From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: Jiri Pirko <jiri@resnulli.us>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org,
Piotr Raczynski <piotr.raczynski@intel.com>,
jiri@nvidia.com, shayd@nvidia.com, wojciech.drewek@intel.com,
horms@kernel.org, sridhar.samudrala@intel.com,
mateusz.polchlopek@intel.com,
kalesh-anakkur.purayil@broadcom.com, michal.kubiak@intel.com,
pio.raczynski@gmail.com, przemyslaw.kitszel@intel.com,
jacob.e.keller@intel.com, maciej.fijalkowski@intel.com,
Rafal Romanowski <rafal.romanowski@intel.com>
Subject: Re: [PATCH net-next v3 06/15] ice: base subfunction aux driver
Date: Fri, 9 Aug 2024 13:49:02 +0200 [thread overview]
Message-ID: <ZrYCLr368aBxJBfW@mev-dev.igk.intel.com> (raw)
In-Reply-To: <ZrX8IDdyfCrXaDv0@nanopsycho.orion>
On Fri, Aug 09, 2024 at 01:23:12PM +0200, Jiri Pirko wrote:
> Thu, Aug 08, 2024 at 07:30:52PM CEST, anthony.l.nguyen@intel.com wrote:
> >From: Piotr Raczynski <piotr.raczynski@intel.com>
> >
> >Implement subfunction driver. It is probe when subfunction port is
> >activated.
> >
> >VSI is already created. During the probe VSI is being configured.
> >MAC unicast and broadcast filter is added to allow traffic to pass.
> >
> >Store subfunction pointer in VSI struct. The same is done for VF
> >pointer. Make union of subfunction and VF pointer as only one of them
> >can be set with one VSI.
> >
> >Reviewed-by: Simon Horman <horms@kernel.org>
> >Reviewed-by: Jiri Pirko <jiri@nvidia.com>
> >Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> >Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
> >Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> >---
> > drivers/net/ethernet/intel/ice/Makefile | 1 +
> > .../ethernet/intel/ice/devlink/devlink_port.c | 41 ++++++
> > .../ethernet/intel/ice/devlink/devlink_port.h | 3 +
> > drivers/net/ethernet/intel/ice/ice.h | 7 +-
> > drivers/net/ethernet/intel/ice/ice_main.c | 10 ++
> > drivers/net/ethernet/intel/ice/ice_sf_eth.c | 139 ++++++++++++++++++
> > drivers/net/ethernet/intel/ice/ice_sf_eth.h | 15 ++
> > 7 files changed, 215 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >
> >diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
> >index 03500e28ac99..4d987f5dcdc1 100644
> >--- a/drivers/net/ethernet/intel/ice/Makefile
> >+++ b/drivers/net/ethernet/intel/ice/Makefile
> >@@ -31,6 +31,7 @@ ice-y := ice_main.o \
> > ice_idc.o \
> > devlink/devlink.o \
> > devlink/devlink_port.o \
> >+ ice_sf_eth.o \
> > ice_ddp.o \
> > ice_fw_update.o \
> > ice_lag.o \
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >index 5d1fe08e4bab..f06baabd0112 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
> >@@ -489,6 +489,47 @@ void ice_devlink_destroy_vf_port(struct ice_vf *vf)
> > devl_port_unregister(&vf->devlink_port);
> > }
> >
> >+/**
> >+ * ice_devlink_create_sf_dev_port - Register virtual port for a subfunction
> >+ * @sf_dev: the subfunction device to create a devlink port for
> >+ *
> >+ * Register virtual flavour devlink port for the subfunction auxiliary device
> >+ * created after activating a dynamically added devlink port.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+int ice_devlink_create_sf_dev_port(struct ice_sf_dev *sf_dev)
> >+{
> >+ struct devlink_port_attrs attrs = {};
> >+ struct ice_dynamic_port *dyn_port;
> >+ struct devlink_port *devlink_port;
> >+ struct devlink *devlink;
> >+ struct ice_vsi *vsi;
> >+
> >+ dyn_port = sf_dev->dyn_port;
> >+ vsi = dyn_port->vsi;
> >+
> >+ devlink_port = &sf_dev->priv->devlink_port;
> >+
> >+ attrs.flavour = DEVLINK_PORT_FLAVOUR_VIRTUAL;
> >+
> >+ devlink_port_attrs_set(devlink_port, &attrs);
> >+ devlink = priv_to_devlink(sf_dev->priv);
> >+
> >+ return devl_port_register(devlink, devlink_port, vsi->idx);
> >+}
> >+
> >+/**
> >+ * ice_devlink_destroy_sf_dev_port - Destroy virtual port for a subfunction
> >+ * @sf_dev: the subfunction device to create a devlink port for
> >+ *
> >+ * Unregisters the virtual port associated with this subfunction.
