All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Nuno Sa <nuno.sa@analog.com>
Cc: dmaengine@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH] dmaengine: axi-dmac: move to device managed probe
Date: Fri, 16 Feb 2024 17:52:00 +0530	[thread overview]
Message-ID: <Zc9TaGFInAQA-Zik@matsya> (raw)
In-Reply-To: <20240214-axi-dmac-devm-probe-v1-1-22d633da19cb@analog.com>

On 14-02-24, 13:29, Nuno Sa wrote:
> In axi_dmac_probe(), there's a mix in using device managed APIs and
> explicitly cleaning things in the driver .remove() hook. Move to use
> device managed APIs and thus drop the .remove() hook.
> 
> While doing this move request_irq() before of_dma_controller_register()
> so the previous cleanup order in the .remove() hook is preserved.

It is good that we are doing this, but moving irq to devm doesnt help a
lot, there exists a race

I would suggest you use the axi_dmac_free_dma_controller() to all free
up irq explicitly, that will ensure things no chance of irq firing and
scheduling tasklet when we are removing

> 
> Signed-off-by: Nuno Sa <nuno.sa@analog.com>
> ---
>  drivers/dma/dma-axi-dmac.c | 80 ++++++++++++++++++++--------------------------
>  1 file changed, 35 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
> index 4e339c04fc1e..24c911dc3161 100644
> --- a/drivers/dma/dma-axi-dmac.c
> +++ b/drivers/dma/dma-axi-dmac.c
> @@ -1002,6 +1002,16 @@ static int axi_dmac_detect_caps(struct axi_dmac *dmac, unsigned int version)
>  	return 0;
>  }
>  
> +static void axi_dmac_tasklet_kill(void *task)
> +{
> +	tasklet_kill(task);
> +}
> +
> +static void axi_dmac_free_dma_controller(void *of_node)
> +{
> +	of_dma_controller_free(of_node);
> +}
> +
>  static int axi_dmac_probe(struct platform_device *pdev)
>  {
>  	struct dma_device *dma_dev;
> @@ -1025,14 +1035,10 @@ static int axi_dmac_probe(struct platform_device *pdev)
>  	if (IS_ERR(dmac->base))
>  		return PTR_ERR(dmac->base);
>  
> -	dmac->clk = devm_clk_get(&pdev->dev, NULL);
> +	dmac->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>  	if (IS_ERR(dmac->clk))
>  		return PTR_ERR(dmac->clk);
>  
> -	ret = clk_prepare_enable(dmac->clk);
> -	if (ret < 0)
> -		return ret;
> -
>  	version = axi_dmac_read(dmac, ADI_AXI_REG_VERSION);
>  
>  	if (version >= ADI_AXI_PCORE_VER(4, 3, 'a'))
> @@ -1041,7 +1047,7 @@ static int axi_dmac_probe(struct platform_device *pdev)
>  		ret = axi_dmac_parse_dt(&pdev->dev, dmac);
>  
>  	if (ret < 0)
> -		goto err_clk_disable;
> +		return ret;
>  
>  	INIT_LIST_HEAD(&dmac->chan.active_descs);
>  
> @@ -1072,7 +1078,7 @@ static int axi_dmac_probe(struct platform_device *pdev)
>  
>  	ret = axi_dmac_detect_caps(dmac, version);
>  	if (ret)
> -		goto err_clk_disable;
> +		return ret;
>  
>  	dma_dev->copy_align = (dmac->chan.address_align_mask + 1);
>  
> @@ -1088,57 +1094,42 @@ static int axi_dmac_probe(struct platform_device *pdev)
>  		    !AXI_DMAC_DST_COHERENT_GET(ret)) {
>  			dev_err(dmac->dma_dev.dev,
>  				"Coherent DMA not supported in hardware");
> -			ret = -EINVAL;
> -			goto err_clk_disable;
> +			return -EINVAL;
>  		}
>  	}
>  
> -	ret = dma_async_device_register(dma_dev);
> +	ret = dmaenginem_async_device_register(dma_dev);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Put the action in here so it get's done before unregistering the DMA
> +	 * device.
> +	 */
> +	ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_tasklet_kill,
> +				       &dmac->chan.vchan.task);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_request_irq(&pdev->dev, dmac->irq, axi_dmac_interrupt_handler,
> +			       IRQF_SHARED, dev_name(&pdev->dev), dmac);
>  	if (ret)
> -		goto err_clk_disable;
> +		return ret;
>  
>  	ret = of_dma_controller_register(pdev->dev.of_node,
>  		of_dma_xlate_by_chan_id, dma_dev);
>  	if (ret)
> -		goto err_unregister_device;
> +		return ret;
>  
> -	ret = request_irq(dmac->irq, axi_dmac_interrupt_handler, IRQF_SHARED,
> -		dev_name(&pdev->dev), dmac);
> +	ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_free_dma_controller,
> +				       pdev->dev.of_node);
>  	if (ret)
> -		goto err_unregister_of;
> -
> -	platform_set_drvdata(pdev, dmac);
> +		return ret;
>  
>  	regmap = devm_regmap_init_mmio(&pdev->dev, dmac->base,
>  		 &axi_dmac_regmap_config);
> -	if (IS_ERR(regmap)) {
> -		ret = PTR_ERR(regmap);
> -		goto err_free_irq;
> -	}
> -
> -	return 0;
> -
> -err_free_irq:
> -	free_irq(dmac->irq, dmac);
> -err_unregister_of:
> -	of_dma_controller_free(pdev->dev.of_node);
> -err_unregister_device:
> -	dma_async_device_unregister(&dmac->dma_dev);
> -err_clk_disable:
> -	clk_disable_unprepare(dmac->clk);
> -
> -	return ret;
> -}
> -
> -static void axi_dmac_remove(struct platform_device *pdev)
> -{
> -	struct axi_dmac *dmac = platform_get_drvdata(pdev);
>  
> -	of_dma_controller_free(pdev->dev.of_node);
> -	free_irq(dmac->irq, dmac);
> -	tasklet_kill(&dmac->chan.vchan.task);
> -	dma_async_device_unregister(&dmac->dma_dev);
> -	clk_disable_unprepare(dmac->clk);
> +	return PTR_ERR_OR_ZERO(regmap);
>  }
>  
>  static const struct of_device_id axi_dmac_of_match_table[] = {
> @@ -1153,7 +1144,6 @@ static struct platform_driver axi_dmac_driver = {
>  		.of_match_table = axi_dmac_of_match_table,
>  	},
>  	.probe = axi_dmac_probe,
> -	.remove_new = axi_dmac_remove,
>  };
>  module_platform_driver(axi_dmac_driver);
>  
> 
> ---
> base-commit: de7d9cb3b064fdfb2e0e7706d14ffee20b762ad2
> change-id: 20240214-axi-dmac-devm-probe-d718ef36fb58
> --
> 
> Thanks!
> - Nuno Sá

-- 
~Vinod

  reply	other threads:[~2024-02-16 12:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-14 12:29 [PATCH] dmaengine: axi-dmac: move to device managed probe Nuno Sa
2024-02-16 12:22 ` Vinod Koul [this message]
2024-02-16 13:01   ` Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zc9TaGFInAQA-Zik@matsya \
    --to=vkoul@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=lars@metafoo.de \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.