Re: [PATCH net-next v12 09/15] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Sat, May 04, 2024 at 12:01:42AM +0300, Serge Semin wrote:
> Absolutely correct. Moreover AFAICS from the databooks the PCS module
> is only available for the DW GMACs with the TBI, RTBI and SGMII
> interfaces. So the STMMAC_PCS_RGMII PCS flag seems misleading. The only
> info about the link state that could be runtime detected on the MAC
> side is: link speed, duplex mode and link status. It's done by means
> of the RGMII in-band status signals. That's what is implemented in the
> dwmac1000_rgsmii() method.

... which you've now made me look at, look at the whole
pcs_link/pcs_speed/pcs_duplex and made me wonder why the hell stmmac
is making this so figgin difficult, messing with the carrier behind
phylink's back (which is a no-no), and why it needs to have separate
paths for this.

It doesn't.

Just because it doesn't have something called an official "PCS" does
not mean you _can't_ use a phylink_pcs to represent something that
has PCS-like properties - such as the RGMII in-band status which is
no different to what Cisco SGMII does.

This isn't something new... this is something that mvneta has
supported since before phylink was a thing, and so phylink had to
allow it as well.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!