From: Vinod Koul <vkoul@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Nathan Chancellor <nathan@kernel.org>
Subject: Re: [GIT PULL]: dmaengine updates for v6.8
Date: Sun, 21 Jan 2024 01:07:48 +0530 [thread overview]
Message-ID: <ZawhDA2SlQAVNsFO@matsya> (raw)
In-Reply-To: <ZalezMgxAVyu5WEE@matsya>
[-- Attachment #1: Type: text/plain, Size: 12126 bytes --]
Hi Linus,
On 18-01-24, 22:54, Vinod Koul wrote:
> Heya Linus,
>
> Last pull request for the night to receive the dmaengine subsystem
> updates containing one new driver, couple of device support (qualcomm,
> sf-pdma) and driver updates.
>
> The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:
>
> Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git tags/dmaengine-6.8-rc1
I have picked the fixes from Nathan and also found that with W=1 there
were few other warnings reported, so picked/fixed them up as well. Added
this to my test scripts so shouldnt be missed in the future.
I have merged this tag into my fixes branch and applied the changes on top. So
the diff stat mentions older fixes already picked. I guess that wasnt a
smart move, I should have picked changes on top of next.
Nevertheless I hope to not miss it again so please consider older pull
request and then the below fixes request for v6.8-rc1
The following changes since commit 3d0b2176e04261ab4ac095ff2a17db077fc1e46d:
dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma (2023-12-22 21:17:52 +0530)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git tags/dmaengine-fix-6.8-rc1
for you to fetch changes up to cb95a4fa50bbc1262bfb7fea482388a50b12948f:
dmaengine: dw-edma: increase size of 'name' in debugfs code (2024-01-19 18:17:34 +0530)
----------------------------------------------------------------
dmaengine fixes for v6.8-rc1
Driver fixes for:
- Xilinx xdma driver operator precedence and initialization fix
- Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers
- format-overflow warning fix for rz-dmac, sh usb dmac drivers
- 'output may be truncated' fix for shdma, fsl-qdma and dw-edma drivers
----------------------------------------------------------------
Amelie Delaunay (1):
dmaengine: stm32-dma: avoid bitfield overflow assertion
Frank Li (1):
dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
Guanjun (2):
dmaengine: idxd: Protect int_handle field in hw descriptor
dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
Jai Luthra (1):
dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
Jan Kuliga (1):
dmaengine: xilinx: xdma: Fix kernel-doc warnings
Lad Prabhakar (2):
dmaengine: sh: rz-dmac: Avoid format-overflow warning
dmaengine: usb-dmac: Avoid format-overflow warning
Nathan Chancellor (2):
dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
Randy Dunlap (1):
dmaengine: imx-sdma: fix Excess kernel-doc warnings
Ronald Wahl (1):
dmaengine: ti: k3-psil-am62: Fix SPI PDMA data
Vinod Koul (4):
Merge tag 'dmaengine-6.8-rc1' into fixes
dmaengine: shdma: increase size of 'dev_id'
dmaengine: fsl-qdma: increase size of 'irq_name'
dmaengine: dw-edma: increase size of 'name' in debugfs code
Xiaolei Wang (2):
dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
Yang Yingliang (1):
dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 4 ++--
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 4 ++--
drivers/dma/fsl-edma-common.c | 1 +
drivers/dma/fsl-edma-main.c | 12 ++++++++----
drivers/dma/fsl-qdma.c | 2 +-
drivers/dma/idxd/registers.h | 12 +++++++-----
drivers/dma/idxd/submit.c | 14 +++++++-------
drivers/dma/imx-sdma.c | 4 ----
