Re: [PATCH v2] remoteproc: k3-dsp: Fix log levels where appropriate

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Wed, Jun 26, 2024 at 12:14:38PM -0700, Garrett Giordano wrote:
> Driver was logging information as errors. Changed dev_err to dev_dbg
> where appropriate.
> 
> Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
> ---
> -v2
>   - Change from dev_info to dev_dbg
>   - Drop k3-r5 PATCH
> ---
>  drivers/remoteproc/ti_k3_dsp_remoteproc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied.

Thanks,
Mathieu

> diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> index 3555b535b168..a22d41689a7d 100644
> --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> @@ -327,7 +327,7 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
>  		goto put_mbox;
>  	}
> 
> -	dev_err(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr);
> +	dev_dbg(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr);
>  	ret = ti_sci_proc_set_config(kproc->tsp, boot_addr, 0, 0);
>  	if (ret)
>  		goto put_mbox;
> --
> 2.25.1
>