> >+ */
> >+void ice_devlink_destroy_sf_dev_port(struct ice_sf_dev *sf_dev)
> >+{
> >+ devl_port_unregister(&sf_dev->priv->devlink_port);
> >+}
> >+
> > /**
> > * ice_dealloc_dynamic_port - Deallocate and remove a dynamic port
> > * @dyn_port: dynamic port instance to deallocate
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >index 08ebf56664a5..97b21b58c300 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
> >@@ -5,6 +5,7 @@
> > #define _DEVLINK_PORT_H_
> >
> > #include "../ice.h"
> >+#include "../ice_sf_eth.h"
> >
> > /**
> > * struct ice_dynamic_port - Track dynamically added devlink port instance
> >@@ -34,6 +35,8 @@ int ice_devlink_create_vf_port(struct ice_vf *vf);
> > void ice_devlink_destroy_vf_port(struct ice_vf *vf);
> > int ice_devlink_create_sf_port(struct ice_dynamic_port *dyn_port);
> > void ice_devlink_destroy_sf_port(struct ice_dynamic_port *dyn_port);
> >+int ice_devlink_create_sf_dev_port(struct ice_sf_dev *sf_dev);
> >+void ice_devlink_destroy_sf_dev_port(struct ice_sf_dev *sf_dev);
> >
> > #define ice_devlink_port_to_dyn(port) \
> > container_of(port, struct ice_dynamic_port, devlink_port)
> >diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
> >index d61f8e602cac..0046684004ff 100644
> >--- a/drivers/net/ethernet/intel/ice/ice.h
> >+++ b/drivers/net/ethernet/intel/ice/ice.h
> >@@ -449,7 +449,12 @@ struct ice_vsi {
> > struct_group_tagged(ice_vsi_cfg_params, params,
> > struct ice_port_info *port_info; /* back pointer to port_info */
> > struct ice_channel *ch; /* VSI's channel structure, may be NULL */
> >- struct ice_vf *vf; /* VF associated with this VSI, may be NULL */
> >+ union {
> >+ /* VF associated with this VSI, may be NULL */
> >+ struct ice_vf *vf;
> >+ /* SF associated with this VSI, may be NULL */
> >+ struct ice_dynamic_port *sf;
> >+ };
> > u32 flags; /* VSI flags used for rebuild and configuration */
> > enum ice_vsi_type type; /* the type of the VSI */
> > );
> >diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> >index e10f10a21c95..bdd88617ec9b 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_main.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_main.c
> >@@ -15,6 +15,7 @@
> > #include "ice_dcb_nl.h"
> > #include "devlink/devlink.h"
> > #include "devlink/devlink_port.h"
> >+#include "ice_sf_eth.h"
> > #include "ice_hwmon.h"
> > /* Including ice_trace.h with CREATE_TRACE_POINTS defined will generate the
> > * ice tracepoint functions. This must be done exactly once across the
> >@@ -5908,8 +5909,16 @@ static int __init ice_module_init(void)
> > goto err_dest_lag_wq;
> > }
> >
> >+ status = ice_sf_driver_register();
> >+ if (status) {
> >+ pr_err("Failed to register SF driver, err %d\n", status);
> >+ goto err_sf_driver;
> >+ }
> >+
> > return 0;
> >
> >+err_sf_driver:
> >+ pci_unregister_driver(&ice_driver);
> > err_dest_lag_wq:
> > destroy_workqueue(ice_lag_wq);
> > ice_debugfs_exit();
> >@@ -5927,6 +5936,7 @@ module_init(ice_module_init);
> > */
> > static void __exit ice_module_exit(void)
> > {
> >+ ice_sf_driver_unregister();
> > pci_unregister_driver(&ice_driver);
> > ice_debugfs_exit();
> > destroy_workqueue(ice_wq);
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.c b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >new file mode 100644
> >index 000000000000..abe495c2d033
> >--- /dev/null
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
> >@@ -0,0 +1,139 @@
> >+// SPDX-License-Identifier: GPL-2.0
> >+/* Copyright (c) 2024, Intel Corporation. */
> >+#include "ice.h"
> >+#include "ice_lib.h"
> >+#include "ice_fltr.h"
> >+#include "ice_sf_eth.h"
> >+#include "devlink/devlink_port.h"
> >+#include "devlink/devlink.h"
> >+
> >+/**
> >+ * ice_sf_dev_probe - subfunction driver probe function
> >+ * @adev: pointer to the auxiliary device
> >+ * @id: pointer to the auxiliary_device id
> >+ *
> >+ * Configure VSI and netdev resources for the subfunction device.