drivers/dma/sh/rz-dmac.c | 8 ++++----
drivers/dma/sh/shdma.h | 2 +-
drivers/dma/sh/usb-dmac.c | 10 +++++-----
drivers/dma/stm32-dma.c | 8 ++++++--
drivers/dma/ti/k3-psil-am62.c | 12 ++++++------
drivers/dma/ti/k3-psil-am62a.c | 12 ++++++------
drivers/dma/xilinx/xdma.c | 21 +++++++++++----------
15 files changed, 67 insertions(+), 59 deletions(-)
>
> for you to fetch changes up to 3d0b2176e04261ab4ac095ff2a17db077fc1e46d:
>
> dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma (2023-12-22 21:17:52 +0530)
>
> ----------------------------------------------------------------
> dmaengine updates for v6.8
>
> New support:
> - Loongson LS2X APB DMA controller
> - sf-pdma: mpfs-pdma support
> - Qualcomm X1E80100 GPI dma controller support
>
> Updates:
> - Xilinx XDMA updates to support interleaved DMA transfers
> - TI PSIL threads for AM62P and J722S and cfg register regions description
> - axi-dmac Improving the cyclic DMA transfers
> - Tegra Support dma-channel-mask property
> - Remaining platform remove callback returning void conversions
>
> ----------------------------------------------------------------
> Amelie Delaunay (2):
> dmaengine: dmatest: prevent using swiotlb buffer with nobounce parameter
> dmaengine: fix NULL pointer in channel unregistration function
>
> Binbin Zhou (2):
> dt-bindings: dmaengine: Add Loongson LS2X APB DMA controller
> dmaengine: ls2x-apb: New driver for the Loongson LS2X APB DMA controller
>
> Bumyong Lee (1):
> dmaengine: pl330: issue_pending waits until WFP state
>
> Christophe JAILLET (1):
> dmaengine: idxd: Remove usage of the deprecated ida_simple_xx() API
>
> Frank Li (3):
> dmaengine: fsl-edma: fix eDMAv4 channel allocation issue
> dt-bindings: dma: fsl-edma: Add fsl-edma.h to prevent hardcoding in dts
> dmaengine: fsl-edma: utilize common dt-binding header file
>
> Hector Martin (1):
> dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
>
> Jan Kuliga (8):
> dmaengine: xilinx: xdma: Get rid of unused code
> dmaengine: xilinx: xdma: Add necessary macro definitions
> dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
> dmaengine: xilinx: xdma: Rework xdma_terminate_all()
> dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
> dmaengine: xilinx: xdma: Add transfer error reporting
> dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
> dmaengine: xilinx: xdma: Implement interleaved DMA transfers
>
> Lad Prabhakar (1):
> dt-bindings: dma: rz-dmac: Document RZ/Five SoC
>
> Miquel Raynal (4):
> dmaengine: xilinx: xdma: Fix the count of elapsed periods in cyclic mode
> dmaengine: xilinx: xdma: Clarify the logic between cyclic/sg modes
> dmaengine: xilinx: xdma: Better handling of the busy variable
> dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks
>
> Mohan Kumar (2):
> dt-bindings: dma: Add dma-channel-mask to nvidia,tegra210-adma
> dmaengine: tegra210-adma: Support dma-channel-mask property
>
> Neil Armstrong (1):
> dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine
>
> Paul Cercueil (5):
> dmaengine: axi-dmac: Small code cleanup
> dmaengine: axi-dmac: Allocate hardware descriptors
> dmaengine: axi-dmac: Add support for scatter-gather transfers
> dmaengine: axi-dmac: Use only EOT interrupts when doing scatter-gather
> dmaengine: axi-dmac: Improve cyclic DMA transfers in SG mode
>
> Randy Dunlap (1):
> dmaengine: std_dma40: fix kernel-doc warnings and spelling
>
> Rex Zhang (1):
> dmaengine: idxd: Move dma_free_coherent() out of spinlocked context
>
> Rob Herring (1):
> dt-bindings: dma: Drop undocumented examples
>
> Shravan Chippa (3):
> dmaengine: sf-pdma: Support of_dma_controller_register()
> dt-bindings: dma: sf-pdma: add new compatible name
> dmaengine: sf-pdma: add mpfs-pdma compatible name
>
> Sibi Sankar (1):
> dt-bindings: dma: qcom: gpi: add compatible for X1E80100
>
> Uwe Kleine-König (4):
> dmaengine: milbeaut-hdmac: Convert to platform remove callback returning void
> dmaengine: milbeaut-xdmac: Convert to platform remove callback returning void
> dmaengine: uniphier-mdmac: Convert to platform remove callback returning void
> dmaengine: uniphier-xdmac: Convert to platform remove callback returning void
>
> Vignesh Raghavendra (5):
> dt-bindings: dma: ti: k3-*: Add descriptions for register regions
> dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions
> dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions
> dt-bindings: dma: ti: k3-udma: Describe cfg register regions
> dmaengine: ti: k3-udma: Add PSIL threads for AM62P and J722S
>
> Vinod Koul (2):
> dmaengine: xilinx: xdma: Workaround truncation compilation error
> dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
>
> .../devicetree/bindings/dma/dma-controller.yaml | 15 -
> .../devicetree/bindings/dma/dma-router.yaml | 11 -
> .../bindings/dma/loongson,ls2x-apbdma.yaml | 62 ++
> .../bindings/dma/nvidia,tegra210-adma.yaml | 3 +
> .../devicetree/bindings/dma/qcom,gpi.yaml | 2 +
> .../devicetree/bindings/dma/renesas,rz-dmac.yaml | 2 +-
> .../bindings/dma/sifive,fu540-c000-pdma.yaml | 1 +
> .../devicetree/bindings/dma/ti/k3-bcdma.yaml | 39 +-
> .../devicetree/bindings/dma/ti/k3-pktdma.yaml | 26 +-
> .../devicetree/bindings/dma/ti/k3-udma.yaml | 20 +-
> MAINTAINERS | 7 +
> drivers/dma/Kconfig | 14 +
> drivers/dma/Makefile | 1 +
> drivers/dma/apple-admac.c | 5 +-
> drivers/dma/dma-axi-dmac.c | 286 ++++++---
> drivers/dma/dmaengine.c | 3 +
> drivers/dma/dmatest.c | 17 +-
> drivers/dma/fsl-edma-main.c | 17 +-
> drivers/dma/idxd/cdev.c | 4 +-
> drivers/dma/idxd/device.c | 9 +-
> drivers/dma/ls2x-apb-dma.c | 705 +++++++++++++++++++++
> drivers/dma/milbeaut-hdmac.c | 17 +-
> drivers/dma/milbeaut-xdmac.c | 17 +-
> drivers/dma/pl330.c | 3 +
> drivers/dma/sf-pdma/sf-pdma.c | 44 +-
> drivers/dma/sf-pdma/sf-pdma.h | 8 +-
> drivers/dma/ste_dma40.c | 12 +-
> drivers/dma/tegra210-adma.c | 35 +-
> drivers/dma/ti/Makefile | 3 +-
> drivers/dma/ti/k3-psil-am62p.c | 325 ++++++++++
> drivers/dma/ti/k3-psil-priv.h | 1 +
> drivers/dma/ti/k3-psil.c | 2 +
> drivers/dma/ti/k3-udma.c | 2 +
> drivers/dma/uniphier-mdmac.c | 17 +-
> drivers/dma/uniphier-xdmac.c | 17 +-
> drivers/dma/xilinx/xdma-regs.h | 30 +-
> drivers/dma/xilinx/xdma.c | 350 +++++++---
> drivers/dma/xilinx/xilinx_dpdma.c | 2 +-
> include/dt-bindings/dma/fsl-edma.h | 21 +
> 39 files changed, 1870 insertions(+), 285 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
> create mode 100644 drivers/dma/ls2x-apb-dma.c
> create mode 100644 drivers/dma/ti/k3-psil-am62p.c
> create mode 100644 include/dt-bindings/dma/fsl-edma.h
> --
> ~Vinod
--
~Vinod
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-01-20 19:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 17:24 [GIT PULL]: dmaengine updates for v6.8 Vinod Koul
2024-01-18 19:11 ` Nathan Chancellor
2024-01-19 11:31 ` Vinod Koul
2024-01-20 19:37 ` Vinod Koul [this message]
2024-01-20 23:08 ` pr-tracker-bot
2024-01-20 23:08 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZawhDA2SlQAVNsFO@matsya \
--to=vkoul@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.