-
drivers/input/touchscreen/wdt87xx_i2c.c | 6 +-
drivers/input/touchscreen/zforce_ts.c | 34 +--
drivers/input/vivaldi-fmap.c | 6 +-
include/linux/gpio_keys.h | 2 +
include/linux/input/as5011.h | 1 -
include/linux/input/navpoint.h | 1 -
include/linux/platform_data/keypad-omap.h | 3 -
57 files changed, 1633 insertions(+), 550 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
delete mode 100644 Documentation/devicetree/bindings/input/gpio-mouse.txt
create mode 100644 Documentation/devicetree/bindings/input/gpio-mouse.yaml
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2665.txt
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
create mode 100644 Documentation/devicetree/bindings/input/ti,drv266x.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
create mode 100644 drivers/input/joystick/adafruit-seesaw.c
Thanks.
--
Dmitry
next reply other threads:[~2024-01-18 18:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 18:16 Dmitry Torokhov [this message]
2024-01-19 1:24 ` [git pull] Input updates for v6.8-rc0 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zalq8fauylyDfoXf@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.