All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brandon Maier via buildroot <buildroot@buildroot.org>
To: Neal Frager via buildroot <buildroot@buildroot.org>
Cc: ibai.erkiaga-elorza@amd.com, luca.ceresoli@bootlin.com,
	thomas.petazzoni@bootlin.com, Neal Frager <neal.frager@amd.com>,
	michal.simek@amd.com, yann.morin.1998@free.fr
Subject: Re: [Buildroot] [PATCH v12 3/3] configs/zynqmp*: build pmufw source
Date: Mon, 10 Jun 2024 14:44:16 +0000	[thread overview]
Message-ID: <ZmcRQPmxRccLFXnj@bspbox.kirk> (raw)
In-Reply-To: <20240607094705.1962913-3-neal.frager@amd.com>

Hi Neal,

On Fri, Jun 07, 2024 at 10:47:05AM +0100, Neal Frager via buildroot wrote:
> This patch migrates the zynqmp config files to use the new
> zynqmp-firmware package for building the zynqmp pmufw from source.
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>
> ---
> V4->V7:
>  - no changes
> V7->V8:
>  - bump to xilinx_v2023.2
> V8->V9:
>  - add the new zynqmp defconfigs
>  - add BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH definition
> V9->V10:
>  - no changes
> V10->V11:
>  - BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH is set by zynqmp-firmware
> V11->V12:
>  - BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH is set in each defconfig
> ---
>  configs/zynqmp_kria_kr260_defconfig | 6 +++++-
>  configs/zynqmp_kria_kv260_defconfig | 6 +++++-
>  configs/zynqmp_zcu102_defconfig     | 5 ++++-
>  configs/zynqmp_zcu104_defconfig     | 5 ++++-
>  configs/zynqmp_zcu106_defconfig     | 5 ++++-
>  5 files changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/configs/zynqmp_kria_kr260_defconfig b/configs/zynqmp_kria_kr260_defconfig
> index 3bf269ab6b..3f475af882 100644
> --- a/configs/zynqmp_kria_kr260_defconfig
> +++ b/configs/zynqmp_kria_kr260_defconfig
> @@ -31,10 +31,14 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/kr260-kria/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kr260/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TARGET_ZYNQMP_FIRMWARE_CUSTOM_CFLAGS="-DK26_SOM"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig
> index 7b402e032c..313b324a13 100644
> --- a/configs/zynqmp_kria_kv260_defconfig
> +++ b/configs/zynqmp_kria_kv260_defconfig
> @@ -31,10 +31,14 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/kv260-kria/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TARGET_ZYNQMP_FIRMWARE_CUSTOM_CFLAGS="-DK26_SOM"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig
> index f40002f6d9..302ad1394e 100644
> --- a/configs/zynqmp_zcu102_defconfig
> +++ b/configs/zynqmp_zcu102_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu102-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu104_defconfig b/configs/zynqmp_zcu104_defconfig
> index ef9c9bad49..059858fff6 100644
> --- a/configs/zynqmp_zcu104_defconfig
> +++ b/configs/zynqmp_zcu104_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu104-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu104/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
> index 07c595436f..39dd5c8ab3 100644
> --- a/configs/zynqmp_zcu106_defconfig
> +++ b/configs/zynqmp_zcu106_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu106-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> -- 
> 2.25.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
> 

Reviewed-by: Brandon Maier <brandon.maier@collins.com>

Thanks,
Brandon Maier
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2024-06-10 14:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-07  9:47 [Buildroot] [PATCH v12 1/3] boot/zynqmp-firmware: new boot firmware Neal Frager via buildroot
2024-06-07  9:47 ` [Buildroot] [PATCH v12 2/3] boot/uboot.mk: new zynqmp pmufw build option Neal Frager via buildroot
2024-06-10 14:42   ` Brandon Maier via buildroot
2024-06-07  9:47 ` [Buildroot] [PATCH v12 3/3] configs/zynqmp*: build pmufw source Neal Frager via buildroot
2024-06-10 14:44   ` Brandon Maier via buildroot [this message]
2024-06-07 10:04 ` [Buildroot] [PATCH v12 1/3] boot/zynqmp-firmware: new boot firmware Frager, Neal via buildroot
2024-06-07 11:22 ` Yann E. MORIN
2024-06-07 11:41   ` Frager, Neal via buildroot
2024-06-10 13:12 ` Brandon Maier via buildroot
2024-06-11  4:25   ` Frager, Neal via buildroot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZmcRQPmxRccLFXnj@bspbox.kirk \
    --to=buildroot@buildroot.org \
    --cc=brandon.maier@collins.com \
    --cc=ibai.erkiaga-elorza@amd.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=michal.simek@amd.com \
    --cc=neal.frager@amd.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=yann.morin.1998@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.