From: Oliver Upton <oliver.upton@linux.dev>
To: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>,
kvmarm@lists.linux.dev, kvm@vger.kernel.org,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 04/10] KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
Date: Sun, 18 Feb 2024 10:05:37 -0800 [thread overview]
Message-ID: <ZdJG8W-TLW8I6O07@linux.dev> (raw)
In-Reply-To: <86frxq3w3g.wl-maz@kernel.org>
On Sun, Feb 18, 2024 at 10:28:19AM +0000, Marc Zyngier wrote:
> On Sun, 18 Feb 2024 08:46:53 +0000,
> Zenghui Yu <yuzenghui@huawei.com> wrote:
> >
> > On 2024/2/17 2:41, Oliver Upton wrote:
> > > Start iterating the LPI xarray in anticipation of removing the LPI
> > > linked-list.
> > >
> > > Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
> > > ---
> > > arch/arm64/kvm/vgic/vgic-its.c | 7 ++++++-
> > > 1 file changed, 6 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
> > > index fb2d3c356984..9ce2edfadd11 100644
> > > --- a/arch/arm64/kvm/vgic/vgic-its.c
> > > +++ b/arch/arm64/kvm/vgic/vgic-its.c
> > > @@ -335,6 +335,7 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
> > > int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
> > > {
> > > struct vgic_dist *dist = &kvm->arch.vgic;
> > > + XA_STATE(xas, &dist->lpi_xa, GIC_LPI_OFFSET);
> > > struct vgic_irq *irq;
> > > unsigned long flags;
> > > u32 *intids;
> > > @@ -353,7 +354,9 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
> > > return -ENOMEM;
> > > raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
> > > - list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
> > > + rcu_read_lock();
> > > +
> > > + xas_for_each(&xas, irq, INTERRUPT_ID_BITS_ITS) {
> >
> > We should use '1 << INTERRUPT_ID_BITS_ITS - 1' to represent the maximum
> > LPI interrupt ID.
/facepalm
Thanks Zenghui!
> Huh, well caught! I'm not even sure how it works, as that's way
> smaller than the start of the walk (8192). Probably doesn't.
>
> An alternative would be to use max_lpis_propbaser(), but I'm not sure
> we always have a valid PROPBASER value set when we start using this
> function. Worth investigating though.
Given the plans to eventually replace this with xarray marks, I'd vote
for doing the lazy thing and deciding this at compile time.
I can squash this in when I apply the series if the rest of it isn't
offensive, otherwise respin with the change.
--
Thanks,
Oliver
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index d84cb7618c59..f6025886071c 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -316,6 +316,8 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
return 0;
}
+#define GIC_LPI_MAX_INTID ((1 << INTERRUPT_ID_BITS_ITS) - 1)
+
/*
* Create a snapshot of the current LPIs targeting @vcpu, so that we can
* enumerate those LPIs without holding any lock.
@@ -345,7 +347,7 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
rcu_read_lock();
- xas_for_each(&xas, irq, INTERRUPT_ID_BITS_ITS) {
+ xas_for_each(&xas, irq, GIC_LPI_MAX_INTID) {
if (i == irq_count)
break;
/* We don't need to "get" the IRQ, as we hold the list lock. */
next prev parent reply other threads:[~2024-02-18 18:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 18:41 [PATCH v3 00/10] KVM: arm64: Avoid serializing LPI get() / put() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 01/10] KVM: arm64: vgic: Store LPIs in an xarray Oliver Upton
2024-02-20 16:30 ` Zenghui Yu
2024-02-20 17:15 ` Oliver Upton
2024-02-21 5:11 ` Zenghui Yu
2024-02-21 5:13 ` Oliver Upton
2024-02-20 17:24 ` Marc Zyngier
2024-02-20 17:43 ` Oliver Upton
2024-02-20 17:53 ` Marc Zyngier
2024-02-20 17:57 ` Oliver Upton
2024-02-16 18:41 ` [PATCH v3 02/10] KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 03/10] KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs Oliver Upton
2024-02-16 18:41 ` [PATCH v3 04/10] KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list() Oliver Upton
2024-02-18 8:46 ` Zenghui Yu
2024-02-18 10:28 ` Marc Zyngier
2024-02-18 18:05 ` Oliver Upton [this message]
2024-02-16 18:41 ` [PATCH v3 05/10] KVM: arm64: vgic: Get rid of the LPI linked-list Oliver Upton
2024-02-16 18:41 ` [PATCH v3 06/10] KVM: arm64: vgic: Use atomics to count LPIs Oliver Upton
2024-02-16 18:41 ` [PATCH v3 07/10] KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner Oliver Upton
2024-02-16 18:41 ` [PATCH v3 08/10] KVM: arm64: vgic: Rely on RCU protection in vgic_get_lpi() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 09/10] KVM: arm64: vgic: Ensure the irq refcount is nonzero when taking a ref Oliver Upton
2024-02-16 18:41 ` [PATCH v3 10/10] KVM: arm64: vgic: Don't acquire the lpi_list_lock in vgic_put_irq() Oliver Upton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdJG8W-TLW8I6O07@linux.dev \
--to=oliver.upton@linux.dev \
--cc=james.morse@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.