All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <intel-gfx@lists.freedesktop.org>,
	<dri-devel@lists.freedesktop.org>,
	"Jani Nikula" <jani.nikula@linux.intel.com>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Tvrtko Ursulin <tursulin@ursulin.net>,
	Ashutosh Dixit <ashutosh.dixit@intel.com>,
	Anshuman Gupta <anshuman.gupta@intel.com>,
	Badal Nilawar <badal.nilawar@intel.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	Dale B Stimson <dale.b.stimson@intel.com>,
	"Andi Shyti" <andi.shyti@linux.intel.com>,
	Jonathan Cavitt <jonathan.cavitt@intel.com>,
	Nirmoy Das <nirmoy.das@intel.com>
Subject: Re: [PATCH] drm/i915/hwmon: Fix locking inversion in sysfs getter
Date: Mon, 11 Mar 2024 12:58:24 -0400	[thread overview]
Message-ID: <Ze84MKyzFzTRq_Fm@intel.com> (raw)
In-Reply-To: <20240311080717.421152-2-janusz.krzysztofik@linux.intel.com>

On Mon, Mar 11, 2024 at 09:06:46AM +0100, Janusz Krzysztofik wrote:
> In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an
> rpm wakeref.  That results in lock inversion:
> 
> <4> [197.079335] ======================================================
> <4> [197.085473] WARNING: possible circular locking dependency detected
> <4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted
> <4> [197.098096] ------------------------------------------------------
> <4> [197.104231] prometheus-node/839 is trying to acquire lock:
> <4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350
> <4> [197.116939]
> but task is already holding lock:
> <4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915]
> <4> [197.131543]
> which lock already depends on the new lock.
> ...
> <4> [197.507922] Chain exists of:
>   fs_reclaim --> &gt->reset.mutex --> &hwmon->hwmon_lock
> <4> [197.518528]  Possible unsafe locking scenario:
> <4> [197.524411]        CPU0                    CPU1
> <4> [197.528916]        ----                    ----
> <4> [197.533418]   lock(&hwmon->hwmon_lock);
> <4> [197.537237]                                lock(&gt->reset.mutex);
> <4> [197.543376]                                lock(&hwmon->hwmon_lock);
> <4> [197.549682]   lock(fs_reclaim);
> ...
> <4> [197.632548] Call Trace:
> <4> [197.634990]  <TASK>
> <4> [197.637088]  dump_stack_lvl+0x64/0xb0
> <4> [197.640738]  check_noncircular+0x15e/0x180
> <4> [197.652968]  check_prev_add+0xe9/0xce0
> <4> [197.656705]  __lock_acquire+0x179f/0x2300
> <4> [197.660694]  lock_acquire+0xd8/0x2d0
> <4> [197.673009]  fs_reclaim_acquire+0xa1/0xd0
> <4> [197.680478]  __kmalloc+0x9a/0x350
> <4> [197.689063]  acpi_ns_internalize_name.part.0+0x4a/0xb0
> <4> [197.694170]  acpi_ns_get_node_unlocked+0x60/0xf0
> <4> [197.720608]  acpi_ns_get_node+0x3b/0x60
> <4> [197.724428]  acpi_get_handle+0x57/0xb0
> <4> [197.728164]  acpi_has_method+0x20/0x50
> <4> [197.731896]  acpi_pci_set_power_state+0x43/0x120
> <4> [197.736485]  pci_power_up+0x24/0x1c0
> <4> [197.740047]  pci_pm_default_resume_early+0x9/0x30
> <4> [197.744725]  pci_pm_runtime_resume+0x2d/0x90
> <4> [197.753911]  __rpm_callback+0x3c/0x110
> <4> [197.762586]  rpm_callback+0x58/0x70
> <4> [197.766064]  rpm_resume+0x51e/0x730
> <4> [197.769542]  rpm_resume+0x267/0x730
> <4> [197.773020]  rpm_resume+0x267/0x730
> <4> [197.776498]  rpm_resume+0x267/0x730
> <4> [197.779974]  __pm_runtime_resume+0x49/0x90
> <4> [197.784055]  __intel_runtime_pm_get+0x19/0xa0 [i915]
> <4> [197.789070]  hwm_energy+0x55/0x100 [i915]
> <4> [197.793183]  hwm_read+0x9a/0x310 [i915]
> <4> [197.797124]  hwmon_attr_show+0x36/0x120
> <4> [197.800946]  dev_attr_show+0x15/0x60
> <4> [197.804509]  sysfs_kf_seq_show+0xb5/0x100
> 
> However, the lock is only intended to protect either a hwmon overflow
> counter or rmw hardware operations.  There is no need to hold the lock,
> only the wakeref, while reading from hardware.
> 
> Acquire the lock after hardware read under rpm wakeref.
> 
> Fixes: c41b8bdcc297 ("drm/i915/hwmon: Show device level energy usage")
> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
> Cc: <stable@vger.kernel.org> # v6.2+
> ---
>  drivers/gpu/drm/i915/i915_hwmon.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 8c3f443c8347e..faf7670de6e06 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -136,11 +136,11 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>  	else
>  		rgaddr = hwmon->rg.energy_status_all;
>  
> -	mutex_lock(&hwmon->hwmon_lock);
> -
>  	with_intel_runtime_pm(uncore->rpm, wakeref)
>  		reg_val = intel_uncore_read(uncore, rgaddr);
>  
> +	mutex_lock(&hwmon->hwmon_lock);
> +

This is not enough.
check hwm_locked_with_pm_intel_uncore_rmw()

It looks like we need to rethink this lock entirely here.


struct mutex hwmon_lock;                /* counter overflow \
logic and rmw */

do we really need to protect the rmw?

This also shows me that we have other places with intel_uncore_rmw
without the with runtime_pm.

perhaps we need to stop using the with_rpm macro and use explicit
rpm calls before the hwmon_locks before the rmw?

perhaps we need a more granular lock?

notice that I'm just brainstorming/thinking out loud... someone need
to go there an run an deeper analisys on this lock and rpm calls
on hwmon.

>  	if (reg_val >= ei->reg_val_prev)
>  		ei->accum_energy += reg_val - ei->reg_val_prev;
>  	else
> -- 
> 2.43.0
> 

  reply	other threads:[~2024-03-11 16:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-11  8:06 [PATCH] drm/i915/hwmon: Fix locking inversion in sysfs getter Janusz Krzysztofik
2024-03-11 16:58 ` Rodrigo Vivi [this message]
2024-03-11 17:35   ` Guenter Roeck
2024-03-11 18:14     ` Janusz Krzysztofik
2024-03-11 18:41       ` Rodrigo Vivi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Ze84MKyzFzTRq_Fm@intel.com \
    --to=rodrigo.vivi@intel.com \
    --cc=andi.shyti@linux.intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=ashutosh.dixit@intel.com \
    --cc=badal.nilawar@intel.com \
    --cc=dale.b.stimson@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=janusz.krzysztofik@linux.intel.com \
    --cc=jonathan.cavitt@intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=linux@roeck-us.net \
    --cc=nirmoy.das@intel.com \
    --cc=tursulin@ursulin.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.