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+static int ice_sf_dev_probe(struct auxiliary_device *adev,
> >+ const struct auxiliary_device_id *id)
> >+{
> >+ struct ice_sf_dev *sf_dev = ice_adev_to_sf_dev(adev);
> >+ struct ice_dynamic_port *dyn_port = sf_dev->dyn_port;
> >+ struct ice_vsi *vsi = dyn_port->vsi;
> >+ struct ice_pf *pf = dyn_port->pf;
> >+ struct device *dev = &adev->dev;
> >+ struct ice_sf_priv *priv;
> >+ struct devlink *devlink;
> >+ int err;
> >+
> >+ vsi->type = ICE_VSI_SF;
> >+ vsi->port_info = pf->hw.port_info;
> >+ vsi->flags = ICE_VSI_FLAG_INIT;
> >+
> >+ priv = ice_allocate_sf(&adev->dev, pf);
> >+ if (!priv) {
> >+ dev_err(dev, "Subfunction devlink alloc failed");
> >+ return -ENOMEM;
> >+ }
> >+
> >+ priv->dev = sf_dev;
> >+ sf_dev->priv = priv;
> >+ devlink = priv_to_devlink(priv);
> >+
> >+ devl_lock(devlink);
> >+
> >+ err = ice_vsi_cfg(vsi);
> >+ if (err) {
> >+ dev_err(dev, "Subfunction vsi config failed");
> >+ goto err_free_devlink;
> >+ }
> >+ vsi->sf = dyn_port;
> >+
> >+ err = ice_devlink_create_sf_dev_port(sf_dev);
> >+ if (err) {
> >+ dev_err(dev, "Cannot add ice virtual devlink port for subfunction");
> >+ goto err_vsi_decfg;
> >+ }
> >+
> >+ err = devl_port_fn_devlink_set(&dyn_port->devlink_port, devlink);
> >+ if (err) {
> >+ dev_err(dev, "Can't link devlink instance to SF devlink port");
> >+ goto err_devlink_destroy;
> >+ }
> >+
> >+ ice_napi_add(vsi);
> >+ devl_unlock(devlink);
> >+
> >+ devlink_register(devlink);
>
> Use devl_register() and do it before you call devl_unlock() :)
>
Ok, I will
> >+
> >+ return 0;
> >+
> >+err_devlink_destroy:
> >+ ice_devlink_destroy_sf_dev_port(sf_dev);
> >+err_vsi_decfg:
> >+ ice_vsi_decfg(vsi);
> >+err_free_devlink:
> >+ devl_unlock(devlink);
> >+ devlink_free(devlink);
> >+ return err;
> >+}
> >+
> >+/**
> >+ * ice_sf_dev_remove - subfunction driver remove function
> >+ * @adev: pointer to the auxiliary device
> >+ *
> >+ * Deinitalize VSI and netdev resources for the subfunction device.
> >+ */
> >+static void ice_sf_dev_remove(struct auxiliary_device *adev)
> >+{
> >+ struct ice_sf_dev *sf_dev = ice_adev_to_sf_dev(adev);
> >+ struct ice_dynamic_port *dyn_port = sf_dev->dyn_port;
> >+ struct ice_vsi *vsi = dyn_port->vsi;
> >+ struct devlink *devlink;
> >+
> >+ devlink = priv_to_devlink(sf_dev->priv);
> >+ devl_lock(devlink);
> >+
> >+ ice_vsi_close(vsi);
> >+
> >+ ice_devlink_destroy_sf_dev_port(sf_dev);
> >+ devl_unregister(devlink);
>
> Interesting, you call devl_unregister() here...
I forgot to move and use devl_register in probe.
>
>
> >+ devl_unlock(devlink);
> >+ devlink_free(devlink);
> >+ ice_vsi_decfg(vsi);
> >+}
> >+
> >+static const struct auxiliary_device_id ice_sf_dev_id_table[] = {
> >+ { .name = "ice.sf", },
> >+ { },
> >+};
> >+
> >+MODULE_DEVICE_TABLE(auxiliary, ice_sf_dev_id_table);
> >+
> >+static struct auxiliary_driver ice_sf_driver = {
> >+ .name = "sf",
> >+ .probe = ice_sf_dev_probe,
> >+ .remove = ice_sf_dev_remove,
> >+ .id_table = ice_sf_dev_id_table
> >+};
> >+
> >+/**
> >+ * ice_sf_driver_register - Register new auxiliary subfunction driver
> >+ *
> >+ * Return: zero on success or an error code on failure.
> >+ */
> >+int ice_sf_driver_register(void)
> >+{
> >+ return auxiliary_driver_register(&ice_sf_driver);
> >+}
> >+
> >+/**
> >+ * ice_sf_driver_unregister - Unregister new auxiliary subfunction driver
> >+ *
> >+ */
> >+void ice_sf_driver_unregister(void)
> >+{
> >+ auxiliary_driver_unregister(&ice_sf_driver);
> >+}
> >diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.h b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >index 267da33a0135..e972c50f96c9 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
> >@@ -7,9 +7,24 @@
> > #include <linux/auxiliary_bus.h>
> > #include "ice.h"
> >
> >+struct ice_sf_dev {
> >+ struct auxiliary_device adev;
> >+ struct ice_dynamic_port *dyn_port;
> >+ struct ice_sf_priv *priv;
> >+};
> >+
> > struct ice_sf_priv {
> > struct ice_sf_dev *dev;
> > struct devlink_port devlink_port;
> > };
> >
> >+static inline struct
> >+ice_sf_dev *ice_adev_to_sf_dev(struct auxiliary_device *adev)
> >+{
> >+ return container_of(adev, struct ice_sf_dev, adev);
> >+}
> >+
> >+int ice_sf_driver_register(void);
> >+void ice_sf_driver_unregister(void);
> >+
> > #endif /* _ICE_SF_ETH_H_ */
> >--
> >2.42.0
> >
> >
next prev parent reply other threads:[~2024-08-09 11:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 17:30 [PATCH net-next v3 00/15][pull request] ice: support devlink subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 01/15] ice: add new VSI type for subfunctions Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 02/15] ice: export ice ndo_ops functions Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 03/15] ice: add basic devlink subfunctions support Tony Nguyen
2024-08-09 11:16 ` Jiri Pirko
2024-08-09 11:47 ` Michal Swiatkowski
2024-08-10 6:50 ` Jiri Pirko
2024-08-12 4:24 ` Michal Swiatkowski
2024-08-12 9:53 ` Jiri Pirko
2024-08-08 17:30 ` [PATCH net-next v3 04/15] ice: treat subfunction VSI the same as PF VSI Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 05/15] ice: allocate devlink for subfunction Tony Nguyen
2024-08-09 11:17 ` Jiri Pirko
2024-08-08 17:30 ` [PATCH net-next v3 06/15] ice: base subfunction aux driver Tony Nguyen
2024-08-09 11:23 ` Jiri Pirko
2024-08-09 11:49 ` Michal Swiatkowski [this message]
2024-08-08 17:30 ` [PATCH net-next v3 07/15] ice: implement netdev for subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 08/15] ice: make representor code generic Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 09/15] ice: create port representor for SF Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 10/15] ice: don't set target VSI for subfunction Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 11/15] ice: check if SF is ready in ethtool ops Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 12/15] ice: implement netdevice ops for SF representor Tony Nguyen
2024-08-08 17:30 ` [PATCH net-next v3 13/15] ice: support subfunction devlink Tx topology Tony Nguyen
2024-08-08 17:31 ` [PATCH net-next v3 14/15] ice: basic support for VLAN in subfunctions Tony Nguyen
2024-08-08 17:31 ` [PATCH net-next v3 15/15] ice: allow to activate and deactivate subfunction Tony Nguyen
2024-08-09 11:26 ` Jiri Pirko
2024-08-09 11:49 ` Michal Swiatkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrYCLr368aBxJBfW@mev-dev.igk.intel.com \
--to=michal.swiatkowski@linux.intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=jiri@nvidia.com \
--cc=jiri@resnulli.us \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kuba@kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=mateusz.polchlopek@intel.com \
--cc=michal.kubiak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pio.raczynski@gmail.com \
--cc=piotr.raczynski@intel.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rafal.romanowski@intel.com \
--cc=shayd@nvidia.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.