All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ido Schimmel <idosch@idosch.org>
To: Jakub Kicinski <kuba@kernel.org>
Cc: davem@davemloft.net, netdev@vger.kernel.org, edumazet@google.com,
	pabeni@redhat.com, shuah@kernel.org,
	linux-kselftest@vger.kernel.org
Subject: Re: [PATCH net-next] selftests: net: add helper for checking if nettest is available
Date: Sun, 18 Aug 2024 19:05:46 +0300	[thread overview]
Message-ID: <ZsIb2joq2MjBwk1u@shredder> (raw)
In-Reply-To: <20240817183848.658443-1-kuba@kernel.org>

On Sat, Aug 17, 2024 at 11:38:48AM -0700, Jakub Kicinski wrote:
> A few tests check if nettest exists in the $PATH before adding
> $PWD to $PATH and re-checking. They don't discard stderr on
> the first check (and nettest is built as part of selftests,
> so it's pretty normal for it to not be available in system $PATH).
> This leads to output noise:
> 
>   which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
> 
> Add a common helper for the check which does silence stderr.
> 
> There is another small functional change hiding here, because pmtu.sh
> used to return from the test case rather than completely exit.
> Building nettest is not hard, there should be no need to maintain
> the ability to selectively skip cases in its absence.
> 
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> ---
> CC: shuah@kernel.org
> CC: linux-kselftest@vger.kernel.org
> ---
>  tools/testing/selftests/net/fcnal-test.sh         |  9 +--------
>  tools/testing/selftests/net/lib.sh                | 15 +++++++++++++++
>  tools/testing/selftests/net/pmtu.sh               |  8 +-------
>  tools/testing/selftests/net/settings              |  1 +
>  tools/testing/selftests/net/unicast_extensions.sh |  9 +--------
>  5 files changed, 19 insertions(+), 23 deletions(-)

Nice improvement. fib_rule_tests.sh can also benefit from this helper
and so does vrf_route_leaking.sh which assumes 'nettest' is available
in the working directory.

Do you want to fold the diff below into v2 (I tested it)?

diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh
index ec9dbfa6507b..1d58b3b87465 100755
--- a/tools/testing/selftests/net/fib_rule_tests.sh
+++ b/tools/testing/selftests/net/fib_rule_tests.sh
@@ -51,31 +51,6 @@ log_test()
 	fi
 }
 
-check_nettest()
-{
-	if which nettest > /dev/null 2>&1; then
-		return 0
-	fi
-
-	# Add the selftest directory to PATH if not already done
-	if [ "${SELFTEST_PATH}" = "" ]; then
-		SELFTEST_PATH="$(dirname $0)"
-		PATH="${PATH}:${SELFTEST_PATH}"
-
-		# Now retry with the new path
-		if which nettest > /dev/null 2>&1; then
-			return 0
-		fi
-
-		if [ "${ret}" -eq 0 ]; then
-			ret="${ksft_skip}"
-		fi
-		echo "nettest not found (try 'make -C ${SELFTEST_PATH} nettest')"
-	fi
-
-	return 1
-}
-
 setup()
 {
 	set -e
@@ -334,11 +309,6 @@ fib_rule6_connect_test()
 	echo
 	echo "IPv6 FIB rule connect tests"
 
-	if ! check_nettest; then
-		echo "SKIP: Could not run test without nettest tool"
-		return
-	fi
-
 	setup_peer
 	$IP -6 rule add dsfield 0x04 table $RTABLE_PEER
 
@@ -578,11 +548,6 @@ fib_rule4_connect_test()
 	echo
 	echo "IPv4 FIB rule connect tests"
 
-	if ! check_nettest; then
-		echo "SKIP: Could not run test without nettest tool"
-		return
-	fi
-
 	setup_peer
 	$IP -4 rule add dsfield 0x04 table $RTABLE_PEER
 
@@ -674,6 +639,8 @@ if [ ! -x "$(command -v ip)" ]; then
 	exit $ksft_skip
 fi
 
+check_gen_prog "nettest"
+
 # start clean
 cleanup &> /dev/null
 setup
diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh
index 152171fb1fc8..e9c2f71da207 100755
--- a/tools/testing/selftests/net/vrf_route_leaking.sh
+++ b/tools/testing/selftests/net/vrf_route_leaking.sh
@@ -59,7 +59,6 @@
 # while it is forwarded between different vrfs.
 
 source lib.sh
-PATH=$PWD:$PWD/tools/testing/selftests/net:$PATH
 VERBOSE=0
 PAUSE_ON_FAIL=no
 DEFAULT_TTYPE=sym
@@ -636,6 +635,8 @@ EOF
 # Some systems don't have a ping6 binary anymore
 command -v ping6 > /dev/null 2>&1 && ping6=$(command -v ping6) || ping6=$(command -v ping)
 
+check_gen_prog "nettest"
+
 TESTS_IPV4="ipv4_ping_ttl ipv4_traceroute ipv4_ping_frag ipv4_ping_local ipv4_tcp_local
 ipv4_udp_local ipv4_ping_ttl_asym ipv4_traceroute_asym"
 TESTS_IPV6="ipv6_ping_ttl ipv6_traceroute ipv6_ping_local ipv6_tcp_local ipv6_udp_local


  reply	other threads:[~2024-08-18 16:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-17 18:38 [PATCH net-next] selftests: net: add helper for checking if nettest is available Jakub Kicinski
2024-08-18 16:05 ` Ido Schimmel [this message]
2024-08-20  0:41   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZsIb2joq2MjBwk1u@shredder \
    --to=idosch@idosch.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.