From: Stephan Gerhold <stephan.gerhold@linaro.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Rob Clark <robdclark@chromium.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings
Date: Wed, 7 Aug 2024 14:42:31 +0200 [thread overview]
Message-ID: <ZrNrtx1qvPYatpsw@linaro.org> (raw)
In-Reply-To: <20240806202218.9060-1-robdclark@gmail.com>
On Tue, Aug 06, 2024 at 01:22:17PM -0700, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
>
> Use the correct panel compatible, and wire up enable-gpio. It is wired
> up in the same way as the x1e80100-crd.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Thanks for the update!
> ---
> Corresponding schema update is in drm-misc-fixes
>
> [1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02
> commit: 1c4a057d01f4432704c4dc8842b6e888a91d95df
>
> .../dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index 70977e9fa266..3c13331a9ef4 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -190,7 +190,6 @@ vreg_edp_3p3: regulator-edp-3p3 {
> pinctrl-0 = <&edp_reg_en>;
> pinctrl-names = "default";
>
> - regulator-always-on;
> regulator-boot-on;
> };
>
> @@ -592,9 +591,13 @@ &mdss_dp3 {
>
> aux-bus {
> panel {
> - compatible = "edp-panel";
> + compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> power-supply = <&vreg_edp_3p3>;
>
> + pinctrl-0 = <&edp_bl_en>;
> + pinctrl-names = "default";
> +
> port {
> edp_panel_in: endpoint {
> remote-endpoint = <&mdss_dp3_out>;
> @@ -669,6 +672,16 @@ &pcie6a_phy {
> status = "okay";
> };
>
> +&pmc8380_3_gpios {
> + edp_bl_en: edp-bl-en-state {
> + pins = "gpio4";
> + function = "normal";
> + power-source = <0>;
> + input-disable;
> + output-enable;
> + };
> +};
> +
> &qupv3_0 {
> status = "okay";
> };
> --
> 2.45.2
>
next prev parent reply other threads:[~2024-08-07 12:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-06 20:22 [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings Rob Clark
2024-08-07 12:42 ` Stephan Gerhold [this message]
2024-08-15 20:40 ` Bjorn Andersson
-- strict thread matches above, loose matches on Subject: below --
2024-08-07 5:14 kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrNrtx1qvPYatpsw@linaro.org \
--to=stephan.gerhold@linaro.org \
--cc=abel.vesa@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@chromium.org \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.