From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tor Krill <tor@excito.com>
Date: Thu, 10 Jul 2008 17:22:18 +0200 (CEST)
Subject: [U-Boot-Users] [PATCH 1/4][RFC] Add initial high speed support
	to USB code.
In-Reply-To: <873amhzsvu.fsf@denx.de>
Message-ID: <ZkSbahnn.1215703337.5731700.tor@localhost>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de




On 7/10/2008, "Markus Klotzb?cher" <mk@denx.de> wrote:

>Hi Tor,

Hi Markus,

>Tor Krill <tor@excito.com> writes:
>
>> Add high speed support to USB code. Extracted from Juniper Networks patch.
>>
>> I know that the mergewindow is closed but wanted to get feedback on these
>> patches if possible.
>
>Thanks again for fixing this up. AFAIK patches look fine, only two
> things:
>
>- please address the issues pointed out by Michael, especially removal
>  of the "C" macro.
>
>- Secondly it would be nice if we could have a short README.ehci or
>  similar which explains what works and what not, and what needs to be
>  done to add further board/HC support.
>
>Thank you in advance.

Thank you for reviewing. I will try fix things up and resubmit later.

Best Regards,

/Tor