From: Roman Gushchin <roman.gushchin@linux.dev>
To: Waiman Long <longman@redhat.com>
Cc: "Tejun Heo" <tj@kernel.org>, "Zefan Li" <lizefan.x@bytedance.com>,
"Johannes Weiner" <hannes@cmpxchg.org>,
"Michal Koutný" <mkoutny@suse.com>,
"Jonathan Corbet" <corbet@lwn.net>,
cgroups@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Kamalesh Babulal" <kamalesh.babulal@oracle.com>
Subject: Re: [PATCH-cgroup v4] cgroup: Show # of subsystem CSSes in cgroup.stat
Date: Thu, 11 Jul 2024 03:26:11 +0000 [thread overview]
Message-ID: <Zo9Q063eF8CdVyR1@google.com> (raw)
In-Reply-To: <20240711025153.2356213-1-longman@redhat.com>
On Wed, Jul 10, 2024 at 10:51:53PM -0400, Waiman Long wrote:
> Cgroup subsystem state (CSS) is an abstraction in the cgroup layer to
> help manage different structures in various cgroup subsystems by being
> an embedded element inside a larger structure like cpuset or mem_cgroup.
>
> The /proc/cgroups file shows the number of cgroups for each of the
> subsystems. With cgroup v1, the number of CSSes is the same as the
> number of cgroups. That is not the case anymore with cgroup v2. The
> /proc/cgroups file cannot show the actual number of CSSes for the
> subsystems that are bound to cgroup v2.
>
> So if a v2 cgroup subsystem is leaking cgroups (usually memory cgroup),
> we can't tell by looking at /proc/cgroups which cgroup subsystems may
> be responsible.
>
> As cgroup v2 had deprecated the use of /proc/cgroups, the hierarchical
> cgroup.stat file is now being extended to show the number of live and
> dying CSSes associated with all the non-inhibited cgroup subsystems
> that have been bound to cgroup v2 as long as it is not zero. The number
> includes CSSes in the current cgroup as well as in all the descendants
> underneath it. This will help us pinpoint which subsystems are
> responsible for the increasing number of dying (nr_dying_descendants)
> cgroups.
>
> The cgroup-v2.rst file is updated to discuss this new behavior.
>
> With this patch applied, a sample output from root cgroup.stat file
> was shown below.
>
> nr_descendants 55
> nr_dying_descendants 35
> nr_subsys_cpuset 1
> nr_subsys_cpu 40
> nr_subsys_io 40
> nr_subsys_memory 55
> nr_dying_subsys_memory 35
> nr_subsys_perf_event 56
> nr_subsys_hugetlb 1
> nr_subsys_pids 55
> nr_subsys_rdma 1
> nr_subsys_misc 1
>
> Another sample output from system.slice/cgroup.stat was:
>
> nr_descendants 32
> nr_dying_descendants 33
> nr_subsys_cpu 30
> nr_subsys_io 30
> nr_subsys_memory 32
> nr_dying_subsys_memory 33
> nr_subsys_perf_event 33
> nr_subsys_pids 32
>
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
> Documentation/admin-guide/cgroup-v2.rst | 14 ++++++-
> include/linux/cgroup-defs.h | 7 ++++
> kernel/cgroup/cgroup.c | 52 ++++++++++++++++++++++++-
> 3 files changed, 70 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
> index 52763d6b2919..356cd430c888 100644
> --- a/Documentation/admin-guide/cgroup-v2.rst
> +++ b/Documentation/admin-guide/cgroup-v2.rst
> @@ -981,6 +981,16 @@ All cgroup core files are prefixed with "cgroup."
> A dying cgroup can consume system resources not exceeding
> limits, which were active at the moment of cgroup deletion.
>
> + nr_subsys_<cgroup_subsys>
> + Total number of live cgroups associated with that cgroup
> + subsystem (e.g. memory) at and beneath the current
> + cgroup. An entry will only be shown if it is not zero.
> +
> + nr_dying_subsys_<cgroup_subsys>
> + Total number of dying cgroups associated with that cgroup
> + subsystem (e.g. memory) beneath the current cgroup.
> + An entry will only be shown if it is not zero.
> +
> cgroup.freeze
> A read-write single value file which exists on non-root cgroups.
> Allowed values are "0" and "1". The default is "0".
> @@ -2930,8 +2940,8 @@ Deprecated v1 Core Features
>
> - "cgroup.clone_children" is removed.
>
> -- /proc/cgroups is meaningless for v2. Use "cgroup.controllers" file
> - at the root instead.
> +- /proc/cgroups is meaningless for v2. Use "cgroup.controllers" or
> + "cgroup.stat" files at the root instead.
>
>
> Issues with v1 and Rationales for v2
> diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
> index b36690ca0d3f..62de18874508 100644
> --- a/include/linux/cgroup-defs.h
> +++ b/include/linux/cgroup-defs.h
> @@ -210,6 +210,13 @@ struct cgroup_subsys_state {
> * fields of the containing structure.
> */
> struct cgroup_subsys_state *parent;
> +
> + /*
> + * Keep track of total numbers of visible and dying descendant CSSes.
> + * Protected by cgroup_mutex.
> + */
> + int nr_descendants;
> + int nr_dying_descendants;
> };
>
> /*
> diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
> index c8e4b62b436a..cf4fc1c109e2 100644
> --- a/kernel/cgroup/cgroup.c
> +++ b/kernel/cgroup/cgroup.c
> @@ -3669,12 +3669,36 @@ static int cgroup_events_show(struct seq_file *seq, void *v)
> static int cgroup_stat_show(struct seq_file *seq, void *v)
> {
> struct cgroup *cgroup = seq_css(seq)->cgroup;
> + struct cgroup_subsys_state *css;
> + int ssid;
>
> seq_printf(seq, "nr_descendants %d\n",
> cgroup->nr_descendants);
> seq_printf(seq, "nr_dying_descendants %d\n",
> cgroup->nr_dying_descendants);
>
> + /*
> + * Show the number of live and dying csses associated with each of
> + * non-inhibited cgroup subsystems bound to cgroup v2 if non-zero.
> + *
> + * Without proper lock protection, racing is possible. So the
> + * numbers may not be consistent when that happens.
> + */
> + rcu_read_lock();
> + for_each_css(css, ssid, cgroup) {
> + if ((BIT(ssid) & cgrp_dfl_inhibit_ss_mask) ||
> + (cgroup_subsys[ssid]->root != &cgrp_dfl_root))
> + continue;
> +
> + seq_printf(seq, "nr_subsys_%s %d\n", cgroup_subsys[ssid]->name,
> + css->nr_descendants + 1);
> + /* Current css is online */
> + if (css->nr_dying_descendants)
> + seq_printf(seq, "nr_dying_subsys_%s %d\n",
> + cgroup_subsys[ssid]->name,
> + css->nr_dying_descendants);
> + }
> + rcu_read_unlock();
> return 0;
> }
>
> @@ -5424,6 +5448,8 @@ static void css_release_work_fn(struct work_struct *work)
> list_del_rcu(&css->sibling);
>
> if (ss) {
> + struct cgroup_subsys_state *parent_css;
> +
> /* css release path */
> if (!list_empty(&css->rstat_css_node)) {
> cgroup_rstat_flush(cgrp);
> @@ -5433,6 +5459,14 @@ static void css_release_work_fn(struct work_struct *work)
> cgroup_idr_replace(&ss->css_idr, NULL, css->id);
> if (ss->css_released)
> ss->css_released(css);
> +
> + WARN_ON_ONCE(css->nr_descendants || css->nr_dying_descendants);
> + parent_css = css->parent;
> + while (parent_css) {
> + parent_css->nr_dying_descendants--;
> + parent_css = parent_css->parent;
> + }
> + css_put(css->parent); /* Parent can be freed now */
> } else {
> struct cgroup *tcgrp;
>
> @@ -5517,8 +5551,11 @@ static int online_css(struct cgroup_subsys_state *css)
> rcu_assign_pointer(css->cgroup->subsys[ss->id], css);
>
> atomic_inc(&css->online_cnt);
> - if (css->parent)
> + if (css->parent) {
> atomic_inc(&css->parent->online_cnt);
> + while ((css = css->parent))
> + css->nr_descendants++;
> + }
> }
> return ret;
> }
> @@ -5540,6 +5577,19 @@ static void offline_css(struct cgroup_subsys_state *css)
> RCU_INIT_POINTER(css->cgroup->subsys[ss->id], NULL);
>
> wake_up_all(&css->cgroup->offline_waitq);
> +
> + /*
> + * Get a reference to parent css to ensure reliable access to its
> + * nr_dying_descendants until after this child css is ready to be
> + * freed.
> + */
> + if (css->parent)
> + css_get(css->parent);
I think this blob can be dropped: css has a reference to their parent up to
very last moment, see css_free_rwork_fn().
And the corresponding css_put() can be dropped too.
With this thing fixed, please, feel free to add
Acked-by: Roman Gushchin <roman.gushchin@linux.dev> .
Thank you!
next prev parent reply other threads:[~2024-07-11 3:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-11 2:51 [PATCH-cgroup v4] cgroup: Show # of subsystem CSSes in cgroup.stat Waiman Long
2024-07-11 3:26 ` Roman Gushchin [this message]
2024-07-11 12:01 ` Waiman Long
2024-07-11 13:25 ` Kamalesh Babulal
2024-07-25 13:15 ` Michal Koutný
2024-07-25 20:05 ` Waiman Long
2024-07-26 8:19 ` Michal Koutný
2024-07-26 20:04 ` Tejun Heo
2024-07-26 20:36 ` Waiman Long
[not found] ` <79fcaba1-552b-4969-84fc-70c5151508a5@redhat.com>
2024-07-26 20:42 ` Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zo9Q063eF8CdVyR1@google.com \
--to=roman.gushchin@linux.dev \
--cc=cgroups@vger.kernel.org \
--cc=corbet@lwn.net \
--cc=hannes@cmpxchg.org \
--cc=kamalesh.babulal@oracle.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan.x@bytedance.com \
--cc=longman@redhat.com \
--cc=mkoutny@suse.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.