From: Niklas Cassel <cassel@kernel.org>
To: Igor Pylypiv <ipylypiv@google.com>
Cc: Damien Le Moal <dlemoal@kernel.org>, Tejun Heo <tj@kernel.org>,
Hannes Reinecke <hare@suse.de>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 5/8] ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()
Date: Mon, 1 Jul 2024 23:12:56 +0200 [thread overview]
Message-ID: <ZoMb2MaDZKJndm0a@ryzen.lan> (raw)
In-Reply-To: <20240701195758.1045917-6-ipylypiv@google.com>
On Mon, Jul 01, 2024 at 07:57:55PM +0000, Igor Pylypiv wrote:
> ATA device id is not used in ata_to_sense_error().
>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
> Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
> ---
> drivers/ata/libata-scsi.c | 9 ++++-----
> 1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index c11ae77d3ca6..92d75780fc3b 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -785,7 +785,6 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
>
> /**
> * ata_to_sense_error - convert ATA error to SCSI error
> - * @id: ATA device number
> * @drv_stat: value contained in ATA status register
> * @drv_err: value contained in ATA error register
> * @sk: the sense key we'll fill out
> @@ -799,8 +798,8 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
> * LOCKING:
> * spin_lock_irqsave(host lock)
> */
> -static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
> - u8 *asc, u8 *ascq)
> +static void ata_to_sense_error(u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
> + u8 *ascq)
> {
> int i;
>
> @@ -934,7 +933,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
> */
> if (qc->err_mask ||
> tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
> - ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
> + ata_to_sense_error(tf->status, tf->error,
> &sense_key, &asc, &ascq);
> ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
> } else {
> @@ -973,7 +972,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
> */
> if (qc->err_mask ||
> tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
> - ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
> + ata_to_sense_error(tf->status, tf->error,
> &sense_key, &asc, &ascq);
> ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq);
> } else {
> --
> 2.45.2.803.g4e1b14247a-goog
>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
next prev parent reply other threads:[~2024-07-01 21:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-01 19:57 [PATCH v4 0/8] ATA PASS-THROUGH sense data fixes Igor Pylypiv
2024-07-01 19:57 ` [PATCH v4 1/8] ata: libata-scsi: Fix offsets for the fixed format sense data Igor Pylypiv
2024-07-01 21:09 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 2/8] ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1 Igor Pylypiv
2024-07-01 21:15 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 3/8] ata: libata-scsi: Honour the D_SENSE bit for CK_COND=1 and no error Igor Pylypiv
2024-07-01 21:12 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 4/8] ata: libata-scsi: Remove redundant sense_buffer memsets Igor Pylypiv
2024-07-01 21:12 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 5/8] ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error() Igor Pylypiv
2024-07-01 21:12 ` Niklas Cassel [this message]
2024-07-01 19:57 ` [PATCH v4 6/8] ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf() Igor Pylypiv
2024-07-01 21:13 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 7/8] ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf Igor Pylypiv
2024-07-01 21:13 ` Niklas Cassel
2024-07-01 19:57 ` [PATCH v4 8/8] ata: libata-scsi: Make ata_scsi_qc_complete() more readable Igor Pylypiv
2024-07-01 21:15 ` Niklas Cassel
2024-07-02 2:50 ` Igor Pylypiv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZoMb2MaDZKJndm0a@ryzen.lan \
--to=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=hare@suse.de \
--cc=ipylypiv@google.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.