From: Shawn Guo <shawnguo2@yeah.net>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2 2/2] arm64: dts: freescale: Support i.MX93 9x9 Quick Start Board
Date: Mon, 17 Jun 2024 10:22:17 +0800 [thread overview]
Message-ID: <Zm+d2ckRzTdaVARV@dragon> (raw)
In-Reply-To: <20240611033637.3521514-2-peng.fan@oss.nxp.com>
On Tue, Jun 11, 2024 at 11:36:37AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add the board device tree with sdhc1/2, cm33, mu, lpuart1, lpi2c1/2,
> usb enabled and etc, which to support the i.MX 93 quick start evaluation
> kit that provides a low-cost platform to evaluate the i.MX 93 applications
> processors in a 9x9mm package.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>
> V2:
> Drop non-sdio per Fabio
> Drop duplicated address-cells/size-cells under lpi2c
> The address/size under port still kept even there is warning when W=1, the
> warning is false alarm.
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/imx93-9x9-qsb.dts | 502 ++++++++++++++++++
> 2 files changed, 503 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 1b1e4db02071..2f7c5ca4ecf2 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> new file mode 100644
> index 000000000000..fe542c939de5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> @@ -0,0 +1,502 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/usb/pd.h>
> +#include "imx93.dtsi"
> +
> +/ {
> + model = "NXP i.MX93 9x9 Quick Start Board";
> + compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
> +
> + chosen {
> + stdout-path = &lpuart1;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + size = <0 0x10000000>;
> + linux,cma-default;
> + };
> +
> + vdev0vring0: vdev0vring0@a4000000 {
> + reg = <0 0xa4000000 0 0x8000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1@a4008000 {
> + reg = <0 0xa4008000 0 0x8000>;
> + no-map;
> + };
> +
> + vdev1vring0: vdev1vring0@a4010000 {
> + reg = <0 0xa4010000 0 0x8000>;
> + no-map;
> + };
> +
> + vdev1vring1: vdev1vring1@a4018000 {
> + reg = <0 0xa4018000 0 0x8000>;
> + no-map;
> + };
> +
> + rsc_table: rsc-table@2021e000 {
> + reg = <0 0x2021e000 0 0x1000>;
> + no-map;
> + };
> +
> + vdevbuffer: vdevbuffer@a4020000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0xa4020000 0 0x100000>;
> + no-map;
> + };
> +
> + };
> +
> + reg_vref_1v8: regulator-adc-vref {
> + compatible = "regulator-fixed";
> + regulator-name = "VREF_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + reg_rpi_3v3: regulator-rpi {
> + compatible = "regulator-fixed";
> + regulator-name = "VDD_RPI_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
Put enable-active-high here.
> + off-on-delay-us = <12000>;
> + enable-active-high;
> + };
> +};
> +
> +&adc1 {
> + vref-supply = <®_vref_1v8>;
> + status = "okay";
> +};
> +
> +&cm33 {
> + mbox-names = "tx", "rx", "rxdb";
> + mboxes = <&mu1 0 1>,
> + <&mu1 1 1>,
> + <&mu1 3 1>;
> + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
> + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
> + status = "okay";
> +};
> +
> +&eqos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy1>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <5000000>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + eee-broken-1000t;
> + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> + reset-deassert-us = <80000>;
> + realtek,clkout-disable;
> + };
> + };
> +};
> +
> +&lpi2c1 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpi2c1>;
> + status = "okay";
> +
> + ptn5110: tcpc@50 {
> + compatible = "nxp,ptn5110", "tcpci";
> + reg = <0x50>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + status = "okay";
Unneeded okay status.
> +
> + typec1_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + power-role = "dual";
> + data-role = "dual";
> + try-power-role = "sink";
> + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
> + PDO_VAR(5000, 20000, 3000)>;
> + op-sink-microwatt = <15000000>;
> + self-powered;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + typec1_dr_sw: endpoint {
> + remote-endpoint = <&usb1_drd_sw>;
> + };
> + };
> + };
> + };
> + };
> +
> + rtc@53 {
> + compatible = "nxp,pcf2131";
> + reg = <0x53>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + status = "okay";
Ditto
> + };
> +};
> +
> +&lpi2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpi2c2>;
> + status = "okay";
> +
> + pcal6524: gpio@22 {
> + compatible = "nxp,pcal6524";
> + reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcal6524>;
> + };
> +
> + pmic@25 {
> + compatible = "nxp,pca9451a";
> + reg = <0x25>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "BUCK1";
> + regulator-min-microvolt = <650000>;
> + regulator-max-microvolt = <2237500>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck2: BUCK2 {
> + regulator-name = "BUCK2";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <2187500>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck4: BUCK4{
> + regulator-name = "BUCK4";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5: BUCK5{
> + regulator-name = "BUCK5";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6: BUCK6 {
> + regulator-name = "BUCK6";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: LDO1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "LDO4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5: LDO5 {
> + regulator-name = "LDO5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&mu1 {
> + status = "okay";
> +};
> +
> +&mu2 {
> + status = "okay";
> +};
mu1, mu2 ...
> +
> +&lpuart1 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&mu1 {
> + status = "okay";
> +};
> +
> +&mu2 {
> + status = "okay";
> +};
... duplication?
> +
> +&usbotg1 {
> + dr_mode = "otg";
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> + usb-role-switch;
> + disable-over-current;
> + samsung,picophy-pre-emp-curr-control = <3>;
> + samsung,picophy-dc-vol-level-adjust = <7>;
> + status = "okay";
> +
> + port {
> + usb1_drd_sw: endpoint {
> + remote-endpoint = <&typec1_dr_sw>;
> + };
> + };
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + bus-width = <4>;
> + status = "okay";
> + no-mmc;
End property list with 'status'.
Shawn
> +};
> +
> +&wdog3 {
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_eqos: eqosgrp {
> + fsl,pins = <
> + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
> + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
> + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
> + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
> + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
> + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
> + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
> + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
> + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
> + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
> + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
> + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
> + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
> + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
> + >;
> + };
> +
> + pinctrl_lpi2c1: lpi2c1grp {
> + fsl,pins = <
> + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
> + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
> + >;
> + };
> +
> + pinctrl_lpi2c2: lpi2c2grp {
> + fsl,pins = <
> + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
> + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
> + >;
> + };
> +
> + pinctrl_pcal6524: pcal6524grp {
> + fsl,pins = <
> + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
> + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
> + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
> + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
> + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
> + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
> + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
> + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
> + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
> + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
> + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
> + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
> + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
> + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
> + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
> + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
> + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
> + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
> + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
> + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
> + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
> + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
> + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
> + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
> + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
> + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
> + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
> + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
> + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
> + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
> + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
> + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
> + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
> + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
> + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
> + >;
> + };
> +
> + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> + fsl,pins = <
> + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +};
> --
> 2.37.1
>
prev parent reply other threads:[~2024-06-17 2:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 3:36 [PATCH V2 1/2] dt-bindings: arm: fsl: add i.MX93 9x9 QSB board Peng Fan (OSS)
2024-06-11 3:36 ` Peng Fan (OSS)
2024-06-11 3:36 ` [PATCH V2 2/2] arm64: dts: freescale: Support i.MX93 9x9 Quick Start Board Peng Fan (OSS)
2024-06-11 3:36 ` Peng Fan (OSS)
2024-06-17 2:22 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zm+d2ckRzTdaVARV@dragon \
--to=shawnguo2@yeah.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.