Re: [PATCH] clk: qcom: dispcc-x1e80100: Drop the reconfiguring of PLL0 on probe

[Abel Vesa <abel.vesa@linaro.org>]

On 24-04-18 13:51:22, Abel Vesa wrote:
> Currently, PLL0 is configured by the bootloader is the parent of the
> mdp_clk_src. Reconfiguring it on probe leaves the PLL0 in "stand-by"
> state (unlocked), which will trigger RCG child clocks to not update
> their config, which then breaks eDP on all x1e80100 boards. So rely
> on the bootloader for now. Drop the config values as well. Also add
> a comment to explain why the PLL0 is not configured alongside PLL1.
> 
> Fixes: ee3f0739035f ("clk: qcom: Add dispcc clock driver for x1e80100")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Ignore this one. Sent a separate patch that handles this in another way:
https://lore.kernel.org/all/20240418-clk-qcom-lucid-evo-skip-configuring-enabled-v1-1-caede5f1c7a3@linaro.org/

>  drivers/clk/qcom/dispcc-x1e80100.c | 16 +---------------
>  1 file changed, 1 insertion(+), 15 deletions(-)
> 
> diff --git a/drivers/clk/qcom/dispcc-x1e80100.c b/drivers/clk/qcom/dispcc-x1e80100.c
> index 0b2ee6456762..525f645094a8 100644
> --- a/drivers/clk/qcom/dispcc-x1e80100.c
> +++ b/drivers/clk/qcom/dispcc-x1e80100.c
> @@ -73,20 +73,6 @@ static const struct pll_vco lucid_ole_vco[] = {
>  	{ 249600000, 2300000000, 0 },
>  };
>  
> -static const struct alpha_pll_config disp_cc_pll0_config = {
> -	.l = 0xd,
> -	.alpha = 0x6492,
> -	.config_ctl_val = 0x20485699,
> -	.config_ctl_hi_val = 0x00182261,
> -	.config_ctl_hi1_val = 0x82aa299c,
> -	.test_ctl_val = 0x00000000,
> -	.test_ctl_hi_val = 0x00000003,
> -	.test_ctl_hi1_val = 0x00009000,
> -	.test_ctl_hi2_val = 0x00000034,
> -	.user_ctl_val = 0x00000000,
> -	.user_ctl_hi_val = 0x00000005,
> -};
> -
>  static struct clk_alpha_pll disp_cc_pll0 = {
>  	.offset = 0x0,
>  	.vco_table = lucid_ole_vco,
> @@ -1670,7 +1656,7 @@ static int disp_cc_x1e80100_probe(struct platform_device *pdev)
>  		goto err_put_rpm;
>  	}
>  
> -	clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
> +	/* Configure only PLL1. PLL0 is already configured by bootloader */
>  	clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
>  
>  	/* Enable clock gating for MDP clocks */
> 
> ---
> base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
> change-id: 20240418-x1e80100-dispcc-drop-pll0-reconfigure-0111b338c838
> 
> Best regards,
> -- 
> Abel Vesa <abel.vesa@linaro.org>
>