From: "Roger Pau Monné" <roger.pau@citrix.com>
To: Jan Beulich <jbeulich@suse.com>
Cc: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>,
Kevin Tian <kevin.tian@intel.com>, Paul Durrant <paul@xen.org>
Subject: Re: [PATCH v2 01/12] VT-d: correct ATS checking for root complex integrated devices
Date: Fri, 3 May 2024 16:01:27 +0200 [thread overview]
Message-ID: <ZjTuN8Ydh0pVCoNZ@macbook> (raw)
In-Reply-To: <3686dae7-e005-47b5-9235-14208a68eec5@suse.com>
On Thu, Feb 15, 2024 at 11:13:24AM +0100, Jan Beulich wrote:
> Spec version 4.1 says
>
> "The ATSR structures identifies PCI Express Root-Ports supporting
> Address Translation Services (ATS) transactions. Software must enable
> ATS on endpoint devices behind a Root Port only if the Root Port is
> reported as supporting ATS transactions."
>
> Clearly root complex integrated devices aren't "behind root ports",
> matching my observation on a SapphireRapids system having an ATS-
> capable root complex integrated device. Hence for such devices we
> shouldn't try to locate a corresponding ATSR.
>
> Since both pci_find_ext_capability() and pci_find_cap_offset() return
> "unsigned int", change "pos" to that type at the same time.
>
> Fixes: 903b93211f56 ("[VTD] laying the ground work for ATS")
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
> ---
> v2: New.
>
> --- a/xen/drivers/passthrough/vtd/x86/ats.c
> +++ b/xen/drivers/passthrough/vtd/x86/ats.c
> @@ -44,7 +44,7 @@ struct acpi_drhd_unit *find_ats_dev_drhd
> int ats_device(const struct pci_dev *pdev, const struct acpi_drhd_unit *drhd)
> {
> struct acpi_drhd_unit *ats_drhd;
> - int pos;
> + unsigned int pos, expfl = 0;
>
> if ( !ats_enabled || !iommu_qinval )
> return 0;
> @@ -53,7 +53,12 @@ int ats_device(const struct pci_dev *pde
> !ecap_dev_iotlb(drhd->iommu->ecap) )
> return 0;
>
> - if ( !acpi_find_matched_atsr_unit(pdev) )
> + pos = pci_find_cap_offset(pdev->sbdf, PCI_CAP_ID_EXP);
> + if ( pos )
> + expfl = pci_conf_read16(pdev->sbdf, pos + PCI_EXP_FLAGS);
> +
> + if ( MASK_EXTR(expfl, PCI_EXP_FLAGS_TYPE) != PCI_EXP_TYPE_RC_END &&
> + !acpi_find_matched_atsr_unit(pdev) )
Given the spec quote above, it might also be helpful to check that the
type is PCI_EXP_TYPE_ENDPOINT before attempting the ATSR check?
I would assume a well formed ATSR won't list non-endpoint devices.
Thanks, Roger.
next prev parent reply other threads:[~2024-05-03 14:01 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 10:11 [PATCH v2 00/12] VT-d: SATC handling; ATS: tidying Jan Beulich
2024-02-15 10:13 ` [PATCH v2 01/12] VT-d: correct ATS checking for root complex integrated devices Jan Beulich
2024-05-03 14:01 ` Roger Pau Monné [this message]
2024-02-15 10:14 ` [PATCH v2 02/12] VT-d: tidy error handling of RMRR parsing Jan Beulich
2024-05-06 9:12 ` Roger Pau Monné
2024-05-06 9:21 ` Jan Beulich
2024-05-06 9:26 ` Roger Pau Monné
2024-02-15 10:14 ` [PATCH v2 03/12] VT-d: parse ACPI "SoC Integrated Address Translation Cache Reporting Structure"s Jan Beulich
2024-05-06 10:29 ` Roger Pau Monné
2024-05-06 11:01 ` Jan Beulich
2024-05-06 11:09 ` Roger Pau Monné
2024-02-15 10:15 ` [PATCH v2 04/12] AMD/IOMMU: add helper to check whether ATS is to be used for a device Jan Beulich
2024-05-06 11:27 ` Roger Pau Monné
2024-02-15 10:15 ` [PATCH v2 05/12] IOMMU: rename and re-type ats_enabled Jan Beulich
2024-02-15 10:21 ` Jan Beulich
2024-05-06 12:42 ` Roger Pau Monné
2024-05-06 13:20 ` Jan Beulich
2024-05-06 13:53 ` Roger Pau Monné
2024-05-15 10:07 ` Jan Beulich
2024-05-20 10:29 ` Roger Pau Monné
2024-05-21 6:21 ` Jan Beulich
2024-05-21 10:03 ` Roger Pau Monné
2024-05-21 10:23 ` Jan Beulich
2024-02-15 10:16 ` [PATCH v2 06/12] VT-d: respect ACPI SATC's ATC_REQUIRED flag Jan Beulich
2024-05-06 13:38 ` Roger Pau Monné
2024-05-15 10:42 ` Jan Beulich
2024-05-20 11:36 ` Roger Pau Monné
2024-05-21 6:25 ` Jan Beulich
2025-10-23 13:30 ` Teddy Astie
2025-10-27 11:23 ` Jan Beulich
2024-02-15 10:16 ` [PATCH v2 07/12] VT-d: replace find_ats_dev_drhd() Jan Beulich
2024-02-15 10:17 ` [PATCH v2 08/12] VT-d: move ats_device() to the sole file it's used from Jan Beulich
2024-02-15 10:18 ` [PATCH v2 09/12] VT-d: move dev_invalidate_iotlb() " Jan Beulich
2024-02-15 10:18 ` [PATCH v2 10/12] VT-d: move {,un}map_vtd_domain_page() Jan Beulich
2024-02-15 10:18 ` [PATCH v2 11/12] VT-d: drop flush_dev_iotlb parameter from IOTLB flush hook Jan Beulich
2024-05-06 14:06 ` Roger Pau Monné
2024-02-15 10:19 ` [PATCH v2 12/12] PCI/ATS: tidy {en,dis}able_ats_device() a little Jan Beulich
2024-05-06 14:10 ` Roger Pau Monné
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZjTuN8Ydh0pVCoNZ@macbook \
--to=roger.pau@citrix.com \
--cc=jbeulich@suse.com \
--cc=kevin.tian@intel.com \
--cc=paul@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.