All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ian Ray <ian.ray@gehealthcare.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: sbabic@denx.de, ian.ray@ge.com, martyn.welch@collabora.com,
	u-boot@lists.denx.de, Fabio Estevam <festevam@denx.de>
Subject: Re: EXT: [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL
Date: Thu, 15 Feb 2024 14:05:18 +0200	[thread overview]
Message-ID: <Zc39_kXIbw0LsCvd@de2cfed78370> (raw)
In-Reply-To: <20240213114342.2728075-1-festevam@gmail.com>

On Tue, Feb 13, 2024 at 08:43:38AM -0300, Fabio Estevam wrote:
> 
> From: Fabio Estevam <festevam@denx.de>
> 
> The conversion to DM_SERIAL is mandatory, so do the conversion.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Reviewed-by: Ian Ray <ian.ray@gehealthcare.com> 

> ---
>  arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi | 8 ++++++++
>  board/msc/sm2s_imx8mp/spl.c              | 9 ---------
>  configs/msc_sm2s_imx8mp_defconfig        | 1 +
>  include/configs/msc_sm2s_imx8mp.h        | 2 --
>  4 files changed, 9 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> index c398a743f7..1a7b530d9f 100644
> --- a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> @@ -63,3 +63,11 @@
>  &pmic {
>  	bootph-pre-ram;
>  };
> +
> +&uart2 {
> +	bootph-pre-ram;
> +};
> +
> +&pinctrl_uart2 {
> +	bootph-pre-ram;
> +};
> diff --git a/board/msc/sm2s_imx8mp/spl.c b/board/msc/sm2s_imx8mp/spl.c
> index fed0fbcba1..ed7a1b7d3d 100644
> --- a/board/msc/sm2s_imx8mp/spl.c
> +++ b/board/msc/sm2s_imx8mp/spl.c
> @@ -168,13 +168,6 @@ static const iomux_v3_cfg_t wdog_pads[] = {
>  	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
>  };
>  
> -#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
> -
> -static const iomux_v3_cfg_t ser0_pads[] = {
> -	MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> -	MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> -};
> -
>  int board_early_init_f(void)
>  {
>  	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> @@ -182,8 +175,6 @@ int board_early_init_f(void)
>  	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
>  	set_wdog_reset(wdog);
>  
> -	imx_iomux_v3_setup_multiple_pads(ser0_pads, ARRAY_SIZE(ser0_pads));
> -
>  	return 0;
>  }
>  
> diff --git a/configs/msc_sm2s_imx8mp_defconfig b/configs/msc_sm2s_imx8mp_defconfig
> index bf1052db6f..9c27a72f8a 100644
> --- a/configs/msc_sm2s_imx8mp_defconfig
> +++ b/configs/msc_sm2s_imx8mp_defconfig
> @@ -97,6 +97,7 @@ CONFIG_SPL_PMIC_RN5T567=y
>  CONFIG_DM_REGULATOR=y
>  CONFIG_DM_REGULATOR_FIXED=y
>  CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_SERIAL=y
>  CONFIG_MXC_UART=y
>  CONFIG_SYSRESET=y
>  CONFIG_SPL_SYSRESET=y
> diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h
> index c1c1fd5a78..3c7d96cb3c 100644
> --- a/include/configs/msc_sm2s_imx8mp.h
> +++ b/include/configs/msc_sm2s_imx8mp.h
> @@ -55,8 +55,6 @@
>  #define PHYS_SDRAM_2			0xc0000000
>  #define PHYS_SDRAM_2_SIZE		0x0
>  
> -#define CFG_MXC_UART_BASE		UART2_BASE_ADDR
> -
>  #define CFG_SYS_FSL_USDHC_NUM	2
>  #define CFG_SYS_FSL_ESDHC_ADDR	0
>  
> -- 
> 2.34.1
> 
> 

  parent reply	other threads:[~2024-02-15 13:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-13 11:43 [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL Fabio Estevam
2024-02-13 11:43 ` [PATCH 2/5] msc_sm2s_imx8mp: Make Ethernet functional Fabio Estevam
2024-02-15 12:05   ` EXT: " Ian Ray
2024-02-13 11:43 ` [PATCH 3/5] imx8mp-msc-sm2s: Add mmc aliases Fabio Estevam
2024-02-15 12:05   ` EXT: " Ian Ray
2024-02-13 11:43 ` [PATCH 4/5] msc_sm2s_imx8mp: Add redundant environment support Fabio Estevam
2024-02-15 12:05   ` EXT: " Ian Ray
2024-02-13 11:43 ` [PATCH 5/5] msc_sm2s_imx8mp: Fix CONFIG_DEFAULT_FDT_FILE Fabio Estevam
2024-02-15 12:06   ` EXT: " Ian Ray
2024-02-15 12:05 ` Ian Ray [this message]
2024-02-19 13:15   ` EXT: [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zc39_kXIbw0LsCvd@de2cfed78370 \
    --to=ian.ray@gehealthcare.com \
    --cc=festevam@denx.de \
    --cc=festevam@gmail.com \
    --cc=ian.ray@ge.com \
    --cc=martyn.welch@collabora.com \
    --cc=